1. Produk Langkungview
The SLMPLEFUN 433Mhz Wireless Remote Control Switch is a robust and versatile device designed for controlling various electrical appliances. Featuring an IP65 waterproof rating, a high-power 30A relay, and an impressive 500-meter control range in open areas, it is suitable for both indoor and outdoor applications. This manual provides detailed instructions for its safe and effective use.
Image: The SLMPLEFUN 433Mhz Wireless Remote Control Switch with its remote, highlighting key features like IP65 waterproof, 30A current, AC100-240V input, and 500m control distance.
2. Spésifikasi
| Fitur | Receiver (Outdoor Switch) | Jauh Controller |
|---|---|---|
| Nomer modél | 2201H2 | N/A |
| Gawé Voltage | AC 100V ~ 240V | N/A |
| Max Wayah | 30A | N/A |
| Frékuénsi RF | 433MHz | 433MHz |
| Suhu Gawé | -30~+80 Celsius | N/A |
| Narima Sensitipitas | >-105dBm | N/A |
| Storage Remote Controls | Nepi ka 25 lembar | N/A |
| Support Encoding | 1527 Learning code | 1527 Learning code |
| RF Operating Mode | ASK panarimaan nirkabel superheterodyne | N/A |
| Rentang Panarima | Up to 500m (theoretical distance in open areas) | Up to 500m (theoretical distance) |
| Diménsi | 47 * 29 * 93 mm | 90 * 40 * 14 mm |
| Batré | N/A | 1x 23A 12V (Included) |
| Peunteun waterproof | IP65 | N/A |
| Sertifikasi | CE, RoHS | N/A |
3. Émbaran Kasalametan
- Ensure the power supply is disconnected before any installation or wiring to prevent electric shock.
- The device operates on AC 100V-240V. Do not connect to DC power sources unless explicitly stated for a specific model.
- For inductive loads with power greater than 2000W, it is essential to connect an external AC contactor to prevent damage to the switch and ensure safe operation.
- The receiving module is IP65 waterproof, suitable for outdoor exposure to rain, wind, and sun. However, ensure all wiring connections are properly sealed, especially using the provided hot-melt wiring conduit.
- Do not attempt to repair or modify the device yourself. Refer to qualified personnel for service.
Image: Wiring diagram illustrating the connection of an AC contactor for inductive loads exceeding 2000W.
4. Eusi Paket
Depending on your purchase option, your package may include:
- SLMPLEFUN 433Mhz Wireless Remote Control Receiver (Outdoor Switch)
- Digital Remote Controller(s) (1, 2, 3, or 4 remotes)
- Hot-melt wiring conduit for waterproof connections
- 1x 23A 12V Battery (for each remote control)
5. Pamasangan
5.1 Ngakabelkeun Panarima
The receiver is designed for simple wiring. Follow the diagram below for standard connections:
Image: Simple wiring diagram showing Live (L) and Neutral (N) connections for the outdoor switch and a light bulb.
- Connect the Live (L) and Neutral (N) wires from your AC 100-240V power source to the 'Input' terminals of the receiver.
- Connect the Live (L) and Neutral (N) wires of your appliance (e.g., lamp, pump, fan) to the 'Output' terminals of the receiver.
- Pastikeun sadaya sambungan aman.
5.2 Waterproofing Connections
For outdoor use, it is crucial to properly seal the wire interfaces using the provided hot-melt wiring conduit:
Image: Step-by-step guide on how to use hot-melt wiring conduit for waterproof connections.
- Strip the ends of the wires to be connected.
- Insert one wire end into the conduit.
- Twist the wire ends together securely.
- Slide the conduit over the twisted connection.
- Apply heat (e.g., with a lighter) to the conduit until it shrinks and seals tightly around the wires, creating a waterproof seal.
6. Operasi
The remote control switch supports multiple operating modes. The following video demonstrates the programming process for each mode:
Video: Demonstration of programming the remote control switch into different operating modes (Momentary, Toggle, Latched, Delay, and Default Original State).
6.1 Clearing Existing Data (Reset)
Before programming a new mode or if the remote is not responding, it is recommended to clear all existing data from the receiver.
- Pencét tombol diajar dina panarima 8 kali. The indicator light will flash, confirming that all existing data has been successfully deleted.
6.2 Programming Operating Modes
After clearing the data, you can program the desired operating mode:
Momentary Mode (Mode 1)
The device turns ON when the remote button is pressed and held, and turns OFF when the button is released.
- Press the learning button on the receiver 1 time.
- Then, press the 'ON' button on your remote control 1 time.
Toggle Mode (Mode 2)
Pressing the remote button once turns the device ON. Pressing the same button again turns the device OFF.
- Pencét tombol diajar dina panarima 2 kali.
- Then, press the 'ON' button on your remote control 1 time.
Latched Mode (Mode 3)
Pressing the 'ON' button on the remote turns the device ON. Pressing the 'OFF' button on the remote turns the device OFF.
- Pencét tombol diajar dina panarima 3 kali.
- Then, press the 'ON' button on your remote control 1 time, and then the 'OFF' button 1 time.
Delay Mode (Modes 4, 5, 6)
The device turns ON and stays ON for a set duration (5, 10, or 15 seconds) before automatically turning OFF.
- For 5-second delay: Press the learning button on the receiver 4 times.
- For 10-second delay: Press the learning button on the receiver 5 times.
- For 15-second delay: Press the learning button on the receiver 6 times.
- After selecting the delay, press the 'ON' button on your remote control 1 time.
Default Original State (Mode 7)
This mode allows the switch to return to its previous ON/OFF state when power is restored after an outage.
- Pencét tombol diajar dina panarima 7 kali.
7. Pangropéa
- beberesih: Anggo lawon anu lemes sareng garing pikeun ngabersihkeun alat ieu. Entong nganggo bahan kimia anu keras atanapi pembersih anu abrasif.
- Ngagantian batré: The remote control uses a 23A 12V battery. To replace, open the battery compartment on the back of the remote, remove the old battery, and insert a new one, ensuring correct polarity.
Image: The remote control with its battery compartment open, showing the 23A 12V battery.
8. Cara ngungkulan
- Remote not working after initial setup: The product may be set to a random remote mode from factory testing. Clear all existing data by pressing the learning button 8 times, then reprogram to your desired mode.
- Device not responding to remote: Ensure the remote control battery is not depleted. Check if the receiver is powered on (Power indicator LED should be lit). Re-pair the remote with the receiver following the programming instructions.
- Short control range: Ensure the remote's antenna is extended. Obstacles like thick walls or metal structures can reduce the effective range. In open areas, the range is up to 500m.
- Device not turning ON/OFF correctly: Verify the wiring connections are secure and correct according to the installation diagrams. If using for inductive loads >2000W, confirm an AC contactor is installed.
- Does it work on 12 volt batteries? No, the receiver's working voltage is AC 100V~240V. It is not designed for 12V DC battery operation.
9. Tips pamaké
- Setup Awal: Upon receiving your product, it might be programmed to a random mode due to factory testing. Always perform a data clear (reset) by pressing the learning button 8 times before your first use to ensure a clean slate for programming.
- Sababaraha Remotes: One receiver can support up to approximately 25 remote controllers. This allows for controlling a single device from multiple locations, enhancing convenience and potentially saving energy.
- Kakuatan OutagParipolah: Utilize the 'Default Original State' programming mode (press learning button 7 times) if you want the device to return to its last known ON/OFF state after a power interruption.
10. Garansi jeung Rojongan
SLMPLEFUN is committed to providing quality products and comprehensive after-sales service. If you encounter any issues or have questions regarding your product, please contact our support team for professional assistance.
This product is certified with CE and RoHS standards, ensuring compliance with health, safety, and environmental protection directives.
Image: Display of product certifications, including CE and RoHS.
