TTlock H3/H3F Fingerprint Door Access Control System Instruction Manual

1. Bubuka

The TTlock H3/H3F is an advanced fingerprint door access control system designed for smart, convenient, safe, and efficient access management. It offers multiple unlocking methods and can be managed via the TTLock mobile application, providing a modern solution for various environments from personal homes to corporate offices.

Figure 1: TTlock H3 and H3F Access Control Systems

2. Fitur konci

• Sababaraha Métode Muka konci: App, Password, RFID Card, Fingerprint (H3F only), and Gateway Remote Unlock.
• Manajemén Aplikasi: Generate time-limited passwords, manage users, and check attendance records remotely via the TTLock app.
• Layanan Awan: Data storage in cloud service for remote user management and history checking.
• IP67 waterproof: Dirancang pikeun dianggo di luar ruangan, tahan angin sareng hujan.
• Keypad Protection: Keypad locks for 5 minutes after 5 incorrect passcode entries.
• Pseudo Passcode: Unlock by entering any digits, provided the last digits form the real passcode.
• Konci otomatis: Automatically locks within 5 seconds of unlocking.
• Pangimeutan sacara real-time: Administrator receives push notifications when a user unlocks via the app.
• Integrasi Smart Home: Compatible with Amazon Alexa and Google Assistant (requires G2 Gateway).

Gambar 2: Sababaraha Métode Muka konci

Figure 3: IP67 Waterproof Rating

3. Spésifikasi

Figure 4: H3/H3F Smart Access Controller Specifications

Gambar 5: Dimensi Produk

4. Eusi Paket

• Access Control Host x1
• Pipa ékspansi x4
• Fixed Bracket x1
• Screws: 4+1
• Manual x1
• Hexagon Screwdriver x1

angka 6: Asesoris kaasup

5. Pamasangan

5.1 Diagram Wiring

Refer to the following diagram for proper wiring connections. Ensure all connections are secure before powering on the device.

Figure 7: General Wiring Diagram for Access Control System

Figure 8: Detailed Wiring Diagram

5.2 Léngkah-léngkah Instalasi

1. Bor liang pikeun kabel: Drill a hole at an appropriate position to make space for the cable to connect to the power source.
2. Pasang pelat pamasangan: Remove the mounting plate from the access controller and fix it on the wall with 4 screws.
3. Sambungkeun kabel: Cut off the connector of the cable, strip and connect the leads to appropriate ports of the power supply according to the illustration (Figure 8).
4. Pasang pangontrol aksés: Nyocogkeun controller aksés kana hook jeung ngalereskeun eta dina piring ningkatna ku screw di handap.

Figure 9: Installation Steps 1 & 2

Figure 10: Installation Step 4

6. Setup jeung Konfigurasi

6.1 Ngundeur Aplikasi sareng Masangkeun

Milarian pikeun "TTLOCK" in your mobile app store (Google Play Store for Android or Apple App Store for iOS) and download the application.

1. Ketok panel pikeun nyaangan sareng ngaktipkeun koncina.
2. On voice prompt "Please add Bluetooth Administrator", activate the APP.
3. Tap the "≡" icon on the upper left corner, tap "+Add Lock", select "Door Lock".
4. Ketok alat nu dipintonkeun dina layar. Antosan sababaraha detik, lajeng nambahkeun hasil.

Notice: If fails, please shut off the APP and Bluetooth, then turn them on and try the above process again.

Gambar 11: Léngkah Nyapasangkeun Aplikasi

Video 1: Demonstration of App Pairing, Passcode, Card, Fingerprint, and Remote Control Setup

6.2 Nambahkeun Kodeu aksés

From the TTLock app, navigate to the 'Passcodes' section. You can generate permanent, timed, one-time, custom, or recurring passcodes. Follow the on-screen prompts to set the desired passcode and its validity period.

Figure 12: Generating Passcodes via Web Sistim

6.3 Adding RFID Cards

In the TTLock app, go to the 'Cards' section and select 'Add Card'. You can set the card's validity as permanent, timed, or recurring. Place the RFID card against the card reader sensor on the access control system when prompted by the app.

Figure 13: Adding an RFID Card

6.4 Adding Fingerprints (H3F only)

For H3F models, navigate to the 'Fingerprints' section in the app. Select 'Add Fingerprint' and follow the instructions to place and remove your finger from the sensor several times until successfully recorded.

Figure 14: Adding a Fingerprint

6.5 Adding Remote Controls

In the app, go to the 'Remote' section and select 'Add Remote'. Follow the app's instructions, which typically involve long-pressing a button on the remote control for a few seconds until an indicator light flashes, then confirming in the app.

6.6 G2 WiFi Gateway (Optional for Remote Control)

To enable remote door opening and control from anywhere via WiFi, you need to purchase and connect a G2 TTLock Bluetooth Gateway. The gateway bridges the Bluetooth connection of the access control system to your home WiFi network.

Figure 15: G2 WiFi Gateway Specifications

Figure 16: Remote Control with G2 WiFi Gateway

Figure 17: Tongtong Lock Gateway Remote Management

6.7 Pamaduan Smart Home

The system supports integration with Amazon Alexa and Google Assistant for voice control, provided a G2 Gateway is connected. Follow the instructions in the TTLock app under 'Work with' to link your smart home accounts.

Figure 18: Alexa and Google Home Integration

Figure 19: Amazon Alexa Setup Details

7. Operasi

7.1 Unlocking with the App

Open the TTLock app, ensure Bluetooth is enabled, and you are within range of the access control system. Tap the lock icon in the app to unlock. Hold to lock.

Figure 20: APP Bluetooth Unlock

7.2 Unlocking with Passcode

Enter your registered passcode on the keypad followed by the '#' key to unlock. The keypad backlight will light up when touched.

7.3 Unlocking with RFID Card

Present a registered RFID card to the card reader area on the access control system to unlock.

7.4 Unlocking with Fingerprint (H3F only)

Place a registered finger on the fingerprint sensor to unlock.

7.5 Muka konci Jarak Jauh

If a G2 WiFi Gateway is installed, you can remotely unlock the door from anywhere using the TTLock app.

8. Tips pamaké

• For remote access and smart home integration (Alexa/Google Assistant), ensure you have a G2 TTLock Bluetooth Gateway.
• The system can store up to 100 fingerprints (H3F model) and 2000 RFID cards, providing ample capacity for various users.
• The TTLock app is the primary management tool; familiarize yourself with its features for optimal use.
• The system does not natively support Tuya or Smartlife apps; it operates with the dedicated TTLock app.

9. Pangropéa

9.1 beberesih

Wipe the access control system's surface with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the acrylic panel.

9.2 Setélan lampu tukang

You can change the backlight settings using specific codes:

• Back lighting always on: *49#admin password#
• Back lighting always off: *49#admin password#0#

Figure 21: Changing Backlight Settings

9.3 Reset to Default Mode

To reset the device to its default factory settings, follow these wiring steps when the power is on:

1. Connect the blue wire (SW) to the purple wire (IN).
2. Connect SW and IN to the black wire (GND) for 3 seconds.
3. Disconnect the black wire (GND) on a beep.
4. Repeat step 2 and step 3 twice until 2 short beeps are heard.

Figure 22: Reset to Default Mode Wiring

10. Cara ngungkulan

• App pairing fails: Ensure Bluetooth is enabled on your phone and the access control system is activated. Try restarting the app and Bluetooth.
• Kadali jauh teu jalan: Verify that the G2 WiFi Gateway is properly installed and connected to both the access control system and your WiFi network. Ensure the distance between the gateway and the smart lock is no more than 32 feet (10 meters).
• Keypad teu ngaréspon: Check the power supply. If the keypad is locked due to multiple incorrect entries, wait for 5 minutes.
• Sidik henteu dikenal: Ensure your finger is clean and dry. Re-register the fingerprint if issues persist.
• Card not recognized: Ensure the RFID card is correctly registered in the app.

11. Garansi jeung Rojongan

11.1 Garansi kawates

Kanggo naon waé cacad dina bahan sareng/atanapi padamelan, anu mésér produk asli tiasa:

1. Balik atawa ménta ngagantian dina 7 poé ti tanggal invoice nu.
2. Nyuhunkeun panggantian dina 15 dinten ti tanggal Invoice.
3. Bisa ménta perbaikan bébas dina 365 poé ti tanggal invoice.

Garansi ieu henteu nutupan cacad anu disababkeun ku modifikasi, robih, nyalahgunakeun atanapi nyiksa fisik produk.

11.2 Perhatosan FCC

Alat ieu saluyu sareng bagian 15 tina Aturan FCC. Operasi tunduk kana dua kaayaan di handap ieu: (1) alat ieu moal ngabalukarkeun gangguan anu ngabahayakeun, sareng (2) alat ieu kedah nampi gangguan anu ditampi, kalebet gangguan anu tiasa nyababkeun operasi anu teu dipikahoyong.

Sagala parobahan atawa modifikasi teu dinyatakeun disatujuan ku pihak jawab minuhan bisa batal wewenang pamaké pikeun beroperasi alat.

CATETAN: Alat ieu geus diuji sarta kapanggih sasuai jeung wates pikeun alat digital Kelas B, nurutkeun Bagian 15 tina Aturan FCC. Watesan ieu dirarancang pikeun nyayogikeun panyalindungan anu wajar tina gangguan anu ngabahayakeun dina pamasangan padumukan. Alat ieu ngahasilkeun, ngagunakeun sareng tiasa mancarkeun énergi frekuensi radio sareng, upami henteu dipasang sareng dianggo saluyu sareng petunjuk, tiasa nyababkeun gangguan anu ngabahayakeun kana komunikasi radio.

Nanging, teu aya jaminan yén gangguan moal lumangsung dina pamasangan khusus. Upami alat ieu nyababkeun gangguan anu ngabahayakeun kana panarimaan radio atanapi televisi, anu tiasa dipastikeun ku cara mareuman sareng ngaktipkeun alat, pangguna didorong pikeun nyobian ngabenerkeun gangguan ku salah sahiji atanapi langkung tina ukuran ieu:

• Reorient atawa mindahkeun anteneu panarima.
• Ningkatkeun separation antara alat jeung panarima.
• Sambungkeun alat-alat kana stop kontak dina sirkuit béda ti nu disambungkeun ka panarima.
• Taroskeun ka dealer atanapi teknisi radio/TV anu berpengalaman pikeun pitulung.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body. Use only the supplied antenna.

11.3 Bantahan

Kami terus-terusan ngaoptimalkeun produk nalika téknologi sareng fitur anyar dikembangkeun. Kusabab ieu, kami ngagaduhan hak pikeun ngarobih produk tanpa aya bewara sateuacana.