1. Bubuka
Thank you for choosing the DuraTech 3.6V Li-ion Rechargeable Screwdriver Set. This compact and versatile electric screwdriver is designed for various household tasks, electronics repair, and light assembly work. Featuring a powerful 3.6V Li-ion battery, dual working modes (auto and manual), and a comprehensive 41-piece bit set, it provides convenience and efficiency for your projects. Please read this manual carefully before use to ensure safe and optimal performance of your tool.
2. Parentah Kasalametan
Salawasna turutan pancegahan kaamanan dasar nalika nganggo alat listrik pikeun ngirangan résiko kahuruan, kejutan listrik, sareng tatu pribadi.
- Kasalametan Area Gawé: Jaga wewengkon gawé anjeun beresih jeung cahayana alus. Wewengkon nu pabalatak atawa poek ngondang kacilakaan. Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
- Kasalametan listrik: Hindarkeun kontak awak sareng permukaan bumi atanapi grounded (contona, pipa, radiator, rentang, kulkas). Ulah ngalaan alat listrik ka hujan atawa kaayaan baseuh.
- Kasalametan Pribadi: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. Always wear appropriate personal protective equipment, such as safety glasses, dust mask, non-skid safety shoes, hard hat, or hearing protection.
- Pamakéan sareng Perawatan Alat: Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Paké Batré jeung Perawatan: Ngecas ukur nganggo carjer anu ditunjuk ku produsén. Anggo alat-alat listrik ngan nganggo bungkus batré anu ditunjuk sacara khusus.
3. Eusi Paket
Punten parios eusi bungkusan saatos nampi pikeun mastikeun yén sadaya barang aya sareng henteu rusak:
- 1 x DuraTech 3.6V Li-ion Rechargeable Screwdriver
- 1 x 41-piece Bit Set (various Phillips, Slotted, Hex, Torx, Pozi, Square bits)
- 1 x Kabel Ngecas USB Tipe-C
- 1 x Kasus Panyimpenan
4. Fitur Produk
The DuraTech 3.6V Li-ion Rechargeable Screwdriver offers the following key features:
- Batré Li-ion 3.6V: Built-in rechargeable lithium-ion battery for cordless convenience and extended run-time.
- Modeu Gawé Ganda: Easily switch between automatic electric operation and manual use for precise control or extra torque.
- Gancang: Delivers 200 RPM speed for efficient tightening or loosening of screws.
- 41-Sapotong Bit Set: Comprehensive set of CR-V steel bits to handle a wide range of applications.
- USB Tipe-C Ngecas: Convenient and fast charging via a standard USB Type-C port.
- Lampu Kerja LED: Integrated LED light illuminates the work area for improved visibility.
- Tempat Bit Magnét: Securely holds bits in place during operation.
- Perlindungan Kaamanan: Ngawengku leuwih-ayeuna, leuwih-voltage, and short-circuit protection for safe charging and operation.
5. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Voltage | 3.6V |
| Jenis Batré | Li-ion (Litium-ion) |
| Laju No-beban | 200 rpm |
| Port ngecas | USB Tipe-C |
| Kasaluyuan Bit | 1/4 inch (6.35mm) Standard Hex Bits |
| Bahan Bit | CR-V Steel |
| Protéksi | Leuwih-ayeuna, Leuwih-voltage, Short-circuit |
| Kira-kira. Beurat | 1.09 kg |
| Kira-kira. Ukuran (L x W x H) | 24 cm x 14 cm x 6 cm |
6. Setélan
6.1 Ngecas Awal
Before first use, fully charge the screwdriver. Refer to Section 8 for detailed charging instructions.
6.2 Nyelapkeun sareng Ngaganti Bit
- Select the appropriate bit from the 41-piece set for your task.
- Insert the hex end of the bit into the Hex Collect (chuck) at the front of the screwdriver. The magnetic bit holder will secure it in place.
- To remove a bit, simply pull it out from the Hex Collect.
7. Parentah Operasi
7.1 Electric Operation (Auto Mode)
The screwdriver features two buttons for forward and reverse operation:
- Forward Mode (Tightening): Press and hold the Forward Button (usually the upper button) to rotate the bit clockwise and tighten screws.
- Reverse Mode (Loosening): Press and hold the Reverse Button (usually the lower button) to rotate the bit counter-clockwise and loosen screws.
The screwdriver will operate at 200 RPM in electric mode.
7.2 Panggunaan Manual
For tasks requiring more precision or higher torque than the electric motor can provide, the screwdriver can be used manually. Simply hold the screwdriver firmly and turn it as you would a traditional screwdriver. The internal clutch allows for manual rotation without resistance from the motor.
7.3 LED Worklight
The integrated LED worklight automatically activates when the screwdriver is in operation, illuminating your work area for better visibility, especially in dimly lit spaces.
8. Ngecas
The DuraTech screwdriver is equipped with a built-in Li-ion battery and charges via a USB Type-C port.
- Locate the USB Type-C charging port on the screwdriver (refer to Figure 3).
- Connect the provided USB Type-C cable to the screwdriver's charging port.
- Connect the other end of the USB cable to a suitable USB power source (e.g., computer USB port, USB wall adapter, power bank).
- Indikator ngecas: During charging, the indicator lights will show the charging status. Typically, red lights indicate charging, and green lights indicate a full charge.
- Once fully charged, disconnect the USB cable from both the power source and the screwdriver.
The screwdriver features built-in protections against over-current, over-voltage, and short-circuit to ensure safe charging.
9. Pangropéa
- beberesih: Keep the tool clean and free from dust and debris. Use a soft, dry cloth to wipe down the screwdriver. Do not use harsh chemicals or abrasive cleaners.
- Panyimpenan Bit: Store the bits in the provided storage case to prevent loss and damage.
- Perawatan batré: For optimal battery life, avoid completely draining the battery frequently. Recharge the screwdriver regularly, even if not in use for extended periods (e.g., every 3-6 months). Store the tool in a cool, dry place.
- Inspeksi umum: Periodically inspect the screwdriver and bits for any signs of wear or damage. Replace worn or damaged bits immediately.
10. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Obeng teu hurung. | Batré béak. | Charge the screwdriver fully (refer to Section 8). |
| Screwdriver does not charge. | Charging cable or adapter is faulty. USB port is not supplying power. | Try a different USB Type-C cable, USB adapter, or USB port. Ensure connections are secure. |
| Obeng teu boga daya atawa bisa eureun nalika dipaké. | Low battery. Overload protection activated. | Recharge the battery. Reduce the load on the screwdriver; use manual mode for very tight screws. |
| Bit slips atanapi strips sirah screw. | Incorrect bit size/type. Worn bit. Excessive force. | Ensure you are using the correct bit for the screw. Replace worn bits. Apply steady, firm pressure and use manual mode if necessary. |
11. Tips pamaké
Taya tips pamaké husus éta sadia ti disadiakeun ulangviews or Q&A content. However, general tips for electric screwdrivers include:
- Always select the correct bit for the screw head to prevent stripping.
- For very tight screws, start in manual mode to break the initial torque, then switch to electric mode.
- Keep the bit perpendicular to the screw head to avoid cam-out.
- Store the screwdriver and bits in their case to protect them from damage and keep them organized.
12. Garansi jeung Rojongan
Kanggo inpormasi garansi, dukungan téknis, atanapi patarosan jasa, mangga ngahubungi penjual atanapi produsén langsung. Simpen resi pameseran anjeun salaku bukti pameseran.
