FIRECORE G60 4D Laser Level User Manual

1. Bubuka

Thank you for choosing the FIRECORE G60 4D Laser Level. This advanced tool is designed to provide precise horizontal and vertical alignment for various construction and DIY projects. Featuring 16 green laser lines and 4x360° full layout coverage, it offers high visibility and versatility. Please read this manual thoroughly before operation to ensure safe and effective use.

2. Émbaran Kasalametan

PERHATOSAN: RADIASI LASER. ULAH neuteup kana balok.

• This product is a Class 2 laser product (IEC/EN 60825-1:2014), with a maximum output power of <1mW.
• Never look directly into the laser beam or point it at others.
• Hindarkeun paparan panon langsung kana sinar laser.
• Do not disassemble the laser level. Repairs should only be performed by authorized service personnel.
• Jauhkeun alat tina jangkauan barudak.
• Use only the specified power supply and battery.

3. Eusi Paket

The FIRECORE G60 4D Laser Level typically includes the following items:

• FIRECORE G60 4D Laser Level
• Kasus Ngalaksanakeun Keras
• Lifting Base (adjustable from 2.5cm to 8cm)
• Basis Puteran
• Dékét témbok
• Panel témbok
• Batré Li-ion 4000mAh
• Remote Control (Battery: CR2032, Voltage: 3V)
• Charger & Type-C Cord
• Manual pamaké

Optional accessories (may be included depending on package):

• FD30 Receiver (includes 2*AAA 1.5V batteries)
• Adjustable bracket for FD30 receiver

Figure 1: G60 4D Laser Level and Standard Accessories

Figure 2: FD30 Receiver and Accessories

4. Spésifikasi

Figure 3: G60 Dimensions and Weight

5. Setélan

5.1. Pamasangan Batré sareng Ngecas

The G60 laser level is powered by a rechargeable 4000mAh lithium battery. Ensure the battery is fully charged before first use.

• Pamasangan batré: Open the battery compartment cover on the device. Insert the 4000mAh Li-ion battery, ensuring correct polarity. Close the cover securely.
• Ngecas: The laser tool can be charged via direct plugging with the provided charger and Type-C cord, or the battery can be charged separately. It can also be powered by a power bank.

Figure 4: Multiple Charging Methods

5.2. Masang Level Laser

The G60 laser level can be mounted using various accessories:

• Lifting Base: Use the lifting base for precise height adjustments, especially for floor tiling. It allows the laser line to be as low as 2.5cm from the ground and extend up to 8cm.
• Dasar puteran: Provides 360° rotation for easy adjustment of horizontal lines.
• Bracket témbok: For mounting the laser level on a wall. The wall bracket offers fine-tuning capabilities: 9cm vertical adjustment, 5cm front/rear adjustment, and 2cm left/right adjustment. It features 1/4'' and 5/8'' mounting threads.
• Tripod: The 1/4'' mounting thread on the device allows it to be attached to standard tripods.

Figure 5: Lifting Base for Floor Tiling

Figure 6: Wall Bracket Fine-Tuning

6. Parentah Operasi

The G60 laser level offers three primary operating modes: Self-leveling, Manual, and Pulse.

6.1. Modeu Ngaratakeun Mandiri

• To activate, slide the ON/OFF switch to the 'ON' position.
• The instrument will automatically self-level within a ±4° range.
• If the device is outside its leveling range, the laser lines will flash quickly, indicating it cannot self-level. Adjust the device's position until the lines stabilize.

Figure 7: Ground-level Horizontal 360° Line (11mm from ground)

Figure 8: Self-Leveling Mode in Use

Figure 9: 4 x 360° Full Layout Coverage

6.2. Modeu Manual

• To enter Manual Mode, ensure the ON/OFF switch is in the 'OFF' position.
• Press and hold the middle button (usually marked with a lightbulb icon) for about 3 seconds. The left side indicator light will turn green.
• In Manual Mode, the laser line flashes slowly, and you can operate the tool at any angle you choose, without self-leveling.
• Single-press the middle button to adjust the brightness cyclically; three brightness levels are available.
• To turn off the measuring tool from Manual Mode, press and hold the middle button for 3 seconds.

Figure 10: Manual Mode in Use

6.3. Pulse Mode (with FD30 Receiver)

Pulse mode extends the working range of the laser level, especially useful in bright conditions or for longer distances, by allowing it to be detected by the FD30 receiver.

• Step 1: Enable Pulse Mode on G60: Single-press the middle button on the laser level to enter pulse mode. The right side indicator light will turn green.
• Step 2: Turn on FD30 Receiver: Power on the FD30 receiver.
• Step 3: Detect Laser Lines: Move the FD30 receiver to search for the laser lines. When the receiver detects the laser lines, it will emit
  
  
  

  FIRECORE G60 4D Héjo Laser Level Unboxing & Fitur Demonstrasi

  2:05 • 1280×2276 • unboxing

  Dokumén Patali - G60

  	FIRECORE G60 Green Beam Self-Leveling 4 x 360 Laser Level User Manual Manual pamaké pikeun FIRECORE G60 Green Beam Self-Leveling 4 x 360 Laser Level. Nyadiakeun inpormasi lengkep ngeunaan fitur produk, operasi, tungtunan kaamanan, spésifikasi, pangropéa, sareng garansi.
  	Manual Pamaké Firecore Green Laser Level - Operasi, Kasalametan, sareng Spésifikasi manual pamaké lengkep pikeun Firecore Héjo Laser Level. Ngawengku produk leuwihview, warnings kaamanan, modeu operasi, pituduh pangropéa, tips ngungkulan, spésifikasi teknis, sarta informasi jaminan pikeun pamaké profésional sarta DIY.
  	FIRECORE 3x360° Line Laser User Manual - Model F94T-XG User manual for the FIRECORE F94T-XG 3x360° Line Laser, covering safety instructions, product overview, modeu operasi, spésifikasi, pangropéa, ngungkulan, sarta informasi jaminan.
  	Firecore 3x360 ° Line Laser Pamaké Manual - F95T-XG Manual pamaké komprehensif pikeun Firecore F95T-XG 3x360 ° Line Laser. Ngawengku parentah kaamanan, produk leuwihview, modeu operasi, spésifikasi, pangropéa, ngungkulan, sarta informasi jaminan.
  	FIRECORE G50 Green Beam Self-Leveling 3x360 Laser Level User Manual Manual pamaké komprehensif pikeun FIRECORE G50 Green Beam Self-Leveling 3x360 Laser Level, ngawengku parentah kaamanan, produk leuwihview, modeu operasi, spésifikasi, pangropéa, ngungkulan, sarta informasi jaminan.
  	FIRECORE G30 Self-Leveling 360-Gelar Cross Line Laser Pamaké Manual Manual pamaké komprehensif pikeun FIRECORE G30 Self-Leveling 360-Degree Cross Line Laser, ngawengku spésifikasi, parentah kaamanan, operasi, pangropéa, jeung ngungkulan.