Sinotimer TM630S-4 12V Digital Programmable Timer Switch User Manual

Bubuka

The Sinotimer TM630S-4 is a high-precision, low-power consumption digital programmable timer switch designed for various applications. It offers 24-hour/7-day programmability with up to 16 ON/OFF settings, making it ideal for automating electrical appliances and saving energy. The built-in battery ensures that your programmed settings are retained even during power outages.

Hareupeun view of the Sinotimer TM630S-4 digital timer switch, showing the display and control buttons.

Fitur konci

High-Precision: Accurate timekeeping for reliable operation.
Bisa diprogram: 24 hours/7 days a week with up to 16 ON/OFF settings.
Ingetan memori: Built-in battery saves settings during power failure.
Manual Override: Option to manually set ON/OFF.
Konsumsi Daya Lemah: Desain hémat énergi.
Anti gangguan: Stable performance in various environments.
Aplikasi lega: Suitable for street lights, water heaters, air conditioning, billboards, aquariums, and more.

Diagram showing key features of the timer switch — Diagram illustrating the key features of the timer switch: high-precision, low-power consumption, anti-interference, and simple operation, along with its 7-day/24-hour programmability and built-in battery.

Disetél

Pamasangan

The TM630S-4 is designed for panel mounting. Ensure it is securely fastened in a suitable enclosure or panel.

The Sinotimer TM630S-4 timer switch mounted on a panel, illustrating its intended use in household applications.

Parentah Wiring

PERHATOSAN: All wiring should be performed by a qualified electrician and in accordance with local electrical codes. Ensure power is disconnected before wiring.

Connect the 12VDC/AC power supply to the 'IN' terminals (+ and -) as indicated on the device.
Connect the load (e.g., light, water heater) to the 'OUT' terminals (+ and -). The timer switch supports an output control of up to 30A.

Wiring diagram for Sinotimer TM630S-4 timer switch — Samping view of the Sinotimer TM630S-4 timer switch, highlighting the wiring diagram for power input and load output.

Parentah Operasi

Netepkeun Waktos Ayeuna

Press the 'Clock' button.
Use 'Week', 'H+' (Hour+), 'M+' (Minute+) buttons to set the current day, hour, and minute.
Release the 'Clock' button to save the time.

Programming ON/OFF Cycles

The timer supports up to 16 ON/OFF programs.

Press the 'Timer' button once to enter program setting mode. The display will show '1 ON'.
Use 'Week', 'H+', 'M+' buttons to set the desired ON time for the first program.
Press 'Timer' again. The display will show '1 OFF'.
Use 'Week', 'H+', 'M+' buttons to set the desired OFF time for the first program.
Repeat steps 1-4 for additional ON/OFF programs (up to 16).
After setting all desired programs, press the 'Clock' button to exit program setting mode and return to normal time display.

Manual Override

Press the 'MANUAL' button to cycle through different modes: ON, AUTO, OFF. In 'AUTO' mode, the timer follows the programmed settings. 'ON' keeps the load continuously on, and 'OFF' keeps it continuously off, overriding programs.

Ngareset Timer

To clear all settings and reset the timer to factory defaults, press the 'C/R' (Clear/Reset) button.

Pangropéa

The Sinotimer TM630S-4 is designed for minimal maintenance. The built-in battery ensures that your programmed settings are saved during power interruptions, eliminating the need for frequent reprogramming. Keep the device clean and free from dust. Do not expose to excessive moisture or extreme temperatures.

Pamérésan masalah

Timer teu hurung/pareum sakumaha anu diprogram:
- Check if the timer is in 'AUTO' mode (not 'ON' or 'OFF' manual override).
- Verify that the ON/OFF programs are set correctly, including the day of the week.
- Ensure the current time is set accurately.
Display is blank or not responding:
- Check the 12VDC/AC power supply connection.
- If recently powered on, allow a few minutes for the internal battery to charge and the display to activate.
- Try pressing the 'C/R' button to reset the device.
Load not receiving power:
- Confirm the load wiring is correct and secure.
- Ensure the timer is in an 'ON' state (either programmed or manual).
- Check the load itself (e.g., bulb, appliance) to ensure it is functional.

spésifikasi

Fitur	Spésifikasi
Nomer modél	TM630S-4
Tipe	Mini Time Controller
Gawé Voltage	12VDC / AC
Kontrol Kaluaran	30A (5000 Watt max)
Program	16 ON/OFF settings per day/week
Programmability	24 jam / 7 dinten saminggu
Time Error Correction	+/- 30 seconds, weekly
Memori Cadangan	Batré diwangun-di
Ukuran (approx.)	10 cm * 6 cm * 4 cm
Bahan	ABS + komponén éléktronik
Asalna	Daratan Cina

Tip pamaké

Optimalkeun Pamakéan Énergi: Utilize the 16 ON/OFF settings to precisely control when appliances operate, reducing unnecessary power consumption.
Temporary Changes: Use the 'MANUAL' button for temporary overrides without disturbing your programmed schedule. Remember to switch back to 'AUTO' for automatic operation.
Kakuatan Outage panyalindungan: The built-in battery is a great feature; ensure the timer has been powered for some time to allow the battery to charge fully, guaranteeing settings are saved during unexpected power cuts.
Biasa Review: Periodically check your programmed schedules to ensure they still meet your needs, especially after seasonal changes.

Collage of applications for the timer switch — A collage of various applications for the timer switch, including street lights, water heaters, air conditioning, billboards, garden lights, and aquariums, emphasizing its ability to save time and energy.

Garansi sareng Rojongan

For warranty information, technical support, or service inquiries, please contact your original seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.