1. Bubuka
Thank you for choosing the MAIMEIMI G13/Y03 GPS Head Up Display. This device is designed to enhance your driving safety and convenience by projecting essential vehicle information directly into your line of sight. Utilizing advanced GPS+Beidou dual-chip technology, it provides accurate speed, time, and directional data without delay. This manual will guide you through the setup, operation, and maintenance of your new HUD.
2. Émbaran Kasalametan
- Pastikeun alatna dipasang kalawan pageuh sareng henteu ngahalangan anjeun view jalan atawa ngaganggu kontrol kendaraan.
- Do not attempt to adjust the device settings while driving. Always pull over to a safe location before making any changes.
- Jauhkeun alat tina cai sareng suhu anu ekstrim.
- Use only the provided USB cable for power to prevent damage.
3. Eusi Paket
G13 Package:
- 1 x G13 HUD Unit
- 1 x Kabel USB
- 1 x Tikar Non-slip
- 1 x kurung
- 1 x Manual Pamaké
Y03 Package:
- 1 x Y03 HUD Unit
- 1 x Kabel USB
- 1 x Tikar Non-slip
- 1 x Manual Pamaké
4. Setup jeung Instalasi
4.1 Nempatkeun
The MAIMEIMI HUD is designed for non-destructive installation and can be placed on your dashboard or mounted on the A-pillar. Choose a location that does not block your line of sight and allows for clear visibility of the display.
- Penempatan Dashboard: Use the provided non-slip mat to secure the HUD on your dashboard.
- A-pillar/Windshield Mounting (G13 only): Attach the suction cup bracket to the device and then to a clean, smooth surface on your A-pillar or windshield. The bracket offers 360-degree rotation for optimal viewdina sudut.
4.2 Sambungan Daya
The HUD is a plug-and-play device. Connect the provided USB cable to the Micro USB interface on the back of the HUD and then to a USB port in your car or a cigarette lighter car charger port.
The device will automatically turn on when your car starts and turn off when the car shuts down, ensuring zero power consumption when not in use.
5. Parentah Operasi
5.1 Display Modes and Features
The HUD provides various display modes and features to keep you informed:
- Tampilan laju: Shows current vehicle speed in KM/H (G13 also supports MPH).
- Tampilan waktos: Némbongkeun waktu ayeuna.
- Driving Direction: Displays compass directions (N, S, E, W).
- Jumlah Satelit: Indicates the strength of the GPS signal.
- Ngalihkeun otomatis: When vehicle speed is 0, the time display is automatically switched. When speed is 1+, the speed display is automatically switched.
5.2 Unit Switching (G13)
The G13 model supports switching between MPH and KM/H. Refer to the physical manual for specific button operations to switch units.
5.3 Pangaturan Kacaangan Otomatis
Both G13 and Y03 models feature a built-in light sensor that automatically adjusts the display brightness according to the external environment. This ensures clear visibility during both day and night driving conditions.
5.4 Alarem Kasalametan
The HUD includes two important safety alarms:
- Alarm Overspeed: Can be set to alert you when your speed exceeds a predefined limit.
- Kacapean nyetir Panginget: Aktip saatos 8 jam nyetir terus-terusan pikeun ngingetkeun anjeun pikeun istirahat.
5.5 Color Switching
The display colors can be switched to various combinations including green, yellow-green, light blue, cyan, blue, red, and purple. Use the dial button (G13) or refer to the manual for Y03 to cycle through color options.
Video: Product demonstration showing various display modes, installation, and color switching.
6. Pangropéa
- Jaga alat tetep bersih ku cara ngusap nganggo lawon anu lemes sareng garing. Entong nganggo pembersih atanapi pangleyur anu abrasif.
- Ensure the light sensor is not obstructed for proper automatic brightness adjustment.
- Avoid exposing the device to direct sunlight for extended periods when not in use, especially in hot climates.
7. Cara ngungkulan
- Henteu aya tampilan/kakuatan: Check if the USB cable is securely connected to both the HUD and the car's power source. Ensure the car's ignition is on.
- Bacaan Laju Teu Tepat: The device relies on GPS signals. Ensure it has a clear view of the sky. Test the device outdoors, not inside a garage or parking structure, for accurate readings.
- Display Not Changing: For speed display, ensure your vehicle speed is above 1 KM/H. If stationary, it may switch to time display.
- Alarm Teu Fungsional: Check the device settings to ensure overspeed and fatigue driving alarms are enabled and configured correctly.
8. Spésifikasi
| Fitur | G13 Model | Y03 Model |
|---|---|---|
| Chip | GPS+Beidou Dual Chip (10Hz refresh rate) | |
| Ukuran layar | Not specified (Large font) | 2.8 inci |
| Bahan | Henteu ditangtoskeun | ABS + PC |
| Tipe Layar | HD LED | LED |
| Unit laju | KM/H, MPH | KM/H (MPH not supported) |
| Modél lumaku | Universal for all cars, trucks, buses, motorcycles, e-scooters, e-bikes | |
| Warna | Not specified (Black unit) | Hideung jeung Héjo |
| Fitur husus | Overspeed Alarm, Fatigue Driving Reminder, Auto Brightness, Multiple Colors, 360° Rotating Suction Cup Bracket | Overspeed Alarm, Fatigue Driving Reminder, Auto Brightness, Sunshine Hood |
9. Tips pamaké
- For optimal visibility, ensure the device is placed where it has a clear line of sight to the road ahead.
- Candak advantage of the automatic brightness feature; avoid manually adjusting brightness unless necessary.
- Always test the device in an open area with a good GPS signal to confirm accurate speed readings before relying on it for navigation.
10. Garansi jeung Rojongan
For warranty information and technical support, please refer to the seller's policies or contact the MAIMEIMI customer service directly. Keep your purchase receipt as proof of purchase.