P10 Pro OBD2 Car Head-up Display

1. Bubuka

Hatur nuhun pikeun meuliasing the MAIMEIMI P10 Pro OBD smart digital device. This product connects to your car's OBD2 interface via an OBD cable and displays essential driving data such as vehicle speed, engine RPM, water temperature, and fuel consumption. It is designed to help drivers keep their eyes on the road, reducing the need to look down at the dashboard. This device will not alter any car ECU data.

The P10 Pro is equipped with powerful error code detection capabilities. It can display error code information clearly in text form, clear fault information, and offers accelerating competitive mode, brake performance test mode, and the ability to read the entire vehicle data stream, among other functions.

2. Fitur

• Available for cars with OBD2 and EUOBD ports (Car automatic diagnosis system), offering plug-and-play functionality.
• TFT LCD multi-color smart display for clear visibility.
• The first scan upon connection will show the vehicle protocol.
• Language settings can be changed.
• Multi-function display mode or simple function display mode can be switched freely.
• New functions include accelerating competitive mode and brake performance test.
• Reads entire car data stream information.
• Rich content display: vehicle speed, engine RPM, water temperature, voltage, instantaneous fuel consumption, average fuel consumption, driving distance measurement, driving time, low voltage alarm, high water temperature alarm, over-speed alarm, engine fault code alarm, and fault code elimination.
• Freely switch between kilometers and miles.

3. Eusi Paket

pakét ngawengku item handap:

• 1 x P10 Pro Head-up Display Unit
• 1 x Kabel OBD
• 1 x Anti-slip Mat
• 1 x Manual Pamaké

4. Setup jeung Instalasi

4.1. Cék kasaluyuan

The P10 Pro is a dual-system head-up display suitable only for gasoline vehicles. It is generally compatible with gasoline vehicles equipped with an OBD2 agreement:

• Amérika Sarikat: Cars produced after 2004.
• Wewengkon séjén: Cars produced after 2008.

To confirm compatibility, check for an "OBDII CERTIFIED" sticker under the engine hood (as shown in Figure 2) or locate an automobile diagnosis port under the steering wheel (as shown in Figure 3). If your car is a U.S. model, it can typically be used if produced after 2003; most other cars after 2007. If unsure, please contact customer service before purchasing.

4.2. Nyambungkeun Alat

1. Locate the 16-pin OBD2 diagnostic link in your vehicle.
2. Connect the provided OBD cable to the diagnostic link and then to the P10 Pro device.
3. Place the P10 Pro unit on your dashboard using the anti-slip mat, ensuring it does not obstruct your view atawa ngaganggu nyetir.

4.3. Initial Power-On and Language Selection

Once connected, the device will power on automatically when the car engine starts. You may be prompted to select a language:

1. The device will display "Connecting..." and then a language selection screen.
2. Use the setting button (push left/right) to navigate through language options (e.g., English, Simplified Chinese, Traditional Chinese, Russian).
3. Short press the setting button to confirm your selection.

5. Parentah Operasi

5.1. Kontrol jeung Napigasi

The P10 Pro is operated using a single setting button:

• Pencét pondok: Switches the display mode or confirms a menu selection.
• Nyorong Kénca: Switches left area functions or decreases a setting value.
• Pencét Katuhu: Switches right area functions or increases a setting value.
• Pencét lila (5 detik): Enters the setting menu. After making changes, long press again to save and exit.

5.2. Modeu tampilan

The device offers multiple display interfaces. Short press the setting button to cycle through different modes, showing various combinations of speed, RPM, fuel, temperature, and other data.

5.3. Accessing and Adjusting Settings

To access the settings menu, long press the setting button. Use push left/right to navigate and short press to confirm. Long press again to save and exit.

Key Settings Explained:

• Set Basa: Choose your preferred language (e.g., English, Simplified Chinese, Traditional Chinese, Russian).
• Saklar Sora: Turn the buzzer on/off (default is on).
• Alarm laju: Default value is 150. When speed exceeds this value, the HUD will alarm. Adjust using push left/right.
• Alarm coolant: Default value is 120°C. The device will alarm if coolant temperature exceeds this.
• Alarem RPM: Default value is 6000 RPM. The device will alarm if RPM exceeds this.
• Alarm Bat: Default value is 10.5V. The device will alarm if battery voltage drops below this.
• Saluyukeun laju: Adjust the speed reading to match your car's dashboard (default 107%).
• Speed ​​Offset: If the device shows speed (e.g., 5 KM/H) when the vehicle is off, adjust this value to 5.
• BAT Saluyukeun: Adjust if the battery voltage displayed differs from the vehicle's actual voltage.
• Ukuran Mesin: Default 1.6 L. Adjust if fuel consumption differs significantly from the dashboard.
• Saluyukeun bahan bakar: Default 100%. Can be adjusted.
• Change Color 1/2/3: Adjust the color of different display areas (top, left, right). Note: Color changes only apply to the first interface.
• Caang: Default is 0 (automatic). Values 1-6 allow manual adjustment (higher number = stronger brightness).
• Unit CWT: Default coolant temperature unit is °C, can be changed to °F.
• Unit laju: Default is KM/H, can be changed to MPH.
• Jumlah Jarak: Allows setting the total driving distance to match the dashboard (e.g., if dashboard shows 30000Km, set device value to 30000KM).
• Pareuman waktos: Default 10s. For cars with auto start/stop, set to 180-240s.
• Saré voltage: If the device doesn't auto-off, adjust this to 13.2V or higher.
• Set pabrik: Short press to reset to factory defaults.

5.4. OBD Diagnosis and Driving Tests

• Scan DTCs: Scans the ECU for error codes and displays details.
• DTC bersih: Clears detected fault codes.
• Speedup Test: Displays speed, distance, and time for 400m and 100m acceleration.
• Uji rem: Displays speed, brake distance, and time for braking performance.
• Aliran Data: Shows all available vehicle data streams.

6. Pangropéa

To ensure the longevity and optimal performance of your P10 Pro Head-up Display, follow these simple maintenance guidelines:

• beberesih: Use a soft, dry cloth to clean the display screen and the device body. Avoid using abrasive cleaners or solvents, which can damage the surface.
• Panyimpenan: Lamun teu dipaké pikeun période nambahan, nyimpen alat dina tiis, tempat garing jauh ti sinar panonpoé langsung jeung hawa ekstrim.
• Penanganan: Handle the device with care to prevent drops or impacts that could cause internal damage.

7. Cara ngungkulan

7.1. Isu umum jeung Solusi

1. The screen has no display and no power.
   • Mimitian mesin mobil.
   • Check if the OBD cable is tightly connected. Try pulling down and re-inserting the OBD cable multiple times.
   • Ensure the product power switch is turned on.
   • If still no display, test the device in another compatible car to determine if the car's OBD diagnostic interface is faulty. If the car's interface is faulty, repair it.
2. Only shows car voltage and automatically powers off after 60 seconds.
   • This product is only available for cars with OBD2 and EU-OBD agreements (European region: after 2003; other regions: after 2007).
   • It does not support JOBD and OBDI. Test with another compatible car.
3. Inaccurate Speed.
   • First, check if the speed unit (KM/H or MPH) is correct in the settings and switch if necessary.
   • If the dashboard speed differs from the device speed (e.g., dashboard shows 100, device shows 101), enter the settings menu (long press), navigate to 'Speed Adjust', and adjust the value (default 107%) to match your dashboard.
4. Inaccurate Fuel Consumption.
   • Check your car's engine displacement and set the device's 'Engine Size' to match (e.g., if your car is 2.0L, set the device value to 2.0L).
   • The 'Fuel Adjust' setting can also be adjusted (default 100%). However, it is generally not recommended to change it as all data is read directly from the car's ECU.
5. RPM Alarm.
   • The default RPM alarm is 6000. Adjust this value in the settings if needed.
6. Over Speed Alarm.
   • The default over speed alarm is 150 KM/H. Adjust this value in the settings if needed.
7. The device cannot auto power off.
   • If the device still displays speed after the vehicle turns off, adjust the 'Speed Offset' value to match the device's displayed speed (e.g., if it shows 5 KM/H, set offset to 5).
   • If the device still displays RPM after the vehicle turns off, switch to 'Sleep voltage' in settings and set the value to 13.2V or higher.
8. Auto start and stop cars.
   • For cars with auto start/stop functionality, change the 'Power off time' setting to 180-240 seconds.
9. Wrong operation leads to crashes.
   • Perform a factory reset in the settings menu.
10. Why does the car dashboard fault code light up?
    • Universal OBD devices support multiple communication modes, but each car typically uses only one protocol. If the device pulls up unneeded pins, it can trigger a fault code. When the vehicle turns on, unplug the OBD cable and re-plug it. The device will then display the correct protocol.

7.2. OBD Communication Protocols

The P10 Pro supports various OBD communication protocols. If you encounter issues, ensure the correct pins are maintained for your vehicle's protocol:

• ISO15765 CAN Bus: Keep pins 4/5/6/14/16. Pull up other pins.
• ISO14230 KWP2000: Keep pins 4/5/7/16. Pull up other pins.
• ISO 9141-2: Keep pins 4/5/7/15/16. Pull up other pins.

8. Spésifikasi

9. Tips pamaké

• Pariksa kasaluyuan: Always verify your vehicle's OBD2 compatibility before purchase, especially for models older than 2008 (or 2004 for US cars). If in doubt, consult the seller or your car's manual.
• Penempatan optimal: Position the HUD where it is clearly visible but does not obstruct your view of the road or dashboard instruments.
• Manajemén Kabel: Secure the OBD cable to prevent it from interfering with pedals or other driving controls.
• Kustomisasi: Explore the various display modes and color options to find the setup that best suits your driving preferences and visibility needs.

10. Garansi jeung Rojongan

For warranty information, technical support, or further assistance, please refer to the official product page or contact the seller directly. Keep your purchase receipt for any warranty claims.

Manual pamaké lengkep dina format PDF ogé sadia pikeun diundeur: Manual Pamaké (PDF)