Bubuka
Thank you for choosing the DATA FROG JC09 Controller. This manual provides detailed instructions on how to set up, operate, and maintain your new controller. Designed for versatility, the JC09 offers an enhanced gaming experience across multiple platforms with features like RGB lighting, 6-axis gyro, and vibration feedback.
Fitur konci
Fungsi Langkungview: 5.0 BT Wireless, Wake-up, Screenshot, Vibration, 400mAh Battery, 6-Axis Gyro.
- 5.0 BT Wireless: Stable and reliable Bluetooth connectivity.
- Fungsi Wake-up: Quickly resume gameplay.
- Tombol Potret Layar: Capture your in-game moments instantly.
- Eupan Balik Geter: Immersive haptic feedback for a realistic experience.
- Batré 400 mAh: Provides approximately 6-8 hours of continuous gameplay.
- Giro 6-Sumbu: Precise motion control for supported games.
Setup sareng Sambungan
Attaching to Nintendo Switch Console
Follow these steps to attach the controllers to your Nintendo Switch console:
- Press and Hold Lock Button: Locate and press the lock button on the back of the controller.
- Slide onto Console: While holding the button, align the controller with the rail on the side of the Nintendo Switch console and slide it downwards until it clicks into place.
Installation and Removal Method for Joypad Controllers.
Detaching from Nintendo Switch Console
To detach the controllers:
- Press and Hold Lock Button: Locate and press the lock button on the back of the controller.
- Slide Off Console: While holding the button, slide the controller upwards along the rail until it detaches from the console.
Wireless Pairing (One-Click Link)
To connect the controllers wirelessly to your Nintendo Switch or other compatible devices:
- Lebetkeun Modeu Pilarian: Long press the Home button (usually indicated by a house icon) on the controller for 3 seconds. The controller will enter search mode, indicated by flashing lights.
- Pasangkeun sareng Alat: On your device (e.g., Nintendo Switch, PC, Android), navigate to the Bluetooth settings and select the JC09 controller from the list of available devices to pair.
Long press for 3 seconds to enter search mode for wireless pairing.
Operasi
Light-Emitting Modes
The controller features multiple RGB light modes for a personalized gaming experience:
Instructions for adjusting light effects.
To adjust the light effects:
- Enter/Exit Mode: While the controller is turned on, double-click the
-or+button to enter or exit the light adjustment mode. - Pilih Mode Cahaya: Pull the joystick up and down to cycle through the following modes:
- Modeu lampu engapan
- Modeu lampu konstan
- Modeu ngarobah warna
- Modeu gradién warni
- Pilih Warna: Pull the joystick left and right to select a specific color within the chosen mode.
Visual examples of the different lighting modes.
Modeu Kaulinan
The JC09 controller supports various gaming configurations:
- Modeu Kantong: Attach the controllers to your Nintendo Switch console for a portable, single-player experience.
- Mode nirkabel: Detach the controllers and use them wirelessly for multiplayer gaming or when the console is docked.
Pocket Mode for single-player gaming.
Wireless Mode for multiplayer gaming.
Pangropéa
Ngecas
The JC09 controller features a built-in 400mAh battery and Type-C charging ports.
Type-C Charging Ports: Built-in battery lasts 6-8 hours, and you can play while charging.
- Métode ngecas: Connect the controller to a power source using a standard Type-C USB cable.
- Indikator ngecas: The controller's lights will indicate charging status (specific behavior may vary, refer to visual cues on the controller).
- Maén Sambil Ngecas: You can continue to use the controller while it is charging.
beberesih
To clean your controller, use a soft, dry cloth. Do not use harsh chemicals or abrasive materials, as these may damage the surface.
Pamérésan masalah
- Controller Teu Nyambung: Ensure the controller is charged. Long press the Home button for 3 seconds to enter pairing mode. Check your device's Bluetooth settings to ensure it's discoverable and try re-pairing.
- Input Lag atanapi Pemutusan: Ensure there are no obstructions between the controller and the device. Move closer to the device. Avoid strong electromagnetic interference.
- Tombol Teu Ngabales: Try resetting the controller (if a reset button is available, typically a small pinhole on the back). Ensure the controller is fully charged.
- Éfék Lampu Teu Jalan: Double-check that you are correctly entering the light adjustment mode by double-clicking the
-or+kancing.
spésifikasi
| Fitur | Rincian |
|---|---|
| Ngaran Brand | DATA bangkong |
| Nomer modél | JC09 |
| Tipe | Pad kaulinan |
| Tipe panganteur | Bluetooth |
| Brand cocog / Modél | Nintendo |
| Cocog Nintendo Modél | Nintendo Pindah, Nintendo Pindah OLED, Nintendo Pindah Lite |
| Platform cocog | Nintendo Switch, PC, Android, Steam, Raspberry Pi |
| Balé Pangaruh | No |
| Joystick Sensor Module Brand / Jenis | POLYSHINE |
| Jenis Tombol pemicu | Non-Linear |
| Bungkusan | Sumuhun |
| Asalna | Daratan Cina |
Tip pamaké
- Pikeun kinerja anu optimal, pastikeun controller anjeun dicas pinuh sateuacan sési kaulinan anu panjang.
- Experiment with the different RGB lighting modes to find your preferred aesthetic.
- When playing wirelessly, keep the controller within a reasonable range of your device to maintain a stable connection.
Garansi sareng Rojongan
For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. If you encounter any issues or require technical assistance, please contact the seller or manufacturer's customer support.
