1. Bubuka
Thank you for choosing the Universal Wireless Sensor Car Door Light. This innovative product is designed to enhance the safety and aesthetics of your vehicle. Featuring intelligent sensing technology, these lights automatically illuminate when your car door opens, providing a welcoming glow and acting as a warning signal to other drivers. With a wiring-free design and convenient USB charging, installation and maintenance are straightforward.
2. Fitur konci
- Intelligent Sensing: Lights automatically turn on when the car door opens and turn off when closed, conserving power and increasinkaamanan g.
- Énergi Éfisién: Equipped with a 500mAh rechargeable battery, providing approximately 69 days of use on a single charge.
- Nirkabel & Pamasangan Gampang: No drilling or wiring required. Installs securely with double-sided adhesive.
- Ngecas merenah: The light unit can be easily removed from its base for hassle-free USB charging.
- Kaamanan ditingkatkeun: Acts as a warning reminder for vehicles behind you, reducing the risk of accidents.
- Stylish Illumination: Provides ambient lighting, available in white or colorful LED options, to upgrade your car's appearance.
3. Spésifikasi
| Ngaran produk | Door Open Warning Lamp |
| Modél lumaku | General Automobile |
| Beurat produk | 16.7g |
| Dimensi produk | 72 x 25 x 11 mm (2.83 x 0.98 x 0.43 inci) |
| Bahan Produk | LED lamp beads / PVC material |
| Mode produk | Infrared sensor, light gradient |
| Kapasitas batré | 500 mah |
| Tipe Ngecas | USB |
| Asalna | Daratan Cina |
4. Eusi Paket
Saatos muka bungkusan, pastikeun sadaya barang ieu aya:
- Car Door Light Unit (x1)
- Ngecas Kabel (x1)
- Double-sided Adhesive (for installation)
- Infrared Induction Paper Sticker (for sensor alignment)
5. Pitunjuk Instalasi
The Car Door Light features a simple, wireless installation process.
- Nyiapkeun permukaan: Choose a flat, clean area on the inside of your car door where the light will be installed. Ensure the surface is free of dust, grease, and moisture.
- Pasang Dasar: Peel off the protective film from one side of the double-sided adhesive. Apply it firmly to the back of the light's base.
- Pasang pangkalan: Peel off the remaining protective film from the adhesive on the base. Carefully position the base on the chosen area of your car door and press firmly for several seconds to ensure a secure bond.
Figure 2: Applying double-sided adhesive to the light's base. - Sejajarkeun Sensor: Identify the infrared sensing area on the light unit (refer to Figure 1). When the car door is closed, the infrared induction paper sticker must coincide with this sensing area to ensure proper automatic on/off functionality. Attach the infrared induction paper sticker to the car frame, opposite the sensor, so it aligns when the door is closed.
Figure 3: Proper alignment of the infrared sensing paper with the sensor. - Pasangkeun Unit Lampu: Once the base is securely mounted and the sensor aligned, simply attach the light unit to the installed base. It should click into place or be held by magnets.
Figure 4: Car door light installed and illuminating the ground when the door is open.
Kanggo pituduh visual, mangga tingali pidéo pamasangan di handap ieu:
6. Operasi
- Aktip otomatis: The light is equipped with an infrared sensor. When the car door is opened, the sensor detects the absence of the induction paper, and the light will automatically turn on.
- Nonaktipkeun otomatis: When the car door is closed, the sensor detects the presence of the induction paper, and the light will automatically turn off.
- Saklar utama: A main switch is located on the light unit (refer to Figure 1) to manually turn the light on or off, or to change between white and colorful light modes if your model supports it.
7. Parentah Ngecas
To charge your Car Door Light:
- Gently detach the light unit from its installed base.
- Locate the USB charging port on the side of the light unit (refer to Figure 1).
- Connect the provided USB Android charging cable to the light unit and to a suitable USB power source (e.g., car charger, power bank, computer USB port).
- The light will indicate charging status (e.g., a red indicator light). Once fully charged, the indicator light may change or turn off.
- After charging, reattach the light unit to its base, ensuring it is securely fastened.
A full charge provides approximately 69 days of normal use.
8. Pangropéa
- beberesih: Wipe the light unit and its base with a soft, dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
- Perawatan batré: For optimal battery life, avoid completely draining the battery frequently. Charge the unit when the light output appears dim.
- Umur Perekat: If the adhesive bond weakens over time, clean the surface thoroughly and reapply new double-sided adhesive for secure mounting.
9. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Light does not turn on when door opens. | Batré lemah atawa béak. Main switch is off. Infrared sensor is obstructed or misaligned. | Charge the light unit. Ensure the main switch is in the 'on' position. Check alignment of the infrared induction paper with the sensor. |
| Light does not turn off when door closes. | Infrared sensor is misaligned or induction paper is missing. Panto henteu ditutup pinuh. | Re-align the infrared induction paper with the sensor. Ensure the car door is completely closed. |
| Light unit falls off the door. | Adhesive has lost its stickiness. Surface was not clean during installation. | Clean the surface thoroughly and reapply new double-sided adhesive. Pastikeun beungeut beresih jeung garing saméméh nerapkeun napel. |
10. Tips pamaké
- For optimal sensor performance, ensure the infrared induction paper sticker is precisely aligned with the sensor on the light unit when the door is closed.
- While designed for automotive use, it is advisable to avoid direct and prolonged exposure to heavy rain or water to maximize product lifespan, as explicit waterproofing ratings are not provided.
- Consider installing lights on all four doors for comprehensive safety and a consistent aesthetic.
11. Garansi jeung Rojongan
For any questions, concerns, or technical support regarding your Car Door Lights, please contact the seller or retailer from whom you purchased the product. Please retain your proof of purchase for any warranty claims.
