1. Bubuka
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Daikin Air Conditioning Wire Control Panel. Please read this manual thoroughly before using the product to ensure safe and correct operation.
2. Setup and Installation Precautions
Before commencing operation or installation, observe the following critical precautions:
- Ensure that both the gas side and liquid side shut-off valves of the outdoor unit are fully open.
- Keep the crankcase heater energized for more than 12 hours prior to initial startup.
3. Parentah Operasi
The Daikin Wire Control Panel provides intuitive control over your air conditioning unit. Refer to the diagram below for button layout and display information.
3.1. Main Display Elements
- Suhu Témbong: Shows the current set temperature (e.g., 25°C).
- Tampilan waktos: Shows the current time (e.g., 9:50).
- Indikator Mode Operasi: Displays the active mode (e.g., 'H' for Heat, or other symbols for Cool, Fan, Dry, Auto).
- Indikator Laju Kipas: Némbongkeun laju kipas nu dipilih.
- Indikator Timer: Indicates if a timer function is active.
3.2. Fungsi Tombol
The control panel features several buttons for various functions. Some buttons are located behind a protective flap at the bottom of the unit.
- Tombol Daya (⏻): Ngahurungkeun atanapi mareuman unit AC.
- Tombol Pilihan Mode: Allows selection between different operating modes (Cool, Heat, Fan, Dry, Auto).
- Tombol Pangaturan Suhu (▲ / ▼): Saluyukeun suhu set kaluhur atanapi kahandap.
- Fan Speed Adjustment Buttons: Ngadalikeun kagancangan kipas.
- Tombol Timer: Used to set or cancel timed operations.
- Tombol TEST: Used for inspection or diagnostic purposes.
3.3. Important Operating Notes
- If a button is pressed and the indoor unit does not support that specific function, the display will show "NOT AVAILABLE".
- In certain display states, the "Operation/Stop" function (power button) may not be operable.
4. Pangropéa
To ensure optimal performance and longevity of your Daikin Wire Control Panel and the connected air conditioning unit, regular maintenance is recommended.
- beberesih: Gently wipe the control panel surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this may damage the display or buttons.
- Indikator Kasalahan: If the operation light or fault indicator light on the panel flashes, it signifies a potential issue. Refer to the troubleshooting section and consult the indoor unit's maintenance precautions for further guidance.
5. Cara ngungkulan
This section provides solutions to common issues you might encounter with your control panel.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Display shows "NOT AVAILABLE" | The selected function is not supported by the connected indoor air conditioning unit. | This is normal behavior. The control panel is universal and may have functions not present in all connected units. Use only functions supported by your specific indoor unit. |
| Operation/Stop button is unresponsive | The unit may be in a specific display state where this function is temporarily disabled. | Wait a few moments or try cycling through other modes if possible. If the issue persists, consult a qualified technician. |
| Operation light or fault indicator flashes | Indicates a fault or error within the air conditioning system. | Note the flashing pattern or any displayed fault codes. This signal notifies maintenance personnel. Refer to the indoor unit's "Maintenance Precautions" for specific fault code interpretations and contact a qualified technician for inspection and repair. |
6. Spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | BRC1D52, BRC1C61, BRC1C611 |
| Nomer Bagian (Contonaample) | 4P054322-1B, EC0025(C) |
| Aplikasi | Air Conditioning Wire Control Panel (Window type or similar applications) |
| Asalna | Daratan Cina |
| Kimia anu prihatin tinggi | Euweuh |
| Pakét Panjang | 18 cm |
| Bungkusan Lebar | 18 cm |
| pakét Jangkungna | 6 cm |
| Beurat pakét | 0.6 kg |
7. Tips pamaké
- If you encounter the "NOT AVAILABLE" message, it simply means your specific air conditioning unit does not support that particular function. This is normal and not an error with the control panel itself.
- For optimal performance, ensure the outdoor unit's shut-off valves are fully open and the crankcase heater has been energized for at least 12 hours before initial use.
8. Garansi jeung Rojongan
For specific warranty details, please refer to the documentation provided with your air conditioning unit or contact your Daikin dealer or the point of purchase. Technical support and service inquiries should also be directed to authorized Daikin service centers or your installer.
