1. Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of your new Universal Car HUD GPS Speedometer. This device is designed to display essential driving information directly in your line of sight, enhancing safety and convenience. It utilizes GPS satellite data for accurate speed readings and features a clear, non-reflective display suitable for all vehicles.
Gambar 1: Hareupeun view of the HUD GPS Speedometer displaying speed and compass.
2. Setup jeung Instalasi
The HUD GPS Speedometer is designed for effortless plug-and-play installation. No complex wiring or connections to your vehicle's engine or OBD port are required.
2.1 Eusi pakét
- 1 x HUD GPS Speedometer (Model G1)
- 1 x USB Power Cord
2.2 Léngkah-léngkah Instalasi
- panempatan: Choose a suitable flat surface on your dashboard where the device will not obstruct your view of the road or interfere with driving controls. Ensure the device is stable.
- Sambungan Daya: Connect the provided USB power cord to the HUD GPS Speedometer. Plug the other end of the USB cable into an available USB port in your car. If your car does not have a USB port, use a compatible car USB adapter (not included) plugged into your car's cigarette lighter socket.
- Akuisisi Sinyal GPS Awal: Upon first use, allow approximately 10-30 seconds for the device to acquire a GPS signal. During this time, ensure the vehicle is outdoors with a clear view of the sky. The device cannot be used indoors as it relies on GPS signals.
Gambar 2: Kelample placement of the HUD GPS Speedometer on a car dashboard.
3. Operasi
3.1 Automatic Power Management
The HUD GPS Speedometer features a built-in vibration sensor for automatic power management:
- When your car is in motion, the device will automatically switch on and display speed in large, clear fonts.
- After 3 minutes of no movement (e.g., when the car is parked and turned off), the device will automatically power off to conserve energy.
3.2 Fitur tampilan
Pintonan nyayogikeun inpormasi ieu:
- Kagancangan Waktos Nyata: Displays your current driving speed.
- Kompas: Shows your current cardinal direction (N, S, E, W).
- Alarm Langkung Laju: Alerts you if you exceed a preset speed limit (feature details not specified, typically user-configurable or fixed).
- Kacapean nyetir Panginget: Provides reminders for long driving durations (feature details not specified).
- Penyesuaian Kacaangan Otomatis: The display brightness adjusts automatically to ambient light conditions for optimal visibility day or night.
Figure 3: The HUD GPS Speedometer display showing various colors and information modes (speed, time).
4. Pangropéa
To ensure the longevity and optimal performance of your HUD GPS Speedometer, follow these simple maintenance guidelines:
- beberesih: Use a soft, dry cloth to clean the device's exterior. For stubborn smudges, slightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the display or casing.
- Panyimpenan: When not in use for extended periods, disconnect the device from power and store it in a cool, dry place away from direct sunlight and extreme temperatures.
- Ngahindarkeun Dampak: Protect the device from drops and impacts, which can damage internal components or the display.
5. Cara ngungkulan
If you encounter issues with your HUD GPS Speedometer, refer to the following common problems and solutions:
5.1 Alat Teu Diaktipkeun
- Ensure the USB power cord is securely connected to both the device and a working USB power source in your vehicle.
- Verify that the vehicle's USB port or car adapter is receiving power.
5.2 No Speed Display / GPS Signal Not Acquired
- Ensure the vehicle is outdoors with a clear view of the sky. The device cannot acquire GPS signals indoors or in areas with heavy overhead obstruction (e.g., tunnels, dense urban canyons).
- Allow 10-30 seconds for initial GPS signal acquisition, especially after the first power-on or if the device has been moved a significant distance.
- If the issue persists, try moving the device to a different location on the dashboard to improve satellite reception.
5.3 Inaccurate Speed Reading
- Ensure the device has a stable GPS signal. Weak signals can lead to inaccuracies.
- Compare the HUD reading with your vehicle's speedometer. Minor discrepancies may occur due to different measurement methods.
5.4 Display is Dim or Too Bright
- The device features automatic brightness adjustment. Ensure the light sensor (if visible) is not obstructed.
6. Spésifikasi
Figure 4: Product specifications overview.
| Fitur | Rincian |
|---|---|
| Modél | G1 |
| Bahan | ABS + PC |
| Tipe | GPS Speedometer (Heads-Up Display) |
| Masukan Voltage | 5V |
| Input Ayeuna | 50-150mA |
| Suhu Gawé | -30°C nepi ka 80°C (-22°F nepi ka 176°F) |
| Diménsi Alat (P x L x T) | 80mm x 31mm x 54mm |
| Beurat alat | 35g |
| Ukuran Paket (L x W x H) | Ukuran 11 x 7 x 6 cm |
| Beurat pakét | 0.117 kg |
| Warna | Hideung |
| Kasaluyuan | Universal for all vehicles (SUV, ATV, Truck, Scooter, Golf Cart, Bus, Boat, Train, Bike, etc.) |
7. Tips pamaké
- Tampilan waktos: The device automatically sets the time via GPS signals. There is no manual setting for the time.
- Pamakéan munggaran: Be patient during the initial GPS signal acquisition. It may take up to 30 seconds to lock onto satellites and begin displaying information.
- Penempatan optimal: For best GPS reception and visibility, place the device on the dashboard with a clear view ti langit.
8. Garansi jeung Rojongan
Pikeun patalékan, dukungan téknis, atanapi patarosan garansi, mangga ngahubungi penjual atanapi produsén langsung. Simpen resi pameseran anjeun salaku bukti pameseran.
