Makerbase CNC TS35-R / TS24-R Touch Screen Display User Manual

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of the Makerbase MKS TS35-R and TS24-R touch screen displays. These displays are designed to work exclusively with the MKS DLC32 V2.1 controller board, offering an intuitive interface for CNC laser engravers and similar applications.

Figure 1: MKS TS24-R and TS35-R displays showing main control, setting, and engraving interfaces. The TS24-R displays 'Control', 'Setting', and 'Engraving' options. The TS35-R shows 'S Status: IDLE', 'Z Status: IDLE', 'X Y POS', 'Power', 'Speed', 'WiFi: Disconnect', and 'Sculpture', 'Tool', 'Control', 'Adjustment' buttons.

2. Kasaluyuan

Important: The MKS TS35-R and TS24-R displays are ONLY compatible with the MKS DLC32 V2.1 control board.

Ensure your controller board is the specified model for proper functionality and to avoid potential damage.

3. Setup jeung Instalasi

The display connects to the MKS DLC32 V2.1 controller board via the provided 10-pin ribbon cable. Follow these steps for installation:

Ensure the MKS DLC32 V2.1 controller board is powered off before connecting the display.
Carefully align the 10-pin ribbon cable with the corresponding connector on both the display and the controller board. Ensure the orientation is correct to prevent damage.
Gently push the cable into the connectors until it is securely seated.
Once connected, you may power on the MKS DLC32 V2.1 board. The display should initialize and show the main interface.

MKS TS35-R V2.0 display connected to a controller board with a ribbon cable, showing working and mechanical coordinates. — Figure 2: MKS TS35-R V2.0 display connected to a controller board with a ribbon cable. The screen displays 'WiFi: Disconnect', 'Working coordinates' (X:0.0, Y:0.0, Z:0.0), 'Mechanical coordinates' (X:0.0, Y:0.0, Z:0.0), and buttons for 'Control', 'Sculpture', and 'Tool'.

4. Firmware

To ensure optimal performance and access to the latest features, it is recommended to use the correct and up-to-date firmware for your display and controller board. Firmware files and instructions can be found on the official Makerbase GitHub repository:

Firmware for MKS TS24-R: https://github.com/Macrobase-tech/MKS-DLC32/tree/main/MKS%20DLC32%2BTS24
Firmware for MKS TS35-R: https://github.com/Macrobase-tech/MKS-DLC32/tree/main/MKS%20DLC32%2BTS35

Please refer to the instructions provided on the GitHub page for detailed steps on how to flash the firmware.

5. Operasi

The MKS TS35-R and TS24-R displays offer an intuitive touch interface for controlling your CNC machine. The main interface typically provides access to Control, Setting, and Engraving/Sculpture functions.

5.1 Napigasi Interface utama

Upon startup, you will see the main screen with options such as:

Kontrol: For manual movement of axes (X, Y, Z), setting home positions, and controlling spindle/knife.
Setélan: To configure display parameters, language, WiFi, and view board information.
Engraving/Sculpture: To select and start engraving jobs from files disimpen dina alat.
Alat: Access to various tools and utilities.

Video 1: Demonstration of the MKS TS35-R display's user interface, showing navigation through control, settings, and file selection menus, as well as axis movement and spindle control.

5.2 Control Functions (Example: MKS TS24-R)

Within the 'Control' menu, you can typically perform the following actions:

Gerakan Axis: Use arrow buttons (X+, X-, Y+, Y-, Z+, Z-) to move the machine's axes.
Posisi imah: Set or return to the home position (H-Home).
Z-Clear: Clear the Z-axis position.
Kontrol Spindle: Turn the spindle ON/OFF.
Knife Control: Activate/deactivate the knife function.
Pangaluyuan Kacepetan: Select movement speeds (e.g., Low Speed, Mid Speed, High Speed).

Figure 3: MKS TS24-R V2.0 display showing Z-axis control, movement, spindle, and knife functions.

5.3 Engraving/Sculpture Functions

To start an engraving job:

Navigate to the 'Engraving' or 'Sculpture' menu.
Select the desired G-code file (e.g., Snoopy.nc, cube.gcode) from the list.
The display will show the progress of the job, including F (Feedrate), S (Spindle Speed), and R (Laser Power) percentages.
You can typically 'Hold' or 'Stop' the job, and access 'Adjustment' settings during operation.

Figure 4: MKS TS35-R V2.0 display showing engraving progress and file manajemén.

5.4 Mobile App Control

The MKS DLC32 V2.1 controller board and compatible displays support mobile app control. Milarian pikeun "MKSLASER" on Google Play Store or Apple App Store to install the application on your phone.

Aplikasi mobile ngamungkinkeun anjeun pikeun:

Adjust parameters like feedrate, speed, and laser power.
Monitor carving progress.
Edit and slice photos for engraving.
Ngirimkeun files directly to the motherboard.

Mobile app interface for MKS Laser, showing parameter settings and carving progress. — Figure 5: Screenshot of the MKS Laser mobile app, illustrating features like parameter adjustment (F, S, R percentages), carving progress, file management, and options to edit, slice photos, and send files to the motherboard.

6. Spésifikasi

6.1 MKS TS35-R Display Dimensions

Dimensional drawing for MKS TS35-R display, showing length, width, and height in millimeters. — Figure 6: Technical drawing of the MKS TS35-R display. Dimensions are: Length 110mm, Width 65mm, Display area 102mm x 57mm, PCB thickness 1.5mm, Component height 5mm. Mounting holes are 4xΦ3 and 4xR2.

MKS TS35-R Dimensions (Unit: mm)
Fitur	Diménsi
Gemblengna Panjang	110 mm
Gemblengna Width	65 mm
Display Area Length	102 mm
Display Area Width	57 mm
Ketebalan PCB	1.5 mm
Component Height	5 mm
liang ningkatna	4xΦ3, 4xR2

6.2 MKS TS24-R Display Dimensions

Dimensional drawing for MKS TS24-R display, showing length, width, and height in millimeters. — Figure 7: Technical drawing of the MKS TS24-R display. Dimensions are: Length 80mm, Width 50mm, Display area 73mm x 44.5mm, PCB thickness 1.5mm, Component height 5.5mm. Mounting holes are 4xR1 and 4xΦ3.

MKS TS24-R Dimensions (Unit: mm)
Fitur	Diménsi
Gemblengna Panjang	80 mm
Gemblengna Width	50 mm
Display Area Length	73 mm
Display Area Width	44.5 mm
Ketebalan PCB	1.5 mm
Component Height	5.5 mm
liang ningkatna	4xR1, 4xΦ3

7. Pangropéa

To ensure the longevity and optimal performance of your display:

Keep the display clean using a soft, dry cloth. Avoid abrasive cleaners or solvents.
Jaga layar tina goresan sareng benturan.
Ensure proper ventilation around the controller board and display to prevent overheating.
Regularly check cable connections for looseness or damage.

8. Cara ngungkulan

If you encounter issues with your MKS TS35-R or TS24-R display, consider the following:

Layar teu hurung:
- Verify that the MKS DLC32 V2.1 controller board is powered on.
- Check the ribbon cable connection between the display and the board. Ensure it is securely and correctly seated.
Layar rampa teu ngaréspon:
- Restart the controller board.
- Ensure the correct firmware is installed for both the display and the controller board.
Incorrect display information or erratic behavior:
- Update the firmware to the latest version from the official GitHub repository.
- Ensure the display is compatible with your specific MKS DLC32 V2.1 board version.

9. Tips pamaké

Mobile App Convenience: Leverage the "MKSLASER" mobile app for remote control and file management, which can streamline your workflow.
Pembaruan firmware: Regularly check the Makerbase GitHub for firmware updates. These often include bug fixes, performance improvements, and new features.
Manajemén Kabel: Ensure the ribbon cable is not under tension or bent sharply to prevent damage and ensure reliable connection.

10. Garansi jeung Rojongan

For technical support, warranty information, or further assistance, please refer to the official Makerbase documentation or contact your retailer. Always ensure you are using official firmware and following recommended procedures to maintain your product's warranty.

Official firmware and resources are available on the Makerbase GitHub page (links provided in Section 4).

	Manual Wiring MKS DLC32 V2 - Makerbase manual wiring komprehensif pikeun Makerbase MKS DLC32 V2.0 dewan kontrol ukiran offline. Nyertakeun input kakuatan, interfaces, setélan drive motor, laser sarta sambungan spindle, endstops, sarta rojongan teknis.
	Manual pamaké Makerbase MKS DLC32: Hardware jeung Firmware Guide Manual pamaké komprehensif pikeun Makerbase MKS DLC32 controller, detailing interfaces hardware, apdet firmware, jeung métode kontrol pikeun laser engraving jeung mesin CNC.
	Manual Pamaké MKS DLC32 - Makerbase Manual pamaké komprehensif pikeun dewan controller Makerbase MKS DLC32, ngawengku panganteur hardware, apdet firmware, sarta mode kontrol pikeun printer 3D jeung mesin CNC.
	MKS DLC32 MAX Laser Engraving Control Board Manual - Makerbase Manual pamaké komprehensif pikeun dewan kontrol ukiran laser Makerbase MKS DLC32 MAX. Diajar ngeunaan fitur, spésifikasi, sambungan hardware, apdet firmware, kontrol software, jeung ngungkulan.
	Manual MKS DLC32 V2: Fitur, Sambungan, sareng Spésifikasi Manual teknis komprehensif pikeun dewan kontrol mesin ukiran Makerbase MKS DLC32 V2 CNC. Rincian input kakuatan, USB, kartu TF, setélan drive motor, laser sarta sambungan spindle, endstop, usik, I2C, sarta panganteur buzzer, kaasup diagram wiring sarta spésifikasi.
	Makerbase MKS-TFT28 3D Printer Touch Screen LCD: Fitur, Wiring, sareng Pitunjuk Konfigurasi Pituduh komprehensif pikeun Makerbase MKS-TFT28 2.8 inci warna layar toél tampilan LCD pikeun printer 3D. Dokumén ieu rinci ngeunaan fitur-fiturna, kasaluyuan sareng sababaraha papan utama, petunjuk kabel, setélan kakuatan-on, pamutahiran firmware, atanapitagKamampuhan nyimpen, integrasi modul deteksi, kustomisasi poto, sareng konektipitas WiFi, kalebet pilihan kadali jauh via APP, Printrun, sareng Repetier-Host.

Makerbase MKS TS35-R, MKS TS24-R