Makerbase VESC 84100HP High Current ESC User Manual

Bubuka

The Makerbase VESC 84100HP is a high-performance Electronic Speed Controller (ESC) designed for demanding applications such as E-Foils, fight robots, surfboards, and AGV robots. It features a robust design with an aluminum PCB, capable of handling 84V and 100A continuous current. This manual provides essential information for the safe and effective use of your MKSESC 84100HP.

Figure 1: Makerbase VESC 84100HP Top View

Warnings Kasalametan penting

WARNING: Do not connect or disconnect interface devices (USB, encoder, etc.) or power-related components (motor, power supply, etc.) while the system is powered on, as this may cause electrical surges or short circuits, damaging the motherboard.

Note: For enhanced heat dissipation, a generous application of thermal grease was used during assembly. You may notice some thermal grease around the housing seams. This is normal and will not impact the product's performance or safety. Please use the product with confidence.

spésifikasi

The MKSESC 84100HP boasts the following technical specifications:

The MKSESC 84100HP features a three-phase splitter and an adjustable Current/Voltage filter. The current sampling method is phase line sampling, utilizing the ultra-precision bidirectional current detection amplifier INA241A as the phase line sampling chip. This ensures higher accuracy (gain error ± 0.01%, offset voltage ± 10 µV), wider common mode voltage, and more reliable motor data detection. A built-in Bluetooth module allows for configuration and data monitoring (mileage, speed, current, battery, etc.) via the VESC TOOL app on mobile devices.

Figure 2: T2 Tinned Red Copper Strip for Enhanced Performance

The MKSESC 84100HP incorporates T2 tinned copper bars, 2mm thick, to provide excellent over-current capability and superior heat removal performance.

Fitur konci

• Uses current sampling method to sample phase lines.
• Lebar operasi voltage 14V-84V, continuous phase current up to 100A (duration depends on external heat dissipation), maximum pulse current 200A.
• High limit speed 150000ERPM, supports field weakening to increase speed.
• Built-in USB interface for connection with VESC TOOL on PC for configuration, monitoring, and control.
• Built-in Bluetooth module for communication with mobile devices (e.g., smartphones) for configuration, monitoring, and control.
• Built-in current filter and phase filter.
• Supports one-click power on/off and scheduled power off.
• Supports sensorless and sensored motor operation.
• Supports multiple motor types: BLDC brushless motor, Hall motor, DC motor, etc.
• Supports multiple control modes: duty cycle control, speed control, and current control.
• Supports a variety of control interfaces: PPM/PWM signal (RC servo), ADC, UART, I2C, USB, and CAN bus.
• Supports over-current protection, high and low voltage protection, temperature control protection, and adjustable speed limit protection.

Setup sareng Konéksi

Before powering on the MKSESC 84100HP, ensure all connections are secure and correctly wired according to the diagram below. Refer to the VESC TOOL documentation for detailed configuration steps.

Figure 3: MKSESC 84100HP Connection Diagram

Rincian sambungan:

• Batré: Connect your DC 14V-84V (4S-20S) battery to the main power terminals. Ensure correct polarity (+ and -).
• Motor: Connect the three motor phase wires (A, B, C) to the corresponding terminals.
• anteneu: Connect the Bluetooth antenna for wireless communication.
• USB: Use the USB port to connect to a PC for configuration with the VESC TOOL.
• PPM: For RC servo control (e.g., throttle input).
• BISA: For connecting multiple VESC devices or other CAN-enabled peripherals.
• SWD: For debugging and firmware development.
• COMM: General communication port (UART, I2C, etc.).
• AUX: Auxiliary port for various functions.
• RASA: For motor sensor connections (ABI, HALL, AS5047, AS5048A).
• VCC Switch: Selectable interface VCC voltage.
• DC-DC Switch:
  • KEEP ENABLE: Maintain power-on mode, the power supply is not controlled by "Shutdown".
  • PAREUMAN: Turn on the "Shutdown" control mode, the power supply can be started and shutdown through the motor and the "Power Switch" pin.

Firmware Recommendation:

Ensure you are using the recommended VESC firmware version for optimal performance and compatibility.

Figure 4: VESC Firmware and Tool Correspondence

Operasi

The MKSESC 84100HP can be controlled and monitored using either the VESC TOOL on a PC or a compatible mobile application via Bluetooth.

PC Control (VESC TOOL):

Connect the ESC to your PC via the USB port. Launch the VESC TOOL software. You can configure motor parameters, monitor real-time data, and perform basic motor control tests.

Figure 5: VESC TOOL PC Interface for Motor Control

• Press the "FWD" button to control the motor to start rotating forward.
• Press the "REV" button to control the motor to start rotating in reverse.

Kontrol Aplikasi Seluler:

Utilize the built-in Bluetooth module to connect the ESC to a compatible mobile application (e.g., VESC TOOL app). This allows for wireless configuration and real-time monitoring of various parameters.

Figure 6: VESC Mobile App Interface for Motor Control

• Press the "FWD" button to control the motor to start rotating forward.
• Press the "REV" button to control the motor to start rotating in reverse.

Figure 7: VESC Mobile App Real-time Data Display

Produk Leuwihview Video:

Pangropéa

Proper maintenance ensures the longevity and optimal performance of your MKSESC 84100HP.

• Dissipation panas: The aluminum alloy shell is designed to increase heat dissipation. Ensure adequate airflow around the ESC, especially during high-current operation, to prevent overheating.
• Kabersihan: Regularly inspect the ESC for any foreign matter, dust, or debris. Clean the surface gently with a soft, dry cloth. Avoid using liquids or solvents.
• Sambungan: Periodically check all wire connections for tightness and signs of wear or corrosion. Loose connections can lead to poor performance or damage.
• Thermal Grease: As noted in the safety warnings, thermal grease is applied for enhanced heat dissipation. While some may be visible, avoid disturbing it unless performing advanced maintenance, which should only be done by qualified personnel.
• Panyimpenan: Store the ESC in a dry, cool environment away from direct sunlight and extreme temperatures.

Pamérésan masalah

If you encounter issues with your MKSESC 84100HP, consider the following common troubleshooting steps:

• Henteu aya kakuatan:
  • Pariksa sambungan batré jeung pastikeun batréna geus dieusi.
  • Verify the DC-DC switch setting. If set to "SHUTDOWN", ensure the power switch pin is correctly activated.
• Motor teu ngabales:
  • Ensure motor phase wires are correctly connected.
  • Check sensor connections if using sensored mode.
  • Verify VESC TOOL or mobile app settings for motor detection and control mode.
  • Confirm the correct firmware version is installed and compatible with your VESC TOOL.
• Intermittent Operation/Errors:
  • Inspect all communication cables (USB, PPM, CAN) for damage or loose connections.
  • Check for any error codes or warnings displayed in the VESC TOOL.
  • Ensure the ESC is not overheating. Reduce load or improve cooling if necessary.
• Masalah Konektipitas Bluetooth:
  • Ensure the Bluetooth antenna is securely connected.
  • Verify Bluetooth is enabled on your mobile device and the VESC app has necessary permissions.
  • Try restarting both the ESC and your mobile device.

For more advanced troubleshooting or persistent issues, refer to the official Makerbase VESC resources linked in the Support section.

Tip pamaké

• CAN Bus Connection: When connecting two or more ESCs via CAN bus, ensure you use a proper CAN cable. This is crucial for synchronized operation in multi-motor setups.
• Throttle Compatibility: For "plug and play" throttle functionality with scooters, ensure your throttle uses a compatible PPM (RC servo) or ADC signal that can be configured within the VESC TOOL. Many standard e-bike/scooter throttles are compatible, but always verify the signal type.
• Asesoris kaasup: The product typically includes the MKSESC 84100HP unit, a Type-C USB Cable, and a manual. Ensure all components are present upon unboxing.

Figure 8: Shipping List

Rojongan jeung Sumberdaya

For further technical information, firmware updates, and community support, please refer to the official Makerbase resources:

• MKSESC Repository on Github: https://github.com/makerbase-motor (Contains user manuals, firmware, and related documents.)
• MKS ESC Step-by-Step Lessons on YouTube: https://www.youtube.com/playlist?list=PLc2RScfrSFECJst8vKtBXp192P-YP1ry5 (Video tutorials for setup and operation.)

Figure 9: Makerbase-motor Github Repository