Buku Panduan Pangguna Pangontrol Skuter Listrik KUGOO-M4

Bubuka

This manual provides essential information for the installation, operation, and maintenance of your KUGOO-M4 Electric Scooter Controller. This intelligent brushless motor controller is designed to provide stable speed and sensitive control for braking and directional changes, enhancing your electric scooter's performance. The robust metal casing protects the internal circuitry from thermal overload, ensuring durability and reliability.

spésifikasi

Catetan penting: This is a TF-100-EABS controller, not a TF-100-FD-EABS controller. Please verify your scooter's requirements before installation.

Instalasi jeung Wiring

The controller is designed for easy installation. However, due to the complexity of electric scooter wiring, professional installation is recommended if you are unfamiliar with electrical components. Ensure the scooter's power is completely off before beginning any installation.

General Wiring Overview:

• Sambungan Daya: Connect the main power cables (typically thicker red and black wires) from the scooter's battery to the corresponding terminals on the controller.
• Sambungan Motor: Connect the motor phase wires (usually three thicker wires, often blue, green, yellow) from the motor to the controller.
• Kabel Sensor Hall: Connect the motor's Hall sensor wires (usually a thinner bundle of five wires) to the controller's Hall sensor port.
• Throttle/Accelerator: Connect the throttle signal wire to the designated throttle input on the controller.
• Lever rem: Connect the brake lever wires to the controller's brake input. This enables the EABS braking function.
• Display/Meter: Connect the display unit wires to the controller's display port for speed, battery, and other information.
• Asesoris séjén: Connect any other accessories such as lights, horn, or power lock according to your scooter's wiring diagram.

Always refer to your specific electric scooter's wiring diagram for precise connection points and color codes. Incorrect wiring can damage the controller or other scooter components.

Gambar 1: Hareupeun view of the controller, showing the model number and main specifications.

Gambar 2: Top-handap view of the controller, illustrating the wire connections.

Gambar 3: Detil view of the controller's identification label.

Operasi

Once correctly installed, the controller operates automatically to manage the electric scooter's motor. It provides a steady speed and sensitive control for braking and directional changes. The TF-100-EABS model supports EABS (Electronic Anti-lock Braking System) functionality, contributing to safer braking performance.

• Hurungkeun/Pareuman: The controller powers on/off with the scooter's main power switch.
• Kontrol laju: Regulated via the scooter's throttle mechanism.
• ngerem: Activated by the scooter's brake levers, utilizing the EABS feature for controlled deceleration.

Pangropéa

Pikeun mastikeun umur panjang sareng kinerja optimal tina controller anjeun, turutan pedoman perawatan ieu:

• Tetep Bersih: Regularly clean the exterior of the controller to prevent dust and debris buildup, which can affect heat dissipation.
• Pariksa sambungan: Periodically check all wire connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent operation or damage.
• Hindarkeun Overheating: While the metal casing is designed to prevent thermal overload, ensure the controller is installed in a location with adequate airflow and not exposed to direct sunlight for prolonged periods.
• Ngajaga tina Uap: Keep the controller dry and protected from water exposure. Although the casing nawarkeun sababaraha panyalindungan, tapi teu sapinuhna tahan cai.
• Ruksakna Fisik: Avoid physical impacts or dropping the controller, as this can damage internal components.

Pamérésan masalah

If you experience issues with your electric scooter's performance, the controller may be a factor. Here are some general troubleshooting steps:

• Henteu aya kakuatan:
  • Pariksa tingkat muatan batré.
  • Verify all power connections to the controller are secure.
  • Inspect the scooter's main power switch and fuses (if any).
• Motor teu ngabales:
  • Ensure throttle connections are correct and the throttle is functioning.
  • Check motor phase wires and Hall sensor wires for proper connection and damage.
  • Listen for any unusual sounds from the motor or controller.
• Operasi intermittent:
  • Inspect all wiring for loose connections or frayed insulation.
  • Check for signs of overheating on the controller casing.
• Braking Issues:
  • Verify brake lever connections to the controller.
  • Ensure brake sensors are clean and functioning correctly.

If troubleshooting steps do not resolve the issue, it is recommended to consult a qualified technician or contact KUGOO customer support for further assistance.

Tip pamaké

• Verifikasi modél: Always double-check that you have the correct controller model (TF-100-EABS) for your KUGOO M4 scooter. There are similar models (e.g., TF-100-FD-EABS) that may not be compatible.
• Pamasangan profésional: If you are not experienced with electrical work, consider having the controller installed by a professional to avoid damage to the unit or your scooter.
• Perlindungan Lingkungan: Protect the controller from extreme temperatures, direct water spray, and excessive humidity to prolong its lifespan.

Garansi sareng Rojongan

For warranty information, technical support, or replacement parts for your KUGOO-M4 Electric Scooter Controller (Model: TF-100-EABS), please contact the retailer or the official KUGOO customer service. Ensure you have your purchase details and the controller's model number readily available when seeking support.