1. Bubuka
The V100 OBD2 Code Reader is a versatile and user-friendly diagnostic tool designed for EOBD/OBD2 compliant vehicles. This device allows car owners to quickly and easily diagnose engine-related issues, read and clear Diagnostic Trouble Codes (DTCs), view freeze frame data, check I/M readiness status, and retrieve vehicle information. Its plug-and-play design requires no external battery, drawing power directly from the vehicle's OBD2 interface.
2. Fitur konci
- Full OBD II Diagnostic Functions: Read and erase engine fault codes, view freeze frame data, retrieve I/M readiness status, view vehicle information, and perform other OBD2 tests.
- Digital tampilan: Clear and accurate 320x240 dpi LCD display for easy reading of diagnostic results.
- Kasaluyuan Universal: Works with all OBD2 compliant vehicles manufactured since 1996.
- Code Definition: Directly displays DTC definitions on screen, eliminating the need for online searches.
- Henteu Dibutuhkeun Batré: Powered directly by the vehicle's OBD2 interface.
- Rojongan Multi-Basa: Supports 10 languages including English, German, Dutch, Italian, French, Spanish, Polish, Portuguese, Finnish, and Chinese.
- Konstruksi awét: Dijieunna tina bahan ABS.
- Disertipikasi CE: Meets high safety and quality standards.
3. Eusi Paket
Mangga parios pakét kanggo barang-barang ieu:
- 1x V100 Car OBD2 Diagnostic Tool
- 1 x Manual Inggris
4. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| layar | LCD display, 320x240 dpi |
| Voltage Rentang | 8.0 - 18.0 V (powered by vehicle battery) |
| Suhu Operasi | 0°C nepi ka 60°C (32°F nepi ka 140°F) |
| Suhu Panyimpenan | -20°C nepi ka 70°C (-4°F nepi ka 158°F) |
| Bahan | ABS |
| Ukuran (L x W x H) | 18 cm x 12 cm x 3 cm |
| Beurat | 0.221 kg |
| Software Update | No |
| Sertifikasi | CE |
| Basa anu Dirojong | Dutch, English, Finnish, French, German, Italian, Polish, Portuguese, Spanish, Chinese |
5. Kasaluyuan Kandaraan
The V100 OBD2 Code Reader is designed to work with a wide range of vehicles that support OBD2 protocols. Please review the compatibility information below:
5.1 Supported Vehicles
- Mobil Amérika (AS): Cocog sareng Mobil OBD2 Standar ti taun 1996 dugi ka ayeuna (contona, Chrysler, Ford, GM, Jeep).
- Mobil Éropa: Cocog sareng Mobil OBD2 Standar ti taun 2003 dugi ka ayeuna (contona, Alfa Romeo, SAAB, Acura, Opel, Audi, Seat, Bentley, Skoda, Daewoo, Benz, Daihatsu, Land Rover, BMW, Vauxhall, Volvo, VW, Ford, Jaguar).
- Mobil Perancis: Compatible with Standard OBD2 Cars after 2006 (e.g., Citroen, Fiat, Renault, Peugeot).
- Mobil Asia: Cocog sareng Mobil OBD2 Standar ti taun 2007 dugi ka ayeuna (contona, KIA, Isuzu, Honda, Mitsubishi, Hyundai, Dacia, Lexus, Mazda, Nissan, Subaru, Suzuki, Toyota).
- Mobil Cina: Cocog sareng Mobil OBD2 Standar ti taun 2009 dugi ka ayeuna (contona, BYD, Chery, Geely, Great Wall, Karry).
5.2 Supported OBD2 Protocols
- SAE J1850 PWM (41.6Kbaud)
- SAE J1850 VPW (10.4Kbaud)
- ISO9141-2 (5 baud init, 10.4Kbaud)
- ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
- ISO14230-4 KWP (panas gancang, 10.4 Kbaud)
- ISO15765-4 DAPAT (ID 11bit, 500 Kbaud)
- ISO15765-4 DAPAT (ID 29bit, 500 Kbaud)
- ISO15765-4 DAPAT (ID 11bit, 250 Kbaud)
- ISO15765-4 DAPAT (ID 29bit, 250 Kbaud)
5.3 Non-Supported Vehicles/Functions
Please note that this device primarily offers OBD2 functions and does not include special functions like ABS Reset or Airbag Reset. It may not be compatible with all vehicles, especially those that do not fully support the OBD2 protocol or have specific regional variations. The following vehicle types and models are generally NOT supported:
- Electric cars and Hybrid cars (e.g., Nissan Leaf).
- 24V trucks.
- Russian Cars: VAZ, UAZ, LADA.
- Ssangyong Actyon (2009-2017), Ssangyong Korando 2.0 TD Diesel (2013-2017), Ssangyong Kyron 2.0 Diesel (2010-2017), Ssangyong Rexton (2011-2017).
- Opel Corsa C 2004 1.3 CDTI.
- Citroen C4/C5.
- Chevrolet cars.
- Renault Logon, Megane, Clio 2.
6. Setup jeung Connection
Follow these steps to connect and power on your V100 OBD2 Code Reader:
- Manggihan Port OBD2: The 16-pin Data Link Connector (DLC) or OBD2 port is usually located under the dashboard on the driver's side. Refer to the diagram below for common locations.
- Sambungkeun scanner: Plug the V100's OBD2 connector firmly into the vehicle's DLC.
- Hurungkeun Ignition: Turn the vehicle's ignition key to the 'ON' position (engine off). The V100 will automatically power on and display the main menu.
| OBD2 Port Area | Typical Vehicle Brands |
|---|---|
| Wewengkon A | Most models of GM, Volkswagen, Ford, Toyota, Hyundai, Citroen, BMW and other brands |
| Wewengkon B | Honda, Volkswagen Teramont, imported Lexus and other models |
| Wewengkon C | Dongfeng Citroen, Dongfeng Peugeot and other small number of vehicles |
| Area D | Dongfeng Citroen and other small number of vehicles |
| Wewengkon E | Other few vehicles |
7. Parentah Operasi
The V100 features a simple button interface for navigation: KALUAR, DTC, OK, and directional Panah luhur/handap.
7.1 Fungsi Menu Utama
From the Diagnostic Menu, use the Up/Down arrows to navigate and OK pikeun milih:
- Baca Konci: Displays current, pending, and permanent Diagnostic Trouble Codes (DTCs) along with their definitions. This helps identify the cause of the Check Engine Light.
- Hapus Code: Clears all DTCs from the vehicle's computer and turns off the Malfunction Indicator Lamp (MIL). Catetan: Ensure the underlying issue is resolved before clearing codes, as they may reappear.
- View Frame Frame: Shows a snapshot of critical vehicle operating conditions (e.g., engine speed, fuel system status, coolant temperature) at the moment a fault code was set.
- Kesiapan I / M: Checks the status of the vehicle's emission-related monitoring systems to determine if they are ready for an emissions test.
- Émbaran Kandaraan: Retrieves the Vehicle Identification Number (VIN), Calibration ID (CID), and Calibration Verification Number (CVN) of the vehicle.
7.2 Setup Sistim
Access the System Setup menu to configure device settings:
- Basa: Select your preferred operating language (English, German, Dutch, Italian, French, Spanish, Polish, Portuguese, Finnish, Chinese).
- Ukuran Ukuran: Pilih antara unit métrik atanapi imperial.
- Kontras: Adjust the display contrast for optimal visibility.
8. Tips pamaké
- Pariksa kasaluyuan: Always double-check the compatibility list for your specific vehicle's make, model, and year before use. If your vehicle is on the 'Not Supported' list (e.g., Renault Clio 2, certain Ssangyong models), the scanner may not function correctly.
- VIN Retrieval: The device can read your vehicle's VIN (Vehicle Identification Number) under the 'Vehicle Information' menu, which can be useful for various purposes.
- Engine Light Diagnosis: If your 'Check Engine Light' is on, use the 'Read Codes' function to identify the issue. Do not immediately clear codes without understanding the problem, as this can mask a serious underlying fault.
- No Software Updates: This model does not support software updates, so its functionality is fixed.
9. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Scanner teu hurung | Loose connection; Vehicle ignition off; Vehicle battery low/dead; Vehicle not OBD2 compliant. | Ensure the connector is firmly plugged in. Turn ignition to 'ON' (engine off). Check vehicle battery. Verify vehicle is OBD2 compliant. |
| "LINK ERROR" message | Communication failure; Vehicle not OBD2 compliant; Faulty DLC. | Ensure ignition is 'ON'. Check if the vehicle is OBD2 compliant. Try connecting to another OBD2 compliant vehicle if possible. Inspect the vehicle's DLC for damage. |
| Cannot read codes / "NO DTCs" | No fault codes present; Vehicle not fully compliant; Incorrect menu selection. | If no codes are present, this is normal. Ensure the vehicle is OBD2 compliant. Select 'Read Codes' from the main menu. |
| Codes reappear after clearing | Masalah kandaraan anu jadi dadasarna teu acan direngsekeun. | Clearing codes only resets the warning light. The root cause of the fault must be repaired for codes to stay cleared. |
10. Pangropéa sareng Panyimpenan
- beberesih: Ngagunakeun lemes, damp lawon pikeun ngabersihan alat. Ulah make cleaners abrasive atawa pangleyur.
- Panyimpenan: Store the V100 in a dry, cool place, away from direct sunlight and extreme temperatures. The recommended storage temperature is -20°C to 70°C (-4°F to 158°F).
- Penanganan: Ati-ati nalika nanganan alat ieu pikeun nyegah karusakan fisik.
11. Garansi jeung Rojongan
For any questions, technical assistance, or warranty inquiries, please contact the seller or retailer from whom you purchased the V100 OBD2 Code Reader. Keep your purchase receipt as proof of purchase.
12. Patarosan anu Sering Ditaroskeun (FAQ)
- Q: Does this device read VIN numbers?
- A: Yes, the V100 can read the Vehicle Identification Number (VIN) under the 'Vehicle Information' menu.
- Q: Is it compatible with my Suzuki Alto 800 year 2019?
- A: The device is generally compatible with Asian cars from 2007 onwards. However, specific models can vary. Please refer to the detailed compatibility list in Section 5 or contact the seller with your vehicle details (make, model, year, engine size, fuel type) for confirmation.
- Q: Will it work with a Mercedes-Benz CLA 200 2017?
- A: The device is compatible with European cars from 2003 onwards, which includes Mercedes-Benz. It should work for your 2017 model.
- Q: Does it support Ford Transit 2005 and Fiat Ducato 2009?
- A: For European cars, compatibility starts from 2003. Therefore, it should support a Ford Transit 2005 and Fiat Ducato 2009, provided they are standard OBD2 compliant.
- Q: Will it work on Renault Clio 2003?
- A: No, the V100 explicitly states that it does not support Renault Clio 2 models.
