Buku Panduan Pangguna Mesin Bubut Logam Mini VEVOR

1. Bubuka

Thank you for choosing the VEVOR Mini Metal Lathe. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new machine. The VEVOR Mini Metal Lathe is designed for precision machining, ideal for various processing tasks including turning, drilling, threading, and cutting. Its robust construction and variable speed control ensure craftsmanship and precision, allowing you to meet stringent specifications for your projects.

Please read this manual thoroughly before operating the lathe and keep it for future reference.

2. Parentah Kasalametan

PERHATOSAN: Gagal nuturkeun parentah kaamanan ieu bisa ngakibatkeun tatu serius atawa maot.

• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and suitable clothing. Avoid loose clothing, jewelry, and long hair that can get caught in moving parts.
• Ensure the lathe is securely mounted on a stable, level surface before operation.
• Jaga wewengkon gawé beresih, cahayana alus, sarta bébas tina clutter.
• Ulah pernah ngoperasikeun mesin bubut dina pangaruh obat-obatan, alkohol, atanapi ubar anu tiasa ngaganggu penilaian.
• Always disconnect power before performing any maintenance, adjustments, or when changing accessories.
• Ulah ninggalkeun mesin unattended bari eta dijalankeun.
• Use only sharp, correctly ground cutting tools.
• Pastikeun workpiece geus aman clamped in the chuck or collet.
• Never attempt to stop the chuck or workpiece with your hand.
• Keep hands clear of all moving parts, especially the chuck, tool post, and lead screw.
• Use the automatic power-off cover and emergency stop button in case of an unexpected event.
• Do not exceed the recommended cutting depths or speeds for the material being machined.
• Always remove the chuck key before starting the lathe.

3. Produk Langkungview jeung Fitur

The VEVOR Mini Metal Lathe is equipped with several features designed for precision and ease of use:

Komponén konci & Fitur:

• Infinitely Variable Speeds: Spindle adjustable speed for multiple workings, ranging from 0-3000 RPM (model dependent).
• Motor anu kuat: Available with 750W, 1200W, or 1500W brushed or brushless DC motors.
• 4-Way Tool Post: Allows easy changing of cutting tools and angles for versatile machining operations.
• 3-Jaw Chuck: Capable of securely holding both square and round workpieces with ease.
• Ultra-precise Movable Tailstock: Provides support for longer workpieces and facilitates drilling operations.
• Digital tampilan: Clear display for monitoring spindle speed and other operational parameters.
• Automatic Power-off Cover: Enhances safety by automatically cutting power when opened.
• Tombol eureun darurat: For immediate shutdown in critical situations.
• Horizon Blade Switch: For specific operational controls.
• Konstruksi Logam Unggul: Ngajamin daya tahan sareng stabilitas salami operasi.
• Steady Rest & Follow Rest: Provides additional support for long and slender workpieces, reducing vibration and improving accuracy.

Produk Video:

4. Spésifikasi

The VEVOR Mini Metal Lathe is available in several configurations. Please refer to the table below for detailed specifications of each model:

Note: Specifications may vary slightly between production batches.

5. Setélan

5.1 Ngabongkar sareng Inspeksi

1. Carefully remove the lathe from its packaging.
2. Inspect the machine for any signs of damage that may have occurred during transit. Report any damage immediately to the supplier.
3. Remove all packing materials, protective coatings, and ties.
4. Clean all machined surfaces with a suitable degreaser to remove any rust preventative oils.
5. Verify all components listed in the "Package Content" section (see Specifications) are present.

5.2 Nempatkeun

• Choose a sturdy workbench or stand capable of supporting the weight of the lathe and any workpieces.
• Ensure the surface is level to maintain machining accuracy.
• Position the lathe in a well-ventilated area with adequate lighting.
• Allow sufficient space around the machine for safe operation and maintenance.

5.3 Sambungan Listrik

• Pastikeun catu daya cocog sareng voltage requirements of the lathe (EU standard 220V).
• Sambungkeun mesin bubut ka stop kontak listrik anu di-ground.
• Entong nganggo kabel ekstensi kecuali upami leres-leres diperyogikeun, sareng pastikeun éta dipeunteun pikeun kabutuhan daya mesin.

5.4 Pelumasan Awal

• Before first use, lubricate all moving parts, including the lead screws, gears, and ways, with appropriate machine oil.
• Refer to the lubrication points indicated in the detailed manual (if available) or common lathe lubrication practices.

6. Parentah Operasi

6.1 Daya Hurung/Pareuman

1. Ensure all safety covers are closed and the chuck key is removed.
2. Puterkeun saklar daya utama ka posisi "ON".
3. The digital display should illuminate.
4. To turn off, switch the main power to "OFF". In an emergency, press the red Emergency Stop button.

6.2 Adjusting Spindle Speed

• The lathe features infinitely variable speed control.
• Use the speed control knob (refer to Figure 3.3 or 6.1) to adjust the spindle RPM.
• Monitor the current speed on the digital display.
• Always select a suitable speed for the material and cutting tool being used.

6.3 Workpiece Mounting

• Open the 3-jaw chuck jaws using the chuck key.
• Insert the workpiece and tighten the jaws securely. Ensure the workpiece is centered and held firmly.
• IMPORTANT: Always remove the chuck key immediately after tightening or loosening the chuck.
• For longer workpieces, use the tailstock for additional support.

6.4 Tiang Pakakas sareng Pakakas

• Tiang pakakas 4 arah ngamungkinkeun pikeun ngaganti pakakas motong kalayan gancang.
• Insert the cutting tool into the tool holder and adjust its height to be on the center line of the workpiece.
• Securely tighten the tool holder.
• Ensure the tool is sharp and appropriate for the material and operation (turning, facing, threading, etc.).

6.5 Basic Machining Operations

• Ngabuburit: Advance the cutting tool into the rotating workpiece to remove material and create cylindrical shapes.
• Nyanghareupan: Move the cutting tool across the end of the workpiece to create a flat surface.
• Pangeboran: Mount a drill bit in the tailstock and advance it into the center of the workpiece.
• Threading: Requires specific gear settings and tool setup. Refer to the threading chart on the machine for correct gear combinations for imperial and metric threads.

7. Pangropéa

Regular maintenance is crucial for the longevity and optimal performance of your VEVOR Mini Metal Lathe.

7.1 Pangropéa poean

• Clean the machine thoroughly after each use, removing all chips and debris.
• Wipe down all exposed metal surfaces, especially the bed ways, to prevent rust.
• Check and top up lubrication points as needed.

7.2 Pangropéa Mingguan / Bulanan

• Inspect all belts for wear and tension. Adjust or replace if necessary.
• Check all fasteners for tightness and tighten any loose bolts.
• Lubricate lead screws, cross slide, and compound slide mechanisms.
• Inspect cutting tools for sharpness and replace or sharpen as needed.

7.3 Panyimpenan Jangka Panjang

• Ngabersihan mesin tuntas.
• Apply a thin coat of rust preventative oil to all unpainted metal surfaces.
• Cover the lathe with a protective cover to prevent dust accumulation.

8. Cara ngungkulan

9. Tips pamaké

• Mimitian Lambat: When beginning a new cut or working with unfamiliar material, start with lower speeds and shallower cuts. Gradually increase as you gain confidence and observe the material's response.
• Coolant Use: For many materials, especially metals, using a cutting fluid or coolant can significantly improve surface finish, extend tool life, and prevent overheating of the workpiece and tool.
• Chip Management: Regularly clear chips from the work area to prevent interference with cutting operations and to maintain a clear view tina workpiece.
• Tool Bit Selection: Invest in a variety of high-quality tool bits suitable for different materials and operations. Proper tool geometry is key to good results.
• Practice on Scrap: Before working on a critical project, practice on scrap material to dial in your settings and technique.

10. Garansi jeung Rojongan

VEVOR provides a one-year warranty for this Mini Metal Lathe, covering manufacturing defects and malfunctions under normal use. We are committed to solving all your after-sales problems.

For warranty claims, technical support, or spare parts, please contact VEVOR customer service through your purchase platform or visit the official VEVOR websitus pikeun detil kontak panganyarna.

merek: VEVOR

Pabrikan/Pangjual: VEVOR EU Store