Bubuka
This manual provides instructions for the Scimagic-RC compatible remote control for HORMANN ECOSTAR garage door openers. This remote utilizes rolling code technology for enhanced security and operates at a frequency of 433.92MHz. It is designed to be compatible with specific HORMANN ECOSTAR remote control models and various garage door receiver models.
Bantahan penting: Your existing remote control must be identical to the one shown in the product images, and your receiver model must be listed in the compatibility section below. Compatibility with other remotes is not guaranteed.
spésifikasi
| Fitur | Rincian |
|---|---|
| Ngaran Brand | Scimagic-RC |
| Nomer modél | Hormann ecostar rsc2 433 |
| Métode Encoding | Kodeu Rolling |
| Frékuénsi | 433.92MHz |
| Jumlah Saluran | 4 |
| Rentang Gawé | 10-50 méter (ruang terbuka) |
| Sasayogian tanaga | 12V 27A / CR2032 (in-built) |
| Suhu Gawé | -20°C nepi ka +50°C |
| Jenis Pamrograman | Programming with receiver |
| Ukuran (approx.) | 54*30*14mm or 55*45*8mm (depending on variant) |
| Sertifikasi | CE |
| Asalna | Daratan Cina |
Modél Remote Control anu Cocog:
- ECOSTAR RSC2-433
- ECOSTAR RSE2-433
Compatible Receiver Models:
- Liftronic 500
- Liftronic 700
- Liftronic 800
- Portronic D5000
- Portronic D2500
- Portronic S4000
Image: Detailed specifications including frequency, code type, channels, range, power supply, and operating temperature.
Image: Various product certifications such as RoHS, CE, and FCC.
Eusi pakét
Bungkusan produk biasana ngawengku barang-barang ieu:
- 1x Kadali Jauh
- 1x Battery (in-built)
- 1 x Gantungan Kunci
- 1 x Manual Inggris
Pidéo: Unboxing sareng réngséview of the remote control and its included accessories.
Setup jeung Programming
To program your new remote control, you must have access to your garage door opener's receiver. The programming process involves interacting directly with the receiver unit.
Image: Illustrates holding the remote control near a Hormann ProLift garage door opener, indicating its use.
Image: Demonstrates the remote control being used to program a garage door opener, emphasizing the 'Program On Receiver' method.
Léngkah-léngkah Pemrograman:
- Locate the Receiver: Open your receiver unit, typically found under the motor cover of your garage door opener or in a separate control box next to the motor.
- Aktipkeun Mode Pemrograman: Press the programming button on the receiver. This button is usually labeled 'ENR', 'MEMO', or 'PROG'. On some receivers, you may need to hold down the programming button for a few seconds.
- Niténan Indikator LED: The LED on the receiver will indicate when it has entered programming mode (e.g., it might light up, flash, or change color).
- Transmit from New Remote: Press a button on your new remote control for one second, then release it.
- Konfirmasi Pemrograman: The receiver's LED will change its behavior (e.g., light differently or turn off) to confirm successful programming.
- Kaluar Mode Programming: Wait a few seconds for the receiver to automatically exit programming mode.
Your new remote control is now programmed and ready for use.
Parentah Operasi
Sakali diprogram, ngoperasikeun remote control téh gampang:
- Press any of the programmed buttons on the remote control to activate your garage door or gate opener.
- Ensure you are within the effective working range of 10-50 meters (in open space) for optimal performance.
Image: Illustrates the remote control's versatility for various door types (furniture, main, garage, courtyard) and its operating frequency and range.
Image: Shows a hand using the 4-button remote control to operate an outdoor gate.
Pangropéa
Ngagantian batré
The remote control is powered by a 12V 27A or CR2032 battery. If the remote's indicator light does not illuminate or its range decreases significantly, it may be time to replace the battery.
Image: Step-by-step visual instructions for opening the remote and replacing the CR2032 battery.
- Buka remot kontrol kalayan ati-atiasing.
- Leupaskeun batré CR2032 heubeul.
- Selapkeun batré CR2032 anyar, mastikeun polaritasna bener.
- Close the remote control casing aman.
No reprogramming is typically required after battery replacement.
Pamérésan masalah
- Remote not responding after programming:
- Ensure you have full access to your receiver/opener and followed all programming steps correctly.
- Check the receiver's LED feedback during programming to confirm it entered and exited programming mode successfully.
- Verify that your old remote is indeed the same model as advertised and that your receiver is on the compatible list.
- Rentang operasi terbatas:
- Replace the remote control's battery.
- Pastikeun teu aya halangan anu signifikan antara remot sareng panarima.
- Remote indicator light not working:
- Batré bisa béak. Ganti batréna.
Tip pamaké
- Always ensure you have physical access to your garage door opener's receiver before attempting to program a new remote. This is crucial for successful pairing.
- Note the dimensions of your remote (either 54*30*14mm or 55*45*8mm) to ensure you have the correct variant for any accessories or cases.
- Keep the remote in a safe, dry place to prolong its lifespan.
Garansi sareng Rojongan
This product typically comes with a 1-year warranty from the store of purchase, covering manufacturing defects. For any issues or support inquiries, please refer to your purchase documentation or contact the seller directly.
