Anern Hybrid Solar Inverter Instruction Manual

1. Bubuka jeung Leuwihview

This manual provides detailed instructions for the installation, operation, and maintenance of your Anern Hybrid Solar Inverter. The Anern Hybrid Solar Inverter is a pure sine wave inverter designed for off-grid solar systems, capable of running with or without a battery (note: low power inverters of 3.2KW and below require battery connection for use). It features a built-in MPPT solar charge controller and offers multiple charging and output modes to suit various application requirements.

The AN-SCI-MAX series includes models up to 10.2KW, while the AN-SCI-ECO series covers models up to 6.2KW. Both series are designed for efficiency and reliability in managing solar power.

2. Émbaran Kasalametan

WARNING: This is an off-grid inverter. Please read all safety instructions carefully before installation and operation.

• Low power inverters (3.2KW and below) must be connected to batteries for proper operation.
• The starting power of inductive loads should be at least three times the inverter's rated power to prevent damage.
• Ensure all circuits are connected correctly and install appropriate circuit breakers for each circuit.
• Always follow the correct power-on and power-off sequence.

Power On Order:

1. First, turn on the battery.
2. Mimitian inverter.
3. Then, turn on the circuit breakers for photovoltaic (PV), mains, and load.

Power Off Order (Reverse of Power On):

1. First, turn off the circuit breakers for load, mains, and photovoltaic (PV).
2. Pareuman inverter.
3. Finally, turn off the battery.

3. Fitur Produk

The Anern Hybrid Solar Inverter offers a range of advanced features for efficient solar power management:

• Kaluaran Gelombang Sinus Murni: Provides high-quality and stable AC current, compatible with most loads, protecting electrical devices and extending their service life.
• Operasi bébas batré: Capable of running without a battery (for models above 3.2KW). For battery-free operation, the solar module voltage must exceed 360V DC.
• One-Key Factory Reset: Convenient function for restoring default settings.
• PV Automatic Lithium Battery Activation: Solar input can automatically activate lithium batteries.
• Integrated MPPT Solar Controller:
• 160A MPPT solar controller for 10.2KW models.
• 120A MPPT solar controller for AN-SCI-ECO series.
• High Solar Input Power: Max 7500W (for 4.2KW) & 10800W (for 6.2KW) solar charge.
• Vol Input PV Legatage Rentang: 90-450VDC for AN-SCI-MAX, 60-450VDC for AN-SCI-ECO.
• Pakakas Anti-Kebu: Built-in for enhanced durability in harsh environments.
• Desain Ngecas Batré Pinter: Optimizes battery lifespan.
• Dual PV Input & AC Output (10.2KW models):
• Two independent MPPTs for convenient solar panel wiring and reduced need for sink boxes.
• Dual AC output with primary and secondary circuits. If PV and mains are absent and battery voltage is low, the primary circuit shuts down, and only the secondary output is maintained (Super Power Saving mode).
• Pemantauan WIFI: Available for iOS and Android systems, allowing remote system control and monitoring.
• Jenis batré anu cocog: Supports Lead-acid, Lithium iron phosphate (LiFePO4), Gel, AGM, FLD, SLD, and user-defined battery types.
• Touch Button & LED Display: User-friendly interface for monitoring and control.

4. Eusi Paket

Saatos muka bungkusan, mangga pastikeun sadaya barang aya sareng henteu ruksak:

• Anern Hybrid Solar Inverter Unit
• Manual pangguna (dokumén ieu)
• Communication Cable (if applicable)
• Parabot Pemasangan (upami aya)
• PV Cover (if applicable)

5. Setup jeung Instalasi

Proper installation is crucial for the safe and efficient operation of your inverter. Refer to the system diagram and port overview pikeun sambungan.

5.1 Diagram Sistem

The inverter connects to solar panels, an optional generator, utility grid, external battery packs, and powers home appliances. Ensure all connections are secure and correctly polarized.

5.2 Produk Leuwihview sareng Idéntifikasi Pelabuhan

Key components and ports:

1. tampilan LCD
2. Indikator status
3. Indikator ngecas
4. Indikator lepat
5. Toél tombol Fungsi
6. Power on / off switch
7. input AC
8. Kaluaran utama
9. Kaluaran kadua
10. Input PV1 sareng PV2
11. RS-232 / WIFI / Cabut port komunikasi LCD
12. Input batré
13. Kit anti lebu

5.3 Pedoman Koneksi

• Input PV: Connect solar panels to PV1 and PV2 inputs (10). Ensure PV input voltage is within the specified range (90-450VDC for AN-SCI-MAX, 60-450VDC for AN-SCI-ECO).
• Sambungan batré: Connect battery bank to Battery input (12). Observe correct polarity (+/-). Remember, low power inverters (3.2KW and below) require battery connection.
• Input AC: Connect utility grid to AC input (7).
• Kaluaran AC: Connect main loads to Main output (8) and secondary loads to Second output (9).
• Komunikasi: Use the RS-232/WIFI/Remove LCD communication port (11) for monitoring and control via WIFI.

Refer to the Safety Information section for the correct power-on and power-off sequence.

6. Parentah Operasi

Inverter ieu ngagaduhan tampilan LCD anu intuitif sareng tombol toél pikeun operasi sareng pangawasan anu gampang.

6.1 Pintonan sareng Kontrol

The LCD display (1) shows real-time system status, including input/output voltage, current, power, and battery status. Use the touch function buttons (5) to navigate menus, adjust settings, and view parameter béda.

6.2 Modeu catu daya

The inverter supports three priority power supply modes:

1. Prioritas Utiliti: The inverter primarily uses utility power, with solar and battery as backup.
2. Solar Panel Priority: The inverter prioritizes solar power, using utility or battery as backup when solar is insufficient.
3. Prioritas Batré: The inverter prioritizes battery power, using solar or utility as backup.

6.3 WIFI Monitoring

Utilize the built-in WIFI module to monitor and control your inverter system via a mobile application (available for iOS and Android). This allows for remote access to system data and settings.

7. Pangropéa

Regular maintenance ensures the longevity and optimal performance of your Anern Hybrid Solar Inverter.

• beberesih: Periodically clean the inverter's exterior and ventilation openings to prevent dust buildup. The built-in anti-dust kit helps, but regular cleaning is still recommended.
• Sambungan: Rutin pariksa sadaya sambungan listrik (PV, batré, input / output AC) pikeun tightness jeung tanda korosi.
• Kaséhatan batré: Monitor batré voltage and charge cycles. The smart battery charge design helps optimize battery lifespan, but proper battery care is essential.
• Pembaruan firmware: Pariksa produsén urang websitus atanapi aplikasi pikeun apdet firmware anu sayogi pikeun mastikeun inverter anjeun ngagaduhan fitur pangénggalna sareng perbaikan bug.
• Kaayaan Lingkungan: Ensure the inverter is installed in a well-ventilated area, free from excessive heat, moisture, and direct sunlight.

8. Cara ngungkulan

If you encounter issues with your inverter, refer to the following basic troubleshooting steps. For more complex problems, contact customer support.

• Taya Daya/Pareuman:
• Check the power on/off switch (6).
• Verify battery connections and voltage.
• Ensure AC input is present if operating in utility-dependent modes.
• Teu aya Daya Kaluaran:
• Check circuit breakers for PV, mains, and load.
• Verify load connections.
• Check for fault indicators (4) on the display.
• Masalah ngecas:
• Ensure solar panels are connected correctly and receiving sufficient sunlight.
• Pariksa PV input voltage rentang.
• Verify battery type settings are correct for your connected battery.
• Kaleuwihan beban/panas teuing:
• Ngurangan beban disambungkeun.
• Ensure adequate ventilation around the inverter.
• Check for blockages in the anti-dust kit (13) or vents.
• Communication Issues (WIFI):
• Ensure the WIFI module is properly connected.
• Pariksa sambungan jaringan anjeun.
• Restart the inverter and your mobile device.

Always refer to the LCD display for specific error codes or warnings, which can help diagnose the problem.

9. Spésifikasi

Below are the general specifications for the Anern AN-SCI-MAX-10200 model. Specifications may vary slightly between different models (e.g., 6.2KW, 4.2KW, 3.2KW, 2KW) and configurations (with/without WIFI).

10. Garansi jeung Rojongan

Anern is committed to providing high-quality products and customer satisfaction. Your inverter comes with certain guarantees and support services:

• Pulangan Gratis: Enjoy free returns within 15 days of delivery.
• Garansi pangiriman gancang: Upami pangiriman telat, anjeun tiasa nampi kode kupon $1.00.
• Pangembalian dana pikeun Masalah: Refunds are provided if the package is lost or items are damaged during transit.
• No Delivery Refund: A full refund is available if the item is not delivered within 20 days.

For technical support, warranty claims, or any other inquiries, please contact your seller or refer to the official Anern websitus pikeun inpo kontak.