Instruksi Manual

Bubuka

This manual provides essential information for the safe and effective use of your new Battery Converter Adapter. This adapter is designed to allow the use of Black&Decker, Porter-Cable, and Stanley 18V/20V Li-Ion batteries with Parkside 20V Li-Ion power tools, enhancing versatility and compatibility across your tool collection. Please read these instructions carefully before use and retain them for future reference.

Émbaran Kasalametan

• Always ensure the adapter and batteries are clean and free from debris before connection.
• Do not attempt to charge batteries through this adapter. This adapter is for power conversion only.
• Do not use the adapter if it appears damaged or faulty.
• Keep the adapter away from water, heat, and direct sunlight.
• Ensure the battery and tool are securely connected to the adapter before operation.
• Disconnect the battery from the adapter and the adapter from the tool when not in use.

Setup sareng Sambungan

Follow these steps to properly connect your battery and tool using the adapter:

1. Identify Compatible Batteries: Ensure you are using a compatible Black&Decker, Porter-Cable, or Stanley 18V/20V Li-Ion battery. Refer to the 'Specifications' section for a list of compatible battery models.
2. Identify Compatible Tools: Ensure you are using a compatible Parkside 20V Li-Ion tool. Refer to the 'Specifications' section for a list of compatible tool battery models.
3. Attach Battery to Adapter: Slide your compatible Black&Decker/Porter-Cable/Stanley 18V/20V Li-Ion battery onto the bottom interface of the adapter until it clicks securely into place.
4. Attach Adapter to Tool: Slide the adapter (with the battery attached) onto the battery port of your Parkside 20V Li-Ion tool until it clicks securely into place.
5. Pariksa sambungan: Gently tug on the connections to ensure both the battery and the tool are firmly attached to the adapter.

Parentah Operasi

Once the adapter, battery, and tool are securely connected:

• Operate your Parkside 20V tool as you normally would with its native battery. The adapter facilitates the power transfer from the Black&Decker/Porter-Cable/Stanley battery to the Parkside tool.
• Monitor the battery level of your Black&Decker/Porter-Cable/Stanley battery. The adapter does not provide battery level indication; rely on the battery's built-in indicator if available, or your experience with its run time.
• When the battery is depleted, remove the adapter and battery from the tool, then detach the battery from the adapter for charging using its original charger.

Important Note: This converter does NOT support charging batteries. Always use the original charger for your Black&Decker/Porter-Cable/Stanley batteries.

Pangropéa

• beberesih: Wipe the adapter with a dry, clean cloth to remove dust and debris. Do not use liquids or abrasive cleaners.
• Panyimpenan: Store the adapter in a dry, cool place away from direct sunlight and moisture when not in use.
• Pamariksaan: Periodically inspect the adapter for any signs of wear, cracks, or damage to the electrical contacts. If damage is found, discontinue use immediately.

Pamérésan masalah

• Alat teu hurung:
  • Pastikeun batréna dieusi pinuh.
  • Verify that both the battery and the adapter are securely clicked into place.
  • Check if the battery itself is functioning correctly with its original tools.
  • Inspect the adapter's contacts for any obstruction or damage.
• Battery not fitting adapter:
  • Confirm your battery is one of the compatible models listed in the 'Specifications' section.
  • Ensure correct orientation when attempting to slide the battery onto the adapter.
• Adapter not fitting tool:
  • Confirm your tool is a compatible Parkside 20V Li-Ion model.
  • Ensure correct orientation when attempting to slide the adapter onto the tool.

spésifikasi

Tip pamaké

• Always ensure the battery is fully charged before connecting it to the adapter and tool for optimal performance.
• For prolonged tool life, avoid completely draining the battery during use.
• Keep the adapter clean and free of dust to maintain good electrical contact.

Garansi sareng Rojongan

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty service.