LED Backlight Strip for TVs

1. Bubuka

These LED backlight strips are designed as replacement parts for various 32-inch television models. They provide illumination for the LCD panel, ensuring clear and vibrant display quality. The product is certified with CE and CCC standards, ensuring compliance with safety and quality regulations.

2. Spésifikasi

Compatible TV Models (Partial List):

• Crown LED 32185, LED 32472SM, LED 32776
• Finlux 32FD4041H, 32FHB4001, 32FLYR274S
• Hitachi 32C690, 32EH2000, 32HB4T41
• Hyundai 32HYN185DLED, 32HYN276
• JVC LT-32C345, LT-32C60, LT-32K380
• Telefunken 32XT3000D, 32XT5000DST, A32F445, D32F197Q, T32TX182DLB
• Vestel 32D1333DB, 32D1334DB, 32L1353DB, 32W1333DB
• And many other models using VES315WND series panels.

3. Pancegahan Kasalametan

WARNING: Non-professionals should not attempt to replace the LED backlight strips. Improper handling can lead to injury or damage to the television. Seek assistance from a professional technician if you are not confident in your technical skills.

• The LCD screen is extremely fragile. Handle with utmost care during disassembly and installation to prevent damage.
• Beware of bright light emitted by the LEDs during testing. Avoid direct eye exposure.
• When testing the LED strips, ensure correct polarity (positive/negative terminals) to prevent damage to the strips or the TV's power supply.
• Always disconnect the TV from the main power supply before beginning any repair or installation work.

4. Parentah instalasi

Replacing LED backlight strips requires careful attention to detail. Follow these steps:

1. Pembongkaran: Carefully disassemble your TV, paying close attention to the LCD screen. Remember, the LCD screen is very fragile.
2. Panyabutan Jalur Lama: Gently remove the old, faulty LED backlight strips.
3. New Strip Preparation: Upon receipt, do NOT remove the blue adhesive backing from the new LED strips immediately.
4. Uji Awal: After placing the new strip in position (without fully adhering it), power on the TV and test the new strip for 3-10 minutes to ensure it lights up properly and functions as expected. This step is crucial to verify functionality before final assembly.
5. 

   Figure 1: Two LED backlight strips (JL.D320B1235-078CS-C, VES315WNDS-2D-N1) measuring 575mm, with each LED operating at 3V.

6. 

   Gambar 2: Rincian view of the LED strip showing the individual LED components and connection points.

7. Adhesion ahir: Only after confirming normal operation during the initial test, remove the blue adhesive backing and firmly attach the strip to its designated position.
8. Alignment: During installation, align the new LED strip exactly with the position of the old strip. Incorrect alignment may cause mismatch with the reflective sheet holes, leading to light leakage or uneven illumination.
9. 

   Figure 3: Close-up of the LED strip showing individual LED labels (LED1-LED4) and the part number JL.D320B1235-078CS-C.
10. 

    Gambar 4: Detil view of the circuit board markings on the LED strip, including the part number and manufacturing details.

11. Optical Film Orientation: Do not mix up the order or orientation of the light guide plate and optical films. After removal, carefully note their sequence and front/back sides. Incorrect reinstallation may lead to color distortion, uneven tint, visible shadows, or individual LEDs being seen from outside the TV.
12. 

    Gambar 5: Tukangeun view of the LED strips, illustrating the pre-applied adhesive backing for secure installation.

13. Reassembly: Once the new strips are securely installed and tested, carefully reassemble the TV components in reverse order of disassembly.

5. Operasi

Once the LED backlight strips are correctly installed, the TV will operate as usual. The backlight will illuminate automatically when the TV is powered on. No special operation is required for the LED strips themselves.

6. Pangropéa

• Keep the interior of your TV clean and free from dust to ensure optimal performance and longevity of the LED strips.
• Avoid exposing the TV to excessive moisture or extreme temperatures.
• Do not attempt to clean the LED strips directly with liquids. If cleaning is necessary, use a dry, soft cloth.

7. Cara ngungkulan

• LED strips not lighting up: Ensure correct polarity during connection. Recheck all connections. Verify that the TV's power supply is functioning correctly.
• Uneven illumination or visible shadows: This often indicates incorrect alignment of the LED strips or improper reinstallation of the light guide plate and optical films. Carefully re-check the alignment and orientation as described in the installation section.
• Color distortion: May be caused by incorrect reinstallation or mixing up the order/orientation of optical films.
• Individual LEDs visible from outside the TV: This is a symptom of incorrect reinstallation of optical films.

8. Tips pamaké

• Sateuacan meuliasing, always verify the exact model number and specifications of your existing LED strips against the product description to ensure compatibility.
• Take photos during each step of the TV disassembly process. This will serve as a helpful guide during reassembly.
• Work in a clean, well-lit area to avoid losing small components and to ensure proper visibility during delicate tasks.

9. Garansi jeung Rojongan

For any issues or questions regarding the product, please contact the seller directly. For additional technical details and diagrams, you may refer to the official user manual available in PDF format: Manual Pamaké (PDF).