1. Bubuka
The Jebao Jecod EOW Series Aquarium Wave Maker is a professional wave-making pump designed to create a natural ecological environment within your aquarium. It enhances aquascaping, promotes coral growth and feeding, aids in aeration, and assists in the removal of fish waste. This intelligent and ultra-quiet pump offers superior performance and reliability for both freshwater and saltwater aquariums.
2. Fitur konci
- Desain ramping: Easy to hide within your aquascape without distraction.
- Kinerja anu kuat: Small yet powerful, aiding aeration and fish waste removal.
- Minimum Noise: Utilizes Permanent Magnet Synchronous Motors (PMSMs) for low noise operation, typically below 30dB, ensuring a quiet environment.
- Rojongan nirkabel: WIFI App control via the 'Jebao Aqua' mobile application, allowing remote operation even when traveling.
- Auto Frequency Control: A single mobile device can support and link up to 32 different wave maker units simultaneously, restoring a realistic natural water flow.
- Setélan Pribadi: Features 1440 Segment Mode with 71 gear flow and 71 gear frequency free adjustment for precise control.
- Fitur kaamanan: Built-in safety shut-offs and a fault indicator for easy troubleshooting.
- Pamasangan stabil: Strong magnetic base with suction cups ensures the pump body is stable, quiet, and easy to disassemble.
3. Eusi Paket
Saatos ngabongkar bungkusan, pastikeun sadaya komponén ieu aya:
- Wave Maker Pump Unit
- Turbine-shaped Protection Net
- Permanent Magnet Impeller
- Super Permanent Magnet (for mounting)
- Kakuatan Clamp
- Controller (for EOW-M models)
- Power Adapter (with complimentary regional plug adapter)
4. Spésifikasi
The Jebao Jecod EOW Series offers various models with different power and flow rates. Please refer to the table below for detailed specifications:
| Modél | Daya (W) | Flow Rate (L/H) | Dianjurkeun Ukuran tank | Voltage | Max Wayah | Diaméter outlet | Magnetic Attraction Thickness |
|---|---|---|---|---|---|---|---|
| EOW-3 / EOW-3M | 1.8-6W | 900-3000 | 0.3m | DC 12V | N/A | 45*62 MM | ≤8MM |
| EOW-5 / EOW-5M | 12W | 1500-5000 | 52-72 cm | DC 24V | 5000L/H | 31 mm | 8 mm |
| EOW-9 / EOW-9M | 23W | 3000-9000 | 60-100 cm | DC 24V | 9000L/H | 46 mm | 12 mm |
| EOW-16 / EOW-16M | 35W | 4800-16000 | 100-150 cm | DC 24V | 16000L/H | 59 mm | 15 mm |
| EOW-22 / EOW-22M | 50W | 6600-22000 | 100-150 cm | DC 24V | 22000L/H | 65 mm | 16 mm |
5. Setélan
- Pasang Pompa: Position the wave maker pump unit inside your aquarium. Use the strong magnetic base to secure it to the aquarium glass. Ensure the pump is fully submerged and positioned to create the desired water flow pattern.
- Pamasangan Controller: Install the control box in a waterproof location, away from direct water splashes. It is crucial to keep the controller dry to prevent damage.
- Sambungan Daya: Connect the wave maker pump to the controller, and then connect the controller to the power adapter. The power adapter reduces 220V voltage to a safe 12V/24V low voltage, preventing the risk of electric leakage and ensuring the safety of your aquatic animals.
- Adaptor colokan: Use the appropriate complimentary plug adapter for your region (EU, US, UK, GER, AU, CH PLUG) with the power adapter.
6. Operasi
6.1 Métode kontrol
- Manual Control (EOW-3/5/9/16/22 models): Use the LCD panel on the controller for frequency conversion adjustment.
- WIFI App Control (EOW-3M/5M/9M/16M/22M models): Download the 'Jebao Aqua' app from your mobile app store. The app allows for comprehensive remote control and personalized settings.
6.2 Wave Making Modes
The wave maker offers five distinct wave making modes to simulate various natural water flows:
- M1: Classic Pulse Mode
- M2: PMSM Wave Mode
- M3: Mode Wave acak
- M4: Constant Current Wave Making Mode
- M5: Classical Circulation Mode
6.3 Feeding Function
Activate the feeding function to temporarily pause wave generation, allowing fish to feed undisturbed.
6.4 Auto Frequency Control
For advanced setups, multiple EOW wave makers can be linked wirelessly via the app. A single mobile phone can support up to 32 different devices, allowing for synchronized and complex wave patterns.
6.5 BT Sleep Mode
Devices already connected via Bluetooth (BT) will automatically enter power-saving sleep mode and disconnect from BT if there is no operation within 30 seconds. To exit sleep mode, press any button (except the BT and power buttons) on the device twice in a row. Wait for 5-10 seconds, then open the app to connect to BT successfully.
7. Pangropéa
Regular maintenance is essential to ensure effective operation and extend the service life of your wave maker.
- Ngabersihan rutin: Clean the wave maker regularly to ensure its effective operation.
- Perawatan Kotak Kontrol: If water gets on the control box surface, dry it immediately with a dry cloth to prevent water from entering.
- Pump Body Cleaning: To clean debris from the pump body, open it by rotating the front mesh counter-clockwise to unlock. Remove the turbine blades and clean the pump body and blades with a soft cloth.
- Lingkungan Pamakéan: This product is suitable for indoor use only. The control box and adapter must not be immersed in water to avoid unnecessary losses.
8. Cara ngungkulan
The correct use of the product can prolong its use time and prevent damage. Refer to the following for common issues and error codes:
8.1 Kode Kasalahan
- ER01: Software Over-Current Protection
- ER02: Hardware Over-Current Protection
- ER03: Overheating Protection
- ER04: Under Voltage panyalindungan
- ER05: Over Voltage panyalindungan
- ER06: Rotation-Clogging Protection
If any of these error codes appear, disconnect power, inspect the pump for obstructions or damage, and ensure proper voltage supply before restarting.
8.2 General Notes & Issues
- To ensure product performance, running the pump without water is prohibited.
- Install the control box in a waterproof location and prevent water splashes.
- When installing magnetic suction cups, handle with care and place the two halves on the fish tank opposite each other horizontally to secure and prevent damage to the fish tank.
- Non-professionals are prohibited from opening the control box or adapter to avoid damage.
- Do not allow children or inexperienced persons to operate the product without supervision.
- If the device is powered off, please connect it to a mobile phone to ensure the timing mode runs accurately.
- When using for the first time or after a long period of inactivity, use it continuously for at least 24 hours after powering on to ensure the internal clock battery is charged.
- If your remote control is not working, check the battery, ensure it's paired correctly, and that there are no obstructions between the remote and the controller. If issues persist, contact customer service.
9. Tips pamaké
- This wave maker is suitable for use in both fish tanks and aquariums to improve water circulation and overall aquatic health.
- For optimal performance and longevity, ensure the wave maker is cleaned regularly, especially the impeller, to prevent clogging.
- Always keep the controller and power adapter dry. Avoid any contact with water.
- If you experience connectivity issues with WiFi or Bluetooth, particularly in regions like Japan, please contact customer service for assistance.
10. Jaminan & Dukungan
Jebao is committed to providing high-quality products and excellent customer service.
- Pangembalian 7 Dinten: Ngarasakeun 7 dinten kanggo ngabalikeun barang upami aya masalah kualitas anu dipendakan.
- Garansi 1 Taun: All products come with a 1-year warranty from the store.
- Service Help: If you require assistance or have any questions, please contact our customer service team.
