Electric Vegetable Dicer and Slicer Machine GJ807

1. Parentah Kasalametan penting

Please read all safety instructions carefully before operating the appliance. Failure to follow these instructions may result in injury or damage to the appliance.

PERHATOSAN

1. The blades are very sharp. Handle with extreme care when cleaning or installing to avoid cutting your hands. Keep the machine and knives out of reach of children and persons with mental disabilities after use.
2. Always turn off the switch and unplug the power cord before opening the aluminum alloy lid. Wait until all moving parts have completely stopped.
3. Do not insert hard food into the feeding port. Never push food directly into the feeding port with your hand while the machine is running. Always use the provided food pusher to prevent accidents.
4. Ensure the machine is powered off and unplugged before cleaning, disassembling, or assembling any parts. Do not immerse the main unit in water as it contains the motor.
5. Use a reliable grounded 3-wire socket (not included) and a reliable leakage protection switch to ensure electrical safety.
6. The dicing blade mesh support frame is located at the bottom of the foam packaging.
7. This product is designed for cutting hard vegetables and fruits. It is not suitable for soft foods.
8. Refer to the English Manual for detailed instructions and safety information.

Image: Warning label on the machine's feeding port, detailing safety precautions for blade handling, power, and food insertion.

2. Produk Langkungview

The Electric Vegetable Dicer and Slicer Machine GJ807 is a high-performance food processor crafted from premium die-casting aluminum and stainless steel. It is designed to efficiently cut various hard vegetables and fruits into dice, strips, or slices, making food preparation easier and faster for both home and commercial use.

Fitur konci:

• Konstruksi awét: Made of high-quality stainless steel and die-casting aluminum for extended service life.
• motong serbaguna: Equipped with 5 types of blades to produce dice, strips, and slices (1-3mm) or shreds (2-3mm).
• Efisiensi Tinggi: Features a large feeder (9.1*2.6-inch) and a production capacity of 396.83 lbs/h.
• Motor anu kuat: 200W pure copper DC motor operates at 140rpm with low noise.
• Operasi gampang: Simple on/off switch for straightforward use.
• Gampang pikeun ngabersihan: Smooth surfaces and a detachable design facilitate quick cleaning.

komponén:

• Main Food Processor Unit
• Dahareun Pusher
• Slicing Blades (various thicknesses)
• Shredding Blades (various thicknesses)
• Dicing Knife Holder
• Dicing Knife Nets (grids)
• Rengkuh (6mm)
• Kabel listrik
• Manual pamaké

Image: All components of the Food Processor GJ807 laid out, including the main unit, food pusher, various blades, wrench, and manual.

3. Parentah Setup

Before first use, ensure all packaging materials are removed and the unit is clean. Place the food processor on a stable, flat surface.

Pamasangan Blade:

1. Ensure the machine is unplugged and powered off.
2. Open the aluminum alloy lip by releasing the safety snaps on both sides.
3. Pikeun ngiris/ngacang: Place the desired slicing or shredding blade onto the central shaft, ensuring it sits securely.
4. Pikeun Dadu:
   1. Install the food pusher into its designated slot.
   2. Place the dicing knife holder onto the central shaft.
   3. Insert the required dicing knife net into the holder.
   4. Using the provided 6mm spanner, tighten the dicing knife counterclockwise to secure it.
5. Close the aluminum alloy lip and secure it with the spring buckles until they click into place.

Image: Diagram illustrating the three steps for dicing blade installation.

Image: Hand operating the safety latch.

4. Parentah Operasi

Once the desired blade is installed and the lid is securely closed, you can begin operation.

1. Plug the machine into a suitable grounded power outlet.
2. Press the green ON/OFF switch to start the machine. The motor will begin to run.
3. Carefully feed pre-cut vegetables or fruits into the feeding port. Ensure pieces are appropriately sized for the feeder (9.1*2.6 inches).
4. Use the food pusher to guide the food down towards the rotating blade. Never use your hands.
5. The processed food will be discharged automatically through the chute.
6. When finished, press the ON/OFF switch to turn off the machine, then unplug it from the power outlet.

Examples pamakéan:

Image: Slicing carrots.

Image: Shredding carrots.

Image: Dicing ham.

Image: Slicing cucumbers.

5. Pangropéa jeung beberesih

Beberesih sareng pangropéa anu rutin bakal mastikeun umur panjang sareng kinerja anu optimal tina prosesor dahareun anjeun.

1. Pareum sareng Cabut colokan: Always turn off the machine and unplug it from the power outlet before cleaning.
2. Pembongkaran: Carefully open the lid and remove the installed blade or dicing assembly.
3. Blades beberesih: The blades are extremely sharp. Use a brush or a soft cloth to remove food residue. Rinse under running water. Handle with care to avoid injury.
4. Cleaning Main Unit: Ngusap bagian luar unit utama nganggo iklanamp, soft cloth. Do NOT immerse the main unit in water.
5. Pangeringan: Ensure all parts are thoroughly dried before reassembling or storing.
6. Panyimpenan: Store the machine and its accessories in a safe, dry place, out of reach of children.

6. Cara ngungkulan

If you encounter any issues with your food processor, please refer to the following common solutions:

• Mesin teu hurung: Ensure the power cord is securely plugged into a working outlet and the ON/OFF switch is pressed. Check for any tripped circuit breakers.
• Food is not cutting properly: Verify that the correct blade is installed and secured. Ensure the food pieces are not too large or too hard for the machine. Do not overload the feeding port.
• Lid does not close: Check that all internal components (blades, holders) are correctly seated and aligned. Ensure the safety snaps are fully engaged.
• Sora anu teu biasa nalika operasi: Turn off the machine immediately and unplug it. Check for any foreign objects or misaligned parts. If the noise persists after checking, contact customer support.

7. Spésifikasi

Gambar: Diménsi produk.

8. Tips pamaké

• For best results, ensure vegetables and fruits are firm and fresh.
• Pre-cut larger items to fit comfortably into the feeding port to prevent jamming.
• Always use the food pusher to maintain consistent pressure and ensure even cuts.
• Experiment with different blades to find the perfect cut for your recipes.
• Clean the machine immediately after use to prevent food residue from drying and becoming difficult to remove.

9. Garansi jeung Rojongan

We aim to provide quality products and services. If you have any problems or questions regarding your Electric Vegetable Dicer and Slicer Machine GJ807, please feel free to contact customer service. We will reply and solve the problem for you as soon as possible.