1. Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of the Dooya DM45M-50/12 Manual Tubular Motor. This motor is designed for motorized rolling shutter doors and awnings, offering both manual and electric control capabilities. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image 1.1: Dooya DM45M-50/12 Manual Tubular Motor with power cable.
2. Daptar bungkusan
Saatos ngabongkar bungkusan, mangga pariksa yén sadaya komponén ieu kalebet:
- DM45M 50/12 Tubular Motor: 1 unit
- Adjust Rod: 1 unit
- Bracket: 1 unit
- Crown: 1 unit (Type depends on your tube)
- Drive Adapter: 1 unit (Type depends on your tube)
Catetan: The specific type of Crown and Drive Adapter provided will match the tube type you have. The tube itself is not included and must be ordered separately.
Image 2.1: Contents of the DM45M-50/12 package, including motor, adjust rod, bracket, crown, and drive adapter.
3. Spésifikasi
| Atribut | Nilai |
|---|---|
| Nomer modél | DM45M-50/12 |
| Ngaran produk | Dooya DM45M-50/12 Manual & Electric Tubular motor |
| Rolling Speed / Rotating Speed | 12 r / mnt |
| Voltage | 230V |
| Gawé Voltage | 220/230V, 50/60Hz |
| Wattage | 205W |
| Asalna | Daratan Cina |
| Sertifikasi | CE |
| Batré Kaasup | No |
| Kimia anu prihatin tinggi | Euweuh |
| Pakét Panjang | 65 cm |
| Bungkusan Lebar | 12 cm |
| pakét Jangkungna | 12 cm |
| Beurat pakét | 4.2 kg |
Image 3.1: Motor label displaying detailed specifications and the internal wiring diagram.
Image 3.2: Measurement of the motor's top axis, which is approximately 15-16mm.
4. Pamasangan
4.1 Cék Pra-instalasi
- Ensure the tube for your rolling shutter or awning is compatible with the motor (e.g., 80mm or 114mm tube).
- Verify the dimensions of the motor's top axis (approx. 15-16mm) for proper fitment.
Image 4.1: Diagram illustrating the motor's compatibility with 80mm/114mm tubes.
4.2 Motor Assembly into Tube
- Insert the motor into the designated tube.
- Ensure the crown and drive adapter are correctly positioned on the motor and within the tube.
- Drill a hole for the fixed tail plug.
- Drill a hole for the drive adapter.
- Align the wheel centerline.
Perhatosan penting:
- Do NOT pierce the crown when drilling.
- The motor part is prohibited from nailing.
Image 4.2: Step-by-step insertion of the motor into the tubular housing.
Image 4.3: Visual warning to avoid piercing the crown during motor installation.
Image 4.4: Illustration of drilling the tube for the fixed tail plug.
Image 4.5: Illustration of drilling the tube for the drive adapter.
Image 4.6: Diagram showing alignment of the motor within the tube and a warning against nailing the motor part.
4.3 Kabel Listrik
Refer to the wiring diagram on the motor label (Image 3.1) for correct electrical connections. Ensure all connections are secure and comply with local electrical codes.
- Umum: Kawat biru
- Giliran: Kawat coklat
- Balikkeun: Kawat hideung
- taneuh: Kawat konéng/héjo
Awas: Do not open the motor cover, otherwise the warranty will be void.
Gambar 4.7: Ngabeledug view showing the motor, tube, and mounting brackets for a rolling shutter system.
5. Operasi
5.1 Nyetél Wates
The motor requires setting of upper and lower limits to define the travel range of the shutter or awning. Use the provided Adjust Rod for this procedure.
- Up Limit Setting: Adjust the mechanism to set the desired upper stopping point.
- Down Limit Setting: Adjust the mechanism to set the desired lower stopping point.
Image 5.1: Diagram showing the process for setting the motor's upper travel limit.
Image 5.2: Diagram showing the process for setting the motor's lower travel limit.
5.2 Electric Control
For electric control, an external control system (e.g., remote control, wall switch) is required. This system needs to be purchased separately and connected according to its own instructions and the motor's wiring diagram.
Image 5.3: Illustration of an external control system connected to the motor (control system sold separately).
5.3 Manual Control (Power Off)
In case of power failure, the motor supports manual operation using a crank or similar mechanism. This allows you to open or close the shutter/awning even without electricity.
Image 5.4: Depiction of manual operation using a crank handle during a power outage.
6. Pangropéa
- Regularly inspect the motor and associated components for any signs of wear, damage, or loose connections.
- Keep the motor and surrounding area clean and free from dust and debris.
- Do not attempt to lubricate internal motor parts unless specifically instructed by the manufacturer.
- If any issues arise, consult the troubleshooting section or contact customer support.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Motor does not respond to electric control. | No power, incorrect wiring, faulty control system, or motor malfunction. | Check power supply. Verify wiring connections against diagram. Test control system. If problem persists, contact support. |
| Shutter/Awning stops at incorrect positions. | Limit settings are incorrect or have shifted. | Re-adjust the upper and lower limit settings using the Adjust Rod as described in Section 5.1. |
| Motor nyieun sora anu teu biasa. | Obstruction in the tube, worn components, or internal motor issue. | Inspect for obstructions. If none, discontinue use and contact customer support. |
8. Tips pamaké
- Kontrol Éksternal: Remember that the electric control system (e.g., remote control) is a separate purchase. Ensure you acquire a compatible system for full electric functionality.
- Kasaluyuan tabung: Always double-check the diameter of your rolling shutter or awning tube to ensure it matches the motor's requirements (e.g., 80mm or 114mm).
9. Garansi jeung Rojongan
Produk ieu disertipikasi CE, nunjukkeun patuh kana sarat kaamanan, kaséhatan, sareng perlindungan lingkungan Éropa.
For any technical assistance, warranty claims, or further inquiries, please contact the seller or authorized service center. Do not attempt to repair the motor yourself, as this may void the warranty and pose safety risks.
