Thermalright AE240 ARGB All-in-One Water Cooling Radiator User Manual

1. Bubuka

Thank you for choosing the Thermalright AE240 ARGB All-in-One Water Cooling Radiator. This high-performance CPU liquid cooler is designed to provide efficient heat dissipation for your processor while adding vibrant ARGB lighting to your system. This manual will guide you through the installation, operation, and maintenance of your new cooler to ensure optimal performance and longevity.

The AE240 features a 240mm radiator, two ARGB fans, and a pump with an ARGB-lit top, all designed for seamless integration and aesthetic appeal.

2. Pancegahan Kasalametan

• Always disconnect power from your PC before installation or maintenance.
• Nanganan komponén kalayan ati-ati pikeun nyegah karusakan.
• Mastikeun grounding ditangtoskeun pikeun nyegah ngurangan éléktrostatik.
• Do not open the pump or radiator as it contains liquid coolant.
• Jauhkeun tina jangkauan barudak.
• Refer to your motherboard manual for specific header locations and voltage syarat.

3. Eusi Paket

Pastikeun yén sadaya item aya dina pakét anjeun:

• Thermalright AE240 All-in-One CPU Cooler (Radiator, Pump, and pre-installed fans)
• Braket Pemasangan pikeun soket Intel sareng AMD
• Backplates for compatible sockets
• Screws and standoffs for installation
• Témpél termal
• ARGB 3-pin cable for cold head/fan light effect interface
• Manual pamaké

4. Spésifikasi

5. Pitunjuk Instalasi

Before you begin, ensure your PC is powered off and unplugged. Refer to your motherboard and PC case manuals for specific instructions on component placement and cable routing.

5.1. Siapkeun CPU sareng Motherboard

1. CPU beresih: If replacing an existing cooler, carefully remove the old cooler and clean any residual thermal paste from the CPU surface using isopropyl alcohol.
2. Larapkeun Témpél Thermal: Apply a small, pea-sized amount of thermal paste to the center of your CPU's Integrated Heat Spreader (IHS).

5.2. Masangkeun Hardware

The AE240 supports a wide range of Intel and AMD sockets. Select the appropriate backplate and mounting brackets for your CPU socket.

For Intel Sockets (LGA 115X/1200/1700/2011/2066):

1. Attach the correct Intel backplate to the rear of your motherboard, aligning the holes.
2. Secure the standoffs through the motherboard holes into the backplate.
3. Attach the Intel mounting brackets to the pump unit.

Pikeun Soket AMD (AM4/AM5):

1. Remove the plastic retention clips from the stock AMD backplate (if present), but keep the stock backplate.
2. Attach the AMD mounting brackets to the pump unit.
3. Secure the standoffs to the motherboard's existing backplate.

5.3. Pasang Radiator sareng Kipas

The fans are pre-installed on the radiator for convenience.

1. Determine the best mounting location for the 240mm radiator in your PC case (e.g., top, front).
2. Secure the radiator to your case using the provided screws. Ensure proper airflow direction (typically intake or exhaust depending on case configuration).

5.4. Pasang Unit Pompa

1. Carefully place the pump unit onto the CPU, aligning the mounting brackets with the standoffs.
2. Amankeun unit pompa nganggo sekrup jempol atanapi kacang anu disayogikeun, kencangkeun dina pola diagonal dugi ka pas. Ulah overighten.

5.5. Sambungkeun Kabel

1. Power Pump: Connect the pump's 3-pin power cable to the motherboard's dedicated AIO_PUMP or CPU_OPT header. If neither is available, use a SYS_FAN header and ensure it's set to run at full speed in the BIOS.
2. Daya Kipas: Connect the 4-pin PWM fan cables (from the pre-installed fans) to the motherboard's CPU_FAN header or a fan hub.
3. Pencahayaan ARGB: Connect the 5V-3pin ARGB cables from both the fans and the pump to a compatible 5V-3pin ARGB header on your motherboard or an ARGB controller. Ensure correct pin alignment to avoid damage.

6. Operasi

6.1. Daya Awal Hurung

After installation, double-check all connections. Power on your PC. The fans and pump should start operating, and the ARGB lighting should illuminate.

6.2. Kontrol Lampu ARGB

The AE240 features Addressable RGB (A-RGB) lighting on both the fans and the pump head. This allows for synchronized lighting effects with compatible motherboards or external ARGB controllers.

• Parangkat Lunak motherboard: If connected to a 5V-3pin ARGB header on your motherboard, you can control the lighting effects using your motherboard manufacturer's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
• Controller éksternal: If your motherboard lacks an ARGB header, you may use an external ARGB controller (not included) to manage lighting effects.

7. Pangropéa

Regular maintenance helps ensure optimal performance and extends the lifespan of your cooler.

• beberesih lebu: Bersihkeun lebu tina sirip radiator sareng bilah kipas sacara berkala nganggo udara anu dikomprés atanapi sikat lemes. Pastikeun kipas henteu muter nalika beberesih.
• Pariksa Pipa: Inspect the tubing for any signs of kinks, leaks, or damage.
• Pariksa pompa: Listen for any unusual noises from the pump, which could indicate an issue.
• Témpél termal: While not frequently required for AIOs, if you ever remove the pump from the CPU, you must clean and reapply thermal paste before reinstallation.

8. Cara ngungkulan

8.1. No Power to Fans/Pump

• Ensure all power cables (3-pin for pump, 4-pin for fans) are securely connected to the correct headers on the motherboard.
• Check BIOS settings to ensure fan headers are enabled and configured correctly (e.g., not set to 0 RPM).

8.2. Lampu ARGB Teu Jalan

• Verify that the 5V-3pin ARGB cables are correctly connected to a compatible ARGB header on your motherboard or controller. Ensure the arrow on the connector aligns with the +5V pin on the header.
• Check your motherboard's RGB software or external controller settings.
• Ensure the ARGB header on your motherboard is enabled in the BIOS.

8.3. Suhu CPU anu Luhur

• Ensure the pump is running. You should feel a slight vibration or hear a low hum.
• Verify that the pump unit is securely mounted to the CPU and making good contact.
• Pariksa lamun némpelkeun termal ieu dilarapkeun leres tur merata.
• Ensure fans are spinning and oriented correctly for optimal airflow through the radiator.
• Ngabersihan sagala akumulasi lebu dina sirip radiator.

8.4. Noises mahiwal

• Ngagebrét/Ngabuleud: This can be normal during initial startup as air settles. If it persists, gently tilt your PC case to help trapped air move to the radiator.
• Bising kipas: Check for obstructions or loose fan blades. Ensure fan screws are tight.
• Noise pompa: If the pump makes a loud grinding or whining noise, it may indicate an issue. Ensure it's receiving adequate power.

9. Tips pamaké

• Pariksa kasaluyuan: Always verify your motherboard's CPU socket type (e.g., LGA1700, AM5) and case clearance for a 240mm radiator before purchasing jeung masang.
• Manajemén Kabel: Take time to route cables neatly for better airflow and aesthetics.
• Setélan BIOS: Configure your motherboard's BIOS to control fan speeds (PWM) based on CPU temperature for optimal cooling and noise levels. Ensure the pump header is set to run at 100% speed.
• ARGB Software: Experiment with your motherboard's ARGB software to find your preferred lighting effects and synchronization.

10. Garansi jeung Rojongan

Thermalright provides a 3-year quality assurance for the AE240 All-in-One Water Cooling Radiator. For technical support, warranty claims, or further assistance, please contact Thermalright customer service through their official channels.

Punten mertahankeun bukti pameseran anjeun pikeun tujuan garansi.