Ditec GOL4 Compatible Garage Door Remote Control User Manual

Bubuka

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your new Scimagic-RC Ditec GOL4 compatible garage door remote control. This remote is designed to work with DITEC rolling code systems operating at 433.92MHz.

Kasaluyuan

This remote control is 100% compatible with the following DITEC rolling code models:

• DITEC GOL4
• DITEC BIXLG4
• DITEC BIXLP2
• DITEC BIXLS2
• DITEC Entrematic ZEN 2
• DITEC Entrematic ZEN 4
• DITEC Entrematic ZEN2W
• DITEC Entrematic ZEN4W

IMPORTANT NOTE: This remote is NOT compatible with DITEC GOL4C (fixed code) models. Please ensure your original remote is a rolling code type.

spésifikasi

Disetél

Pamasangan batré

The remote control comes with a CR2032 battery pre-installed. If you need to replace it:

1. Teangan tempat panutup kompartemen batré dina tonggong remote.
2. Buka panutupna kalawan ati-ati.
3. Leupaskeun batré CR2032 heubeul.
4. Insert a new 3V CR2032 battery, ensuring the positive (+) side is facing up.
5. Tutup panutup kompartemen batré aman.

Pemrograman Remote Control

To program your new remote control to your DITEC gate or garage door opener, follow these steps. This process is similar to programming original DITEC transmitter remotes. Refer to your receiver's user manual for specific details if needed.

1. Access the Receiver: Open the control box of your gate or garage door opener and locate the receiver board. Ensure that jumper JR6 on the receiver board is in the 'on' position.
2. Mimitian Pemrograman: Press and hold the black 'PRG' (Program) button on the receiver board for approximately 5 seconds.
3. Program New Remote: While the receiver is in programming mode, press and hold the button on your new remote control that you wish to activate the device. Hold this button for approximately 5 seconds.
4. Uji sareng Reset: Wait for 10 seconds for the receiver to reset. After this, test the new remote control to ensure it operates correctly.

Parentah Operasi

Once programmed, your remote control can be used to operate compatible DITEC systems. Simply press the programmed button on the remote to activate the garage door, gate, alarm, automatic door, or roller shutter.

Pangropéa

The remote control requires minimal maintenance. The primary maintenance task is battery replacement when the remote's range decreases or it stops responding. Refer to the 'Battery Installation' section for instructions on replacing the CR2032 battery.

Pamérésan masalah

Jauh Teu Ngabales

• Pariksa batré: Pastikeun batréna leres dipasang sareng gaduh muatan anu cekap. Ganti lamun perlu.
• Program ulang: Attempt to re-program the remote control following the steps in the 'Setup' section.
• Check Jumper JR6: Verify that jumper JR6 on the receiver board is in the 'on' position.
• rentang: Ensure you are within the effective operating range (20-100m in open area). Obstacles can reduce this range.

Incompatibility Issues

If your remote is not working, double-check that your original DITEC remote uses a rolling code and is one of the compatible models listed. This remote is not compatible with DITEC GOL4C (fixed code) models. The GOL4 (rolling code) typically has a different LED indicator color than the GOL4C (fixed code).

Clearing All Stored Remotes (Reset Codes)

To clear all previously programmed remote controls from your DITEC receiver, effectively resetting it:

1. Access the receiver board in your control box.
2. Press and hold the 'PRG' (Program) button on the receiver board for a longer duration, typically 10-15 seconds, until the indicator light on the receiver changes or turns off.
3. Release the button. All previously programmed remotes should now be cleared. You will need to re-program any remotes you wish to use.

Garansi sareng Rojongan

Your purchase includes the following services:

• jasa mulang: Ngarasakeun 7 dinten kanggo ngabalikeun barang upami aya masalah kualitas anu dipendakan.
• Waktu ngolah: Most items are shipped out within 24 working hours (excluding holidays).
• Pitulung balanja: All emails for support will be answered within 24 hours.
• Pulangan Gratis: bebas mulih sadia dina 90 poé pameseran.
• Garansi pangiriman gancang: Includes a $1.00 coupon code if delivery is delayed, a refund if the package is lost, a refund if items are damaged, and a refund if no delivery occurs within 30 days.
• Kaamanan & Privasi: Rincian pribadi anjeun ditangtayungan sareng henteu dibagikeun ka pihak katilu tanpa idin anjeun.

For further assistance, please contact customer support through the platform where you made your purchase.