1Mii B06S+ Bluetooth 5.2 Receiver User Manual

1. Bubuka

The 1Mii B06S+ is a high-fidelity Bluetooth 5.2 audio receiver designed to modernize your existing home stereo systems, powered speakers, amplifiers, or AV receivers by enabling wireless audio streaming from your smartphone, tablet, or computer. It supports advanced audio codecs like LDAC, aptX HD, and aptX Low Latency for an exceptional listening experience. The device features an LED light circle design that indicates the active decoding format, ensuring you're always aware of your audio quality.

2. Eusi Paket

Mangga cék kotak pikeun item di handap ieu:

• 1 x 1Mii B06S+ Bluetooth Audio Receiver
• 1 x adaptor kakuatan
• 1 x Kabel Daya DC 5V
• 1 x RCA Kabel
• 1 x Manual Pamaké

3. Setup Guide

Follow these steps to set up your 1Mii B06S+ Bluetooth Receiver:

1. Power and Audio Connection:
   Plug the B06S+ into an electrical outlet using the provided power adapter and DC 5V power cable. Connect the B06S+ to your powered speakers, amplifier, or AV receiver using either the 3.5mm AUX cable or the RCA cables. Once powered, the device will automatically enter pairing mode, indicated by a red and blue double flashing LED light.

   

2. Masangkeun Bluetooth:
   Turn on the Bluetooth function on your smartphone, tablet, or computer. Milarian pikeun "B06S+" in the list of available Bluetooth devices and select it to pair.
3. Puteran nirkabel:
   Once successfully connected, you can wirelessly play your favorite music through your audio system.

4. Parentah Operasi

• Kontrol volume: Short press the "+" button to increase volume, and the "-" button to decrease volume.
• Kontrol lagu: Long press the "+" button to skip to the next song, and the "-" button to go back to the previous song.
• Puter / Reureuh: Press the central "Bluetooth/Pause" button to play or pause music.
• Ngasupkeun Mode Papasangan: Press the "Bluetooth/Pause" button for 2 seconds. The LED light will flash red and blue, indicating it's in pairing mode.
• Resetting Paired Devices: To clear all previously paired devices, press and hold the "Bluetooth/Pause" button for 10 seconds. The purple indicator light will flash three times quickly, and then the device will auto-enter pairing mode.
• Indikator LED: The LED light circle on the device indicates the active audio decoding format. The colors correspond to different codecs:
  • SBC/AAC
  • aptX
  • aptX-LL (Low Latency)
  • aptX-HD (High Definition)
  • LDAC

  

5. Pangropéa

To ensure the longevity and optimal performance of your 1Mii B06S+ receiver, please follow these maintenance guidelines:

• Jaga alat tetep bersih ku cara ngusap ku kaén anu lembut sareng garing.
• Hindarkeun ngalaan alat ka suhu anu ekstrim, sinar panonpoé langsung, atanapi kalembaban anu luhur.
• Ulah nyobian ngabongkar atanapi ngarobih alat, sabab ieu bakal ngabatalkeun garansi.
• Pastikeun ventilasi ditangtoskeun sabudeureun alat salila operasi.

6. Cara ngungkulan

• Henteu aya kakuatan: Pastikeun adaptor daya dipasang pageuh kana alat sareng stop kontak anu tiasa dianggo.
• Teu Bisa Dipasangkeun:
  1. Make sure the B06S+ is in pairing mode (LED flashing red and blue).
  2. Clear previous pairings by pressing and holding the "Bluetooth/Pause" button for 10 seconds. The purple indicator light will flash three times quickly, and then it will re-enter pairing mode.
  3. Ensure your source device's Bluetooth is turned on and discoverable.
• Henteu aya sora:
  1. Check all audio cable connections (3.5mm or RCA) between the B06S+ and your audio system.
  2. Pastikeun sumber input anu leres dipilih dina anjeun amplifier atanapi speaker Powered.
  3. Verify that the volume levels on both the B06S+ and your source device/speakers are not set to minimum or muted.
• Poor Sound Quality or Intermittent Connection:
  1. Ensure your source device is within the effective operating range (50-100 ft / 15-30m). Walls and other obstacles can reduce this range.
  2. Reduce interference from other wireless devices (e.g., Wi-Fi routers, microwaves) by moving them further away.
  3. For optimal quality, ensure your source device supports the desired audio codec (LDAC, aptX HD).
• LED Indicator not showing purple for LDAC: This indicates that your connected source device may not support LDAC decoding. The B06S+ will automatically use the best available codec supported by both devices.

7. Spésifikasi

8. Tips pamaké

• You can control all playback functions (volume, track, play/pause) directly from your smartphone, in addition to using the buttons on the B06S+.
• The effective Bluetooth range can be significantly affected by physical obstacles like walls and interference from other wireless devices (e.g., Wi-Fi routers). For best performance, try to minimize these factors.
• If the LED indicator does not show purple for LDAC, it means your connected device does not support the LDAC codec. The receiver will automatically use the next best available codec.

9. Jaminan & Dukungan

Your 1Mii B06S+ Bluetooth Receiver comes with a 1-year warranty from the date of purchase. For any inquiries or support needs, please contact our customer service team. We aim to answer all emails within 24 hours.