Manual Instruksi Saklar Tirai Pérak LoraTap SC400ZB-EU-SIL-4PACK Tuya Smart Life ZigBee 3.0

Bubuka

The LoraTap SC400ZB-EU-SIL-4PACK is a smart ZigBee 3.0 curtain blind switch designed to automate and control your roller shutters and electric motors. This switch integrates seamlessly with the Tuya Smart Life ecosystem, allowing for convenient control via smartphone applications, voice commands through Amazon Alexa and Google Home, and scheduled automations. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and a smart living experience.

Produk Leuwihview: LoraTap ZigBee Curtain Switches

Catetan penting Sateuacan Instalasi

• A Tuya ZigBee Hub is required for the functionality of these switches. Ensure you have a compatible Tuya ZigBee Hub. This switch is not compatible with ZigBee Hubs from other brands.
• At least 3 wires are required for your motor: Live Wire 1, Live Wire 2 (for OPEN and CLOSE), and a Neutral wire. If your motor does not have these, the switch cannot be connected.
• The switch is compatible with any electric shutter motor with 100-250 VAC voltage input and a maximum load of 600W.
• The neutral wire is mandatory for installation.
• This is a ZigBee touch switch only and does not support RF remote control.

A Tuya ZigBee Hub is essential for operation.

spésifikasi

Eusi pakét

• LoraTap Tuya ZigBee Curtain Switch (quantity depends on your option)
• Terminal for Neutral Wiring
• Blue Neutral Cable
• Screw Kit
• Guide pamaké

Setup & Pamasangan

Kasalametan munggaran: Always turn off the main power supply before performing any electrical work to prevent electric shock.

1. Nyiapkeun pikeun Wiring:
   • Carefully open the switch panel. Use a flathead screwdriver to gently pry open the panel from the edges to avoid scratching or breaking it.
   • Ensure your motor has 4 wires: Blue Wire (Neutral), Brown Wire (Live 1), Black Wire (Live 2), and Green/Yellow Wire (Earth).
   

   Diagram Wiring Motor

2. Connect the Wires to the Switch:
   • Input L (Live Wire): Connect the Red/Brown/Black Live Wire from your AC power supply to the 'Input L' terminal on the switch.
   • Input N (Neutral Wire): Connect the Blue Neutral Wire from your AC power supply to the 'Input N' terminal on the switch.
   • Output L1: Connect the Brown Wire from the motor to the 'Output L1' terminal.
   • Output L2: Connect the Black Wire from the motor to the 'Output L2' terminal.
   • Output N (Neutral Wire): Connect the Blue Neutral Wire from the motor to the 'Output N' terminal.
   • Kawat bumi: The switch does not have a terminal for the earth wire (Green/Yellow Wire). This wire should be safely terminated according to local electrical codes, but it is not connected to the switch itself.
   • Tip: When connecting neutral wires, ensure both the input neutral wire (from AC power) and the output neutral wire (from the motor) are securely placed into the 'N' position on the switch terminal block.
   

   Switch Wiring Diagram and Dimensions (86mm x 86mm x 35mm)

3. Pasang Pelat Tukang: Fix the back plate of the switch securely to the wall using the provided screws.
4. Pasangkeun Panelna: Once wiring is complete and the back plate is mounted, carefully press the glass panel back onto the back plate until it clicks into place. Ensure the power is OFF before attaching the glass panel to prevent malfunction.

The switch is designed to fit standard junction boxes in various countries. Refer to the diagram below for compatibility.

Junction Box Compatibility (60mm diameter)

Parentah Operasi

1. Pairing with Tuya ZigBee Hub

After physical installation, you need to pair the switch with your Tuya ZigBee Hub using the Smart Life or Tuya app.

Video: ZigBee Curtain Switch App Pairing and Control Demo

1. Pastikeun Tuya ZigBee Hub anjeun dihurungkeun sareng nyambung ka jaringan anjeun.
2. Open the Smart Life or Tuya app on your smartphone.
3. Navigate to your Smart Gateway (ZigBee Hub) in the app.
4. Tap 'Add Device' or 'Add Subdevice'.
5. The app will prompt you to ensure the device is in pairing mode (LED blinking). If not, press and hold the middle button on the switch panel for 5 seconds until the indicator light flashes.
6. The app will discover nearby devices. Once found, add the ZigBee Curtain Switch.
7. Follow the on-screen prompts to complete the pairing process and name your switch.

2. App Control

Control your curtains from anywhere using the Smart Life or Tuya app.

• Buka/Tutup: Ketok tombol 'Buka' atanapi 'Tutup' dina antarmuka aplikasi.
• Persentage Kontrol: Use the slider in the app to set the curtain to a specific open or closed percentage (contona, 50% kabuka).
• Pariksa Status: View the current open/closed status of your shutters from anywhere.

App Control for Percentage Open/Close

Remote Control and Status Check via App

3. Kontrol sora

Integrasikeun sareng Amazon Alexa atanapi Google Home pikeun kontrol tanpa nganggo leungeun.

• Link your Smart Life/Tuya account to your Alexa or Google Home app.
• Anggo paréntah sapertos:
  • "Alexa, bukakeun gordenna."
  • "Hei Google, tutupkeun gordenna."
  • "Alexa, set the curtain to 50%."

Kontrol Sora sareng Amazon Alexa sareng Google Home

4. Scheduling and Automation

Automate your curtains based on time or environmental conditions.

• Schedule & Timing: Set specific times for your curtains to open or close automatically.
• Otomatis Panonpoé Panonpoé / Panonpoé Tilelep: Configure the app to open curtains at sunrise and close them at sunset.

Sunrise/Sunset Automation Setup in App

Schedule & Timing Settings in App

5. Group Function and Device Sharing

• Kontrol Grup: Create groups in the app to control multiple curtain switches simultaneously (e.g., "Living Room Blinds").
• Bagikeun alat: Share control of your smart switches with family members through the app.

Group Function and Device Sharing

6. Modeu wengi

• The switch features no constant light, making it ideal for bedrooms and ensuring undisturbed sleep. You can adjust light modes within the app if desired.

No Light Always ON Feature for Better Sleep

Tuya ZigBee Mesh Network

The LoraTap ZigBee switches operate within a Tuya ZigBee Mesh Network, which enhances reliability and range. Your Tuya ZigBee Hub acts as the central coordinator, and each ZigBee device can act as a repeater, extending the network's reach.

• You can add up to 256 sub-ZigBee devices to your Tuya ZigBee Mesh Network.
• Ensure your ZigBee Hub is always powered on for the network to function correctly.

Tuya ZigBee Mesh Network Overview

Expanded ZigBee Mesh Network with Multiple Switches

Tip pamaké

• Jaringan Stabil: For optimal performance, ensure your Wi-Fi router and ZigBee Hub are centrally located and have a strong, stable connection.
• Apdet Aplikasi Biasa: Keep your Smart Life or Tuya app updated to the latest version for new features and improved stability.
• Kajelasan paréntah sora: When using voice control, speak clearly and ensure your smart speaker (Alexa/Google Home) is within hearing range.
• Kalibrasi: After installation and pairing, perform a full open and close cycle via the app to calibrate the motor's travel limits for accurate percentage kontrol.

Pamérésan masalah

• Pindah teu ngabales: Check if the main power supply is on. Ensure the switch is correctly wired and the ZigBee Hub is online. Try resetting the switch by holding the middle button for 5 seconds until the indicator light flashes, then re-pair.
• App cannot find device: Verify that the switch is in pairing mode (blinking LED). Ensure your phone is connected to the same Wi-Fi network as the ZigBee Hub during pairing.
• Kontrol sora teu jalan: Confirm that your Smart Life/Tuya account is correctly linked to your Amazon Alexa or Google Home account. Check the device name in the smart assistant app and ensure it matches your command.
• Curtain not moving fully: Recalibrate the motor's travel limits through the Smart Life/Tuya app. Ensure there are no physical obstructions.
• Motor humming/not moving: Double-check the motor wiring (Live 1, Live 2, Neutral). Ensure the motor is compatible with the switch's voltage sareng wattage spésifikasi.

Pangropéa

• beberesih: Wipe the switch panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Pembaruan firmware: Periodically check the Smart Life/Tuya app for available firmware updates for your switch to ensure optimal performance and security.
• Kaayaan Lingkungan: Ensure the switch is installed in a dry environment, away from direct moisture or extreme temperatures.

Garansi & Rojongan

For warranty information and technical support, please refer to the official LoraTap websitus atanapi ngahubungan pangecér Anjeun. Simpen resi pameseran anjeun salaku bukti pameseran.

For additional guides and documents, you may refer to the official user manual PDF: LoraTap ZigBee Curtain Switch User Manual (PDF)