1. Bubuka
Thank you for choosing the LoraTap Smart Curtain/Blinds Switch. This device allows you to control your electrical roller shutters, blinds, or curtains through multiple methods: direct touch, a dedicated RF remote control, a smartphone application (Tuya Smart or Smart Life), and voice commands via smart assistants like Amazon Alexa and Google Home. This manual provides detailed instructions for installation, setup, operation, and troubleshooting to ensure optimal performance and safety.
2. Émbaran Kasalametan penting
WARNING: Electrical installation should only be performed by a qualified electrician. Ensure power is disconnected at the circuit breaker before beginning any wiring.
- This device is designed for use with 4-wire AC motors (Blue Wire, Brown Wire, Black Wire, Green/Yellow Wire). It is NOT compatible with DC motors.
- Masukan Voltage: 100-250 VAC, 50/60Hz. Output Voltage (Motor Voltage): 100-250 VAC, 50/60Hz.
- Max Load: Below 600W.
- Ulah ngalaan alat ka beueus atawa suhu ekstrim.
- Pastikeun sadaya sambungan kabel aman sareng insulated leres.
3. Eusi Paket
Mangga cék kotak pikeun item di handap ieu:
- 1 x LoraTap 503 Smart Curtain Switch (White)
- 1 x 3-button RF Remote Control
- 1 x Wall Bracket for Remote
- 1 x User Guide (English or Italian)
- 1 x Terminal connector (for neutral lines)
- 1 x Blue wire (for installation)
- 2 x Pamasangan screws
4. Spésifikasi
| Fitur | Rincian |
|---|---|
| Ngaran Brand | LoraTap |
| Nomer modél | SC414WSC-US-V3-WHI |
| Bahan | Plastic (Fireproof ABS) with Glass Touch Panel |
| Pindah Tipe | Toél Hurung/Pareuman Pindah |
| Masukan Voltage | 100-250 VAC, 50/60Hz |
| Kaluaran Voltage | 100-250 VAC, 50/60Hz |
| Daya Max | 600W |
| Protéksi Tanpa kabel | 2.4GHz Wi-Fi (802.11 b/g/n, not support 5GHz Wi-Fi), LoraTap Private RF 868Mhz |
| Ngaran App | Tuya, Smart Life (Free App, Support Android and iOS) |
| Rojongan Control Sora | Imah Google, Amazon Alexa |
| Pindah Diménsi | 120mm x 72mm x 39mm |
| Jinis Batré (Jauh) | Coin Battery CR2032 |
| Sertifikasi | RoHS, CE, RED, EMC |
| Garansi | 1 taun |
5. Pamasangan
Before installation, ensure the main power supply is turned off at the circuit breaker to prevent electrical shock.
5.1 Diagram Wiring
The LoraTap Smart Curtain Switch requires a Neutral Wire, L1, L2, and Earth Wire connections. Refer to the diagram below for proper wiring.
5.2 Instalasi fisik
The switch is designed to fit standard US and Italian junction boxes. Ensure your existing junction box is compatible with the dimensions shown below.
- Pareuman catu daya utama dina pemutus sirkuit anjeun.
- Remove your old switch (if any).
- Connect the wires to the LoraTap Smart Curtain Switch according to the wiring diagram (Figure 3).
- Mount the switch into the wall box using the provided screws.
- Attach the glass touch panel.
- Balikkeun kakuatan dina circuit breaker.
6. Setélan
6.1 App Download and Wi-Fi Pairing
- Download the 'Smart Life' or 'Tuya Smart' app from your smartphone's app store (available for iOS and Android).
- Daptar atanapi lebet kana akun anjeun.
- Dina aplikasi, ketok '+' pikeun nambahkeun alat anyar.
- Follow the in-app instructions to connect the switch to your 2.4GHz Wi-Fi network. (Note: 5GHz Wi-Fi is not supported).
- During the Wi-Fi connection process, the LED on the 'Open' button will be on, indicating it's ready for connection. It will turn off once successfully added to the app.
6.2 Pamasangan Jarak Jauh RF
The included RF remote control is pre-paired with the switch. If you need to re-pair or pair additional remotes:
- Ensure the switch is powered on.
- Refer to the detailed instructions in the provided user guide for specific pairing steps.
- The RF remote has a control range of up to 30 meters.
7. Operasi
7.1 Kontrol Toél
The glass touch panel features three buttons: Open, Pause, and Close. Simply touch the corresponding button to operate your curtains or blinds.
7.2 App Control
Using the Smart Life or Tuya Smart app, you can control your curtains from anywhere with an internet connection (2G, 3G, 4G, or Wi-Fi).
7.3 RF Jauh Control
The 3-button RF remote allows for convenient control of your curtains without needing your phone or voice commands. It can control multiple switches (up to 10) for group control.
7.4 Kontrol sora
Integrate your LoraTap Smart Curtain Switch with Amazon Alexa or Google Home for hands-free operation.
8. Fitur canggih
8.1 Running Time Setting
You can set the switch operation time range from 10 to 120 seconds within the app. This feature is useful for adjusting the full open/close duration based on your shutter's height, eliminating the need for multiple presses.
8.2 Timing Function (Schedules)
Program your smart curtain switch to open or close at specific times using the app's scheduling feature. For example, set your curtains to open at 7:00 AM and close at 7:00 PM daily.
8.3 Group Function and Device Sharing
Create groups within the app to manage multiple curtain switches simultaneously. You can also share control of your devices with family members, allowing everyone in the household to operate the smart curtains.
8.4 No LED Always On
The switch panel is designed without an always-on LED light to avoid disturbing your sleep. The LED on the 'Open' button only illuminates during the initial Wi-Fi connection setup and turns off once connected.
9. Tips pamaké
- Wi-Fi Connection Indicator: If you are having trouble connecting to Wi-Fi, note that the LED on the 'Open' button will be on to indicate it's in pairing mode. It will turn off once successfully connected to the app.
- Kasaluyuan motor: Always double-check that your motor is a 4-wire AC motor before purchasing or installing to ensure compatibility.
- RF Remote Flexibility: You can purchase additional single, 2-channel, or 4-channel RF remotes and pair them flexibly with your RF & WiFi Roller Shutter Switch for expanded control options.
10. Cara ngungkulan
- Pindah teu ngabales: Check if the main power supply is on. Ensure all wiring connections are secure.
- Masalah sambungan aplikasi: Verify your Wi-Fi network is 2.4GHz. Restart your router and the switch, then try pairing again. Ensure your phone is close to the switch during pairing.
- RF jauh teu jalan: Check the CR2032 coin battery in the remote. Re-pair the remote with the switch if necessary (refer to the detailed user guide).
- Curtain motor not moving: Confirm your motor is a 4-wire AC motor. Check the motor's power supply and connections to the switch.
11. Garansi jeung Rojongan
The LoraTap Smart Curtain/Blinds Switch comes with a 1-year warranty from the date of purchase. For technical support, compatibility questions, or any other inquiries, please contact LoraTap Official Store customer service. We are an ISO9001 certified manufacturer, ensuring high-quality products and support.
Video 1: Demonstration of the LoraTap Smart Curtain Switch being controlled via touch, smartphone app, and RF remote.
