Godox TT560II Wireless Camera Flash Speedlite

1. Bubuka

Hatur nuhun pikeun meuliasing the Godox TT560II Wireless Camera Flash Speedlite. This versatile flash unit is designed to be compatible with a wide range of DSLR cameras featuring a standard hot shoe, including Canon, Nikon, Sony, Olympus, Pentax, and Fujifilm. With its built-in wireless signal and included RT Remote Transmitter, the TT560II offers flexible triggering options and powerful illumination for your photography needs. Please read this manual carefully to ensure proper operation and to achieve optimal results.

2. Eusi Paket

Punten parios pikeun mastikeun yén sadaya barang kalebet dina pakét anjeun:

• 1x Godox TT560II Camera Flash
• 1x RT Remote Transmitter
• 1x Kantong Pelindung
• 1x Mini Stand
• 1 x Manual Pamaké

3. Setélan

3.1 Pamasangan batré

1. Buka panutup kompartemen batré anu aya di sisi unit lampu kilat.
2. Insert four (4) AA batteries (alkaline or Ni-MH rechargeable batteries are suitable) according to the polarity indicators inside the compartment.
3. Tutup panutup kompartemen batré aman.

3.2 Masang Lampu Kilat dina Kaméra

1. Pasangkeun hot shoe unit lampu kilat kana dudukan hot shoe kaméra anjeun.
2. Kencengkeun ring konci atawa tuas dina unit lampu kilat pikeun ngamankeunana pageuh kana kaméra.

3.3 RT Remote Transmitter Setup

1. Install batteries into the RT Remote Transmitter (typically 2x AAA, though not explicitly stated, common for such devices).
2. Pasangkeun Pemancar Jarak Jauh RT kana hot shoe kaméra anjeun.
3. Ensure the channel switches (1, 2, 3, 4) on both the flash and the transmitter are set to the same channel for wireless communication.
4. Turn on the transmitter using its ON/OFF switch.

4. Ngoperasikeun Lampu Kilat

4.1 Daya Hurung/Pareuman

Slide the ON/OFF switch on the flash unit to turn it on or off. The power indicator will light up when the flash is on.

4.2 Modeu Flash

The TT560II supports the following flash modes:

• Modeu M (Manual): Allows you to manually set the flash output from 1/128 to full power. Use the '+' and '-' buttons to adjust the power level.
• S1 (Slave 1) Mode: The flash will fire in sync with the first flash detected from a master flash. This mode is suitable for manual flash or TTL flash systems.
• S2 (Slave 2) Mode: The flash will fire in sync with the second flash detected, ignoring the pre-flash from a master TTL flash. This mode is ideal for master TTL flash systems.

4.3 Wireless Triggering

The TT560II features a built-in 433MHz wireless receiver. When used with the RT Remote Transmitter, you can trigger the flash wirelessly. Ensure both the flash and transmitter are set to the same channel (1-16) for successful communication. The working distance for wireless triggering is approximately 15 meters.

4.4 Flash Head Rotation

The flash head can be rotated to achieve various lighting angles:

• Sudut Rotasi Vertikal: 0-90 darajat
• Horizontal Rotation Angle: 0-270 darajat

This flexibility allows for bouncing flash off ceilings or walls to create softer, more natural illumination.

4.5 Reflection Card and Wide Panel

The flash head includes a pull-out reflection card and a wide panel. The reflection card can be used to create a catchlight in the subject's eyes, while the wide panel helps to spread the light for softer, more natural illumination.

4.6 External Power Pack

The TT560II is equipped with a sync socket and terminals for an external power pack (e.g., Godox PB960). This allows for faster recycling times and extended shooting sessions.

5. Pangropéa

• Jaga unit lampu kilat tetep garing. Ulah dicepeng ku leungeun baseuh atawa dilelepkeun kana cai.
• Clean the flash unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Cabut batréna nalika lampu kilat teu dianggo salami waktos anu lami pikeun nyegah bocor.
• Store the flash in its protection bag when not in use to prevent dust and scratches.
• Hindarkeun tabrakan anu kuat atanapi ngajatuhkeun unit.

6. Cara ngungkulan

• Lampu kilat henteu hurung: Check battery levels in both the flash and the transmitter. Ensure the flash is securely mounted on the camera or that the wireless channel settings match between the flash and transmitter.
• Kaluaran lampu kilat anu teu konsisten: Verify battery charge. Ensure the flash head is not obstructed.
• Panas teuing gancang nalika kilat: The unit has multiple auto-self protections against overheating. If the flash becomes hot, allow it to cool down before further use. Reduce flash power or increase the interval between flashes.
• Masalah pemicu nirkabel: Confirm both the flash and transmitter are on the same channel (1-16) and within the 15m working distance. Check for potential interference from other 433MHz devices.

7. Spésifikasi

8. Tips pamaké

• Pariksa kasaluyuan: The Godox TT560II is designed for cameras with a standard hot shoe. If you are unsure about your camera model's compatibility (e.g., Canon d250), please refer to your camera's manual to confirm it has a standard hot shoe.
• Kahirupan batré: For optimal performance and recycling times, use high-quality Ni-MH rechargeable batteries.
• Jangkauan nirkabel: While the stated working distance is 15m, environmental factors can affect wireless performance. Test your setup in your shooting environment.

9. Garansi jeung Rojongan

Godox products are manufactured to high-quality standards. For warranty information and technical support, please refer to the documentation provided with your purchase or contact your local Godox distributor. Keep your proof of purchase for warranty claims.