Scimagic-RC DITEC garage remote control

Scimagic-RC DITEC Garage Door Remote Control Instruction Manual

Model: DITEC garage remote control

1. Bubuka

This manual provides instructions for the Scimagic-RC DITEC Garage Door Remote Control, a compatible replacement for various DITEC rolling code remotes operating at 433MHz/433.92MHz. This remote offers a high level of security with its dynamic rolling code technology.

1.1 Kasaluyuan

This remote control is 100% compatible with the following DITEC models:

NOTE: This remote is NOT compatible with DITEC GOL4C (Fixed code). Please check the color of the LED light on your original remote; GOL4 (Rolling code) typically has a white LED, while GOL4C (Fixed code) has a red LED.

Image showing three DITEC remote control models: ZEN 2, ZEN 4, and GOL4, with text indicating compatibility with DITEC rolling code 433.92 MHz.
Various compatible DITEC remote control models.
Image showing a DITEC GOL4 remote control with a white LED and text 'Rolling code Compatible', next to a GOL4C remote with a red LED and text 'Fixed code Not Compatible'.
Distinguishing between GOL4 (Rolling code) and GOL4C (Fixed code) by LED color.

2. Spésifikasi

FiturSpésifikasi
Ngaran BrandScimagic-RC
Nomer modélDITEC garage remote control
AsalnaDaratan Cina
SertifikasiCE
Métode EncodingKodeu rolling
Frékuénsi433.92mhz/433mhz
Jumlah Kancing2 atawa 4
Sasayogian tanaga3V (CR2032 battery included)
Rentang Gawé10-50 méter (ruang terbuka)
Ukuran (approx.)65mm (L) x 35mm (W) x 10mm (H)
Diagram showing the dimensions of the DITEC remote control: 65mm length, 35mm width, 10mm height. Also lists specifications like frequency, battery, distance, code, and button count.
Dimensi produk jeung spésifikasi konci.

3. Eusi Paket

Paket anjeun kedah kalebet barang-barang ieu:

Image showing the DITEC remote control, a CR2032 battery, and a small instruction manual.
Contents included in the package.

4. Setelan sareng Pemrograman

To program your new DITEC remote control, follow these steps. The process is similar to programming original DITEC transmitter remotes. Always refer to your receiver's user manual for specific details if available.

4.1 Programming a New Remote Control

  1. Access the Receiver: Open the control box of your gate or garage door opener and locate the receiver board. Ensure that jumper JR6 on the receiver board is in the 'on' position.
  2. Mimitian Pemrograman: Press and hold the black PRG button on the receiver board for 5 seconds.
  3. pasangan Jauh: While the receiver is in programming mode, press and hold the button on your new remote that you wish to activate the device for 5 seconds.
  4. Tes: Wait for 10 seconds for the receiver to reset, then test the new remote control.
Image showing a hand pressing a button on a DITEC remote control while another hand points to the PRG button on the DITEC receiver board, illustrating the programming process.
Visual guide for programming the remote control.

4.2 Video Tutorial: Programming and Clearing Codes

This video demonstrates how to program a new remote control and how to clear all existing codes from the DITEC receiver.

5. Parentah Operasi

Once programmed, simply press the corresponding button on your remote control to operate your garage door or gate opener. The remote has a working range of 10-50 meters in open space, allowing for convenient operation from a distance.

A hand holding the DITEC remote control, pointing towards an open gate, with a graphic indicating a 20-100m open area range.
Operating the remote control for gate access.

6. Pangropéa

6.1 Ngagantian batré

The remote control is powered by a 3V CR2032 battery. If the remote's range decreases or it stops responding, the battery may need to be replaced.

A series of four images showing how to open the remote control casing and replace the CR2032 battery.
Steps for replacing the CR2032 battery.

Pikeun ngaganti batré:

  1. Buka remot kontrol kalayan ati-atiasing.
  2. Leupaskeun batré CR2032 heubeul.
  3. Insert a new 3V CR2032 battery, ensuring correct polarity.
  4. Close the remote control casing aman.

7. Cara ngungkulan

8. Garansi jeung Rojongan

Your Scimagic-RC DITEC Garage Door Remote Control comes with the following assurances:

For further assistance or inquiries, please contact the seller directly through the platform where you purchased the product.


How to Program and Clear Codes for Ditec Garage Door Remote Control with Scimagic-RC

How to Program and Clear Codes for Ditec Garage Door Remote Control with Scimagic-RC

0:55 • 1280 × 720 • parentah

Dokumén Patali - DITEC garage remote control

Praview Scimagic-RC DITEC Gol4C Remote Control Programming Manual
User manual for programming the Scimagic-RC DITEC Gol4C 433MHz remote control. Includes steps for deleting existing codes and programming new transmitters for garage doors and gates.
Praview Scimagic-RC Garage Door Opener Remote Programming Guide
Concise guide to programming the Scimagic-RC garage door opener remote. Follow simple steps using the yellow round button and hand-held remote to pair your device for automatic garage door operation.
Praview SMG-8112 Smart Receiver Instruction Manual
Instruction manual for the SMG-8112 smart receiver by Scimagic-RC. Details parameters, setup checklist, user guide for Tuya Smart app, features, and compatibility with 433MHz fixed, learning, and rolling code remote controls.
Praview Scimagic-RC Universal Remote Control Receiver Product Manual
User manual for the Scimagic-RC Universal Remote Control Receiver, detailing product specifications, programming instructions for transmitters, and jumper cap configurations for different operating modes (Toggle, Latched, Momentary). Includes component labels and manufacturer information.
Praview Scimagic-RC PUJOL VARIO Remote Control Programming Guide
Step-by-step instructions for programming the Scimagic-RC PUJOL VARIO remote control for your receiver. Learn how to pair your new remote with your device.
Praview Scimagic-RC ATA PTX-4 Transmitter Code Storage Guide
User guide for storing transmitter codes on Scimagic-RC ATA PTX-4 garage door and gate opener systems. Includes step-by-step instructions.