1. Bubuka
Hatur nuhun pikeun meuliasing the Jebao CWP Series Circulation and Wave Pump. This pump is designed to create beneficial water motion in your aquarium, simulating natural river and sea currents. It is suitable for both salt water and fresh water environments. Please read this manual carefully before installation and operation to ensure proper use and longevity of the product.
2. Émbaran Kasalametan
- Salawasna pegatkeun sambungan catu daya saméméh ngalakukeun sagala pangropéa atawa beberesih.
- Ensure your hands are dry when handling the power plug.
- Entong jalankeun pompa upami kabel listrik atanapi colokan rusak.
- This appliance is designed for indoor aquarium use only.
- Do not allow the pump to run dry. Ensure it is fully submerged in water during operation.
- Jauhkeun tina jangkauan barudak.
- Suhu cai maksimum pikeun operasi nyaéta 35°C.
3. Eusi Paket
Saatos ngabongkar bungkusan, mangga pariksa yén sadaya barang aya sareng dina kaayaan anu saé:
- 1 x Jebao CWP Series Circulation and Wave Pump unit
- 1 x Power cord with plug
Image: Jebao CWP Series pump and accessories as packaged in the box.
4. Spésifikasi
The Jebao CWP Series offers various models with different flow rates and power consumptions. Please refer to the table below for detailed specifications:
| Modél | Voltage | Kakuatan | Max. Flow Rate (Q.Max) | Max. Water Temp | Peunteun IP |
|---|---|---|---|---|---|
| CWP-3000 | 220-240V 50Hz / 120V 60Hz | 4W | 3000 L/H | N/A | N/A |
| CWP-5000 | AC 220V 50Hz | 6W | 5000 L/H | 35°C | IPX8 |
| CWP-6000 | 220-240V 50Hz / 120V 60Hz | 6W | 6000 L/H | N/A | N/A |
| CWP-9000 | 220-240V 50Hz / 120V 60Hz | 12W | 9000 L/H | N/A | N/A |
Note: 'N/A' indicates information not explicitly available on product packaging or labels for those specific models, but general operating conditions apply.
Image: Retail box displaying specifications for CWP-3000, CWP-6000, CWP-9000.
Image: Product label for CWP-5000 model, showing its specific input, power, flow rate, max water temperature, and IPX8 rating.
5. Setélan
5.1 Nempatkeun na Mounting
- Identify a suitable location within your aquarium where water circulation is desired.
- The pump features a super safe magnet-suction cup support for easy positioning. Place the pump unit inside the aquarium and align the external magnet on the outside of the aquarium glass.
- Ensure the pump is securely attached to the aquarium glass. The maximum recommended glass thickness for adsorption is 15mm.
- Adjust the direction of the pump head to achieve the desired water flow pattern. The pump head can be rotated to direct water flow as needed.
Image: Close-up of the magnetic mounting system.
Image: The main pump unit, showing its design for water circulation.
5.2 Sambungan Daya
- Once the pump is securely mounted and fully submerged, connect the power plug to a suitable electrical outlet. Ensure the voltage matches the pump's specifications (e.g., 220-240V 50Hz or 120V 60Hz, depending on your model and region).
Gambar: Example of a power plug for the pump.
6. Parentah Operasi
6.1 Mimitian Pompa
After connecting to power, the pump will start operating immediately. Ensure it is fully submerged before powering on.
6.2 Adjusting Flow
The flow size (rate) can be adjusted as needed. Depending on the specific model, this may involve a physical adjustment on the pump unit or an external controller (if included with your specific model, though not explicitly detailed in general product information). Refer to any additional instructions provided with your specific model variant for precise flow adjustment methods.
6.3 Water Flow Direction
The direction of water flow can be adjusted by manually rotating the pump's outlet nozzle or the entire pump body on its magnetic mount. This allows you to customize the wave and circulation patterns in your aquarium.
7. Pangropéa
Regular maintenance is crucial for the optimal performance and longevity of your Jebao CWP Series pump.
7.1 Ngabersihkeun Pompa
- Pegatkeun sambungan pompa tina catu daya.
- Cabut pompa tina akuarium kalayan ati-ati.
- Disassemble the pump housing and impeller cover.
- Clean the impeller, impeller chamber, and pump housing using a soft brush and clean water. Remove any algae, debris, or mineral deposits.
- Inspect the wear-resistant ceramic shaft for any signs of damage or wear.
- Reassemble the pump, ensuring all parts are correctly fitted.
- Return the pump to the aquarium and reconnect power.
7.2 Inspeksi Biasa
Periodically check the power cord for any damage or fraying. Ensure the magnetic mount remains secure and the pump is operating quietly and efficiently. Unusual noise or reduced flow may indicate a need for cleaning or inspection.
8. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Pompa teu ngamimitian | No power; Impeller jammed; Damaged motor | Check power connection; Clean impeller and chamber; Contact support if motor is damaged. |
| Aliran cai lemah atanapi teu aya aliran cai | Impeller clogged; Inlet/outlet blocked; Air trapped in pump | Clean impeller and clear blockages; Gently shake pump to release air. |
| Sora kaleuleuwihi | Impeller dirty/damaged; Air trapped; Improper mounting | Clean or replace impeller; Release trapped air; Re-secure pump mounting. |
| Pompa eureun intermittently | Overheating; Power fluctuations | Ensure proper water circulation around pump; Check power supply stability. |
9. Garansi jeung Rojongan
For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty-related inquiries. The product is manufactured by Jebao Co., Ltd. (Zhongshan Jebao Electronic Appliance Co., Ltd.).
E-mail: info@jebao.com
Website: http://www.jebao.com
