1. Bubuka
The SINOTIMER XY-501 series is a versatile digital PID temperature controller designed for precise temperature management in various industrial and commercial applications. This controller features a dual display for process value (PV) and set value (SV) in Celsius, supporting a wide range of thermocouple and RTD inputs. It offers both Relay and Solid State Relay (SSR) output options, along with a single alarm output for enhanced control and safety. Constructed from high-quality flame-retardant material, it ensures durability and reliable performance.
Gambar 1: Hareupeun view of the SINOTIMER XY-501 PID Temperature Controller.
2. Fitur konci
- Tampilan Digital Ganda: Simultaneous display of Process Value (PV) and Set Value (SV) in Celsius (°C).
- Input universal: Supports multiple thermocouple types (K, J, S, E, R, B, N, T) and RTD sensors (PT100, Cu50).
- Flexible Output: Configurable for Relay or Solid State Relay (SSR) control output.
- Single Alarm Output: Provides an alarm signal (ALM1) for critical temperature deviations.
- Catu Daya Lega: Operates on 100-240VAC, 50/60Hz.
- Konstruksi awét: Made from high-quality flame-retardant material, offering anti-broken, anti-oxidant, and anti-scratch properties.
- Kontrol PID: Advanced PID algorithm for precise and stable temperature control.
3. Spésifikasi
| Parameter | Spésifikasi |
|---|---|
| Nomer modél | XY-501 (Series includes XY-504, XY-507, XY-509) |
| Ngaran Brand | SINOTIMER |
| Téori | Temperature Controller (PID) |
| Tipe tampilan | DIGITAL (Dual Display) |
| Unit tampilan | Celsius (°C) |
| Jinis kakuatan | Charger (100-240VAC, 50/60Hz) |
| Konsumsi Daya | 5VA |
| Sertifikasi | CE |
| Max Ngukur Suhu | 120°C & Above (up to 1300°C depending on sensor) |
| Ukuran Ukur | K, J, S, E, R, B, N, T (Thermocouple), PT100, Cu50 (RTD) |
| Kaluaran kontrol | Relay / SSR |
| Kaluaran Alarm | ALM1 |
| Akurasi | ± 0.5% |
| Suhu Ambient | 50 ° C Maks |
| Ukuran tampilan | 1.9 inci & handap |
| Gaya | Stasion Ngadeg |
| Paké | Industri |
| Batré Kaasup | No |
| Nyaeta Alat Smart | No |
| Dimensions (XY-501) | 48 * 48 * 78MM |
| Dimensions (XY-504) | 48-86*78MM |
| Dimensions (XY-507) | 72 * 72 * 78MM |
| Dimensions (XY-509) | 96 * 96 * 78MM |
4. Eusi Paket
Saatos muka pakét anjeun, pastikeun sadaya barang aya sareng dina kaayaan anu saé:
- 1 x PID Digital Temperature Controller (Thermocouple/RTD sensor NOT included)
- 1 x Manual Pamaké Inggris
5. Émbaran Kasalametan
Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in equipment damage, personal injury, or death.
- Salawasna pegatkeun listrik sateuacan ngalakukeun kabel atanapi pangropéa naon waé.
- Ensure wiring is performed by a qualified electrician and complies with local electrical codes.
- Do not operate the device in environments exceeding the specified ambient temperature (50°C Max).
- Protect the device from moisture, dust, and corrosive gases.
- Anggo alat pelindung pribadi (PPE) anu pas nalika damel sareng sistem listrik.
6. Instalasi jeung Wiring
The controller is designed for panel mounting. Ensure adequate space for ventilation and wiring connections. Refer to the specific wiring diagram for your model (XY-501, XY-504, XY-507, XY-509) as terminal configurations may vary slightly.
6.1. Diagram Kabel
Below are typical wiring diagrams for the XY-501 series. Always verify the diagram printed on your specific unit for accurate connections.
Figure 2: Wiring Diagram for Model XY-501. Terminals 1-2 for AC power (100-240V), 3-4 for SSR output, 5-6 for Relay output, 7-8 for ALM1, 9-10 for RTD input, 11-12 for Thermocouple input.
Figure 3: Wiring Diagram for Model XY-504. Terminals 1-2 for AC power (100-240V), 3-4 for SSR output, 5-6 for Relay output, 7-8 for ALM1 (NO), 9-10 for ALM1 (NC), 11-12 for RTD input, 13-14 for Thermocouple input.
Figure 4: Wiring Diagram for Model XY-507. Terminals 1-2 for AC power (100-240V), 3-4 for SSR output, 5-6 for Relay output, 7-8 for ALM1 (NO), 9-10 for ALM1 (NC), 11-12 for RTD input, 13-14 for Thermocouple input.
Figure 5: Wiring Diagram for Model XY-509. Terminals 1-2 for AC power (100-240V), 3-4 for SSR output, 5-6 for Relay output, 7-8 for ALM1 (NO), 9-10 for ALM1 (NC), 11-12 for RTD input, 13-14 for Thermocouple input.
6.2. Pedoman Sambungan
- Sasayogian tanaga: Connect the 100-240VAC, 50/60Hz power supply to the designated AC terminals (typically 1 and 2).
- Sénsor Input: Connect your thermocouple (K, J, etc.) or RTD (PT100, Cu50) sensor to the INPUT terminals. Ensure correct polarity for thermocouples.
- Kaluaran kontrol: Connect your heating or cooling device to either the Relay output or SSR output terminals, depending on your application and the type of load.
- Kaluaran Alarm: Connect external alarm devices to the ALM1 terminals if alarm functionality is required.
7. Parentah Operasi
The SINOTIMER PID temperature controller features a user-friendly interface with a SET button, R/S (Reset/Shift) button, and Up/Down arrow buttons for navigation and parameter adjustment.
7.1. Operasi dasar
- Daya Hurung: Once wired correctly, apply power. The controller will perform a self-test and then display the current Process Value (PV) and Set Value (SV).
- Viewdina PV/SV: The upper display (PV) shows the current measured temperature. The lower display (SV) shows the target temperature.
7.2. Setting the Target Temperature (SV)
- Pencét éta SET tombol sakali. Pintonan SV bakal mimiti kedip-kedip.
- Ngagunakeun éta Ka luhur (▲) jeung Turun (▼) arrow buttons to adjust the target temperature.
- Pencét SET again to confirm the new SV and exit the setting mode.
7.3. Accessing Parameter Settings
To access advanced parameters for PID tuning, input type selection, alarm settings, etc., a longer press of the SET button is usually required. The specific sequence and parameter codes will be detailed in the full English User Manual included with your product. Generally:
- Pencét jeung tahan tombol SET button for approximately 3-5 seconds to enter the parameter menu.
- Ngagunakeun éta SET button to cycle through different parameters.
- Ngagunakeun éta Ka luhur (▲) jeung Turun (▼) arrow buttons to change the value of the selected parameter.
- Pencét jeung tahan SET again for 3-5 seconds to save changes and exit, or wait for the controller to automatically exit after a period of inactivity.
7.4. Video Demonstrasi
Video 1: A short demonstration of the SINOTIMER XY-501 series temperature controller's display and basic interaction.
8. Pangropéa
To ensure the longevity and accurate performance of your temperature controller, follow these maintenance guidelines:
- beberesih: Regularly wipe the display and casing ku lawon anu lemes sareng garing. Ulah make cleaners abrasive atawa pangleyur.
- Kaayaan Lingkungan: Keep the controller in a clean, dry environment, free from excessive dust, moisture, and corrosive substances.
- Sambungan: Périodik pariksa sagala sambungan wiring pikeun mastikeun aranjeunna aman tur bebas tina korosi.
- Inspeksi sénsor: Inspect the temperature sensor (thermocouple or RTD) for any signs of damage or wear, especially if operating in harsh conditions. Replace if necessary.
9. Cara ngungkulan
If you encounter issues with your SINOTIMER PID temperature controller, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Teu aya tampilan/Pareuman | Teu aya catu daya atanapi kabelna salah. | Check power connections (100-240VAC). Ensure power is supplied to terminals 1 and 2. |
| Layar PV némbongkeun 'HHHH' atawa 'LLLL' | Sensor open circuit, short circuit, or incorrect input type setting. | Check sensor wiring and connections. Verify the input type setting in the parameter menu matches your sensor. |
| Maca suhu teu akurat | Incorrect sensor type selected, sensor calibration error, or sensor damage. | Confirm correct input type. Check sensor for damage. Perform sensor calibration if available in the manual. |
| Output not activating (heating/cooling) | SV not set correctly, output mode incorrect, or faulty output wiring/device. | Verify SV is set to desired temperature. Check output mode (Relay/SSR) and wiring to the load. Test the load device independently. |
| Alarm not triggering | Alarm parameters not set correctly, or alarm device faulty. | Check alarm type and setpoint in the parameter menu. Ensure the external alarm device is functioning and wired correctly. |
For more detailed troubleshooting, please refer to the comprehensive user manual provided with your product.
10. Tips pamaké
- High Temperature Applications: This controller is suitable for high-temperature applications, capable of working with sensors up to 1300°C (e.g., K-type thermocouples). Ensure your chosen thermocouple or RTD sensor is rated for the desired temperature range.
- Kasaluyuan sénsor: The controller supports a wide range of thermocouple types (K, J, S, E, R, B, N, T) and RTD sensors (PT100, Cu50). Always select the correct input type in the controller's settings to match your connected sensor for accurate readings.
- Pangaturan PID: For optimal performance, especially in critical applications, consider performing a PID auto-tuning process after initial setup. This helps the controller learn the characteristics of your specific heating/cooling system. Refer to the full manual for auto-tuning instructions.
11. Garansi jeung Rojongan
Kanggo inpormasi garansi, dukungan téknis, atanapi patarosan layanan, mangga ngahubungi produsén atanapi tempat pameseran anjeun. Simpen resi pameseran anjeun salaku bukti pameseran.
