Feasycom FSC-BT1036B Bluetooth 5.2 Dual Mode Transmitter Receiver Module

1. Produk Langkungview

The FSC-BT1036B is a sophisticated Bluetooth 5.2 dual-mode module designed for both transmitter and receiver applications. It supports Bluetooth Low Energy (BLE) and classic Bluetooth for seamless audio and data communication. This module integrates an ultra-low-power DSP and application processor, embedded flash memory, a high-performance stereo codec, a power management subsystem, I²S, LED drivers, and ADC I/O within a single System-on-Chip (SOC) IC.

By default, the FSC-BT1036B module comes pre-equipped with powerful and user-friendly Feasycom firmware. This firmware simplifies usage, offering a completely encapsulated solution that allows users to access Bluetooth functionality through simple ASCII commands via a serial interface, effectively operating like a Bluetooth modem.

2. Spésifikasi

3. Fitur konci

• Bluetooth 5.2 classic and low energy support
• Active noise cancellation capabilities
• Voice-activated assistant integration
• High-fidelity 24-bit audio quality
• Wide audio sample rate support: 8 kHz to 384 kHz
• Acoustic echo cancellation for clear communication
• Multiple audio inputs: 3 MIC/Line_IN
• Battery charging functionality (<220mA)
• Supports audio and non-audio data transceiver functions
• Functions as both a transmitter and receiver in one module
• Supports SD, TF, and U-Disk functionalities

4. Aplikasi

The versatile FSC-BT1036B module is suitable for a wide range of applications, including but not limited to:

• speaker Bluetooth
• Bluetooth music boxes
• Wired/wireless stereo headsets and headphones
• USB audio devices
• USB to Bluetooth dongles
• General audio transmitters

5. Setup jeung Instalasi

The FSC-BT1036B is a surface-mount module designed for integration into larger electronic systems. Installation typically involves soldering the module onto a printed circuit board (PCB) and connecting it to the host microcontroller or processor via its UART interface.

5.1 Development Board (DB008)

For prototyping and easier development, the FSC-BT1036B module can be used with the DB008 Development Board. This board provides convenient access to the module's pins and interfaces, simplifying testing and firmware development.

5.2 Sambungan Listrik

Ensure proper power supply (3.1V~4.35V) and UART connections (TX, RX, GND) to the host system. Refer to the detailed pinout diagram in the module's datasheet for precise connections. Incorrect wiring can damage the module.

5.3 Konfigurasi Firmware

The module is controlled via ASCII commands sent over the serial (UART) interface. Consult the Feasycom AT Command Set documentation for detailed instructions on configuring Bluetooth parameters, profiles, and operational modes.

6. Parentah Operasi

The FSC-BT1036B module supports various operational modes for both audio and data communication. Its dual-mode capability allows it to function as both a Bluetooth transmitter and receiver.

6.1 Duplex Operation

The module supports duplex operation, allowing one transmitter to connect to two receivers simultaneously. This is ideal for broadcasting audio to multiple devices.

6.2 Fungsi interkom

The module also supports intercom functionality with up to two simultaneous connections, facilitating two-way communication in appropriate applications.

6.3 Supported Profiles

The FSC-BT1036B supports a comprehensive set of Bluetooth profiles, enabling various functionalities:

• A2DP (Advanced Audio Distribution Profile): For high-quality audio streaming.
• AVRCP (Audio / Video Remote Control Profile): For controlling media playback.
• HFP (Leungeun-Free Profile): For hands-free telephony.
• HSP (Headset Profile): For basic headset functions.
• HOGP (HID leuwih GATT Profile): For Human Interface Devices (e.g., keyboards, mice).
• PBAP (Phone Book Access Profile): For accessing phone book contacts.
• SPP (Serial Port Profile): For serial data communication.

Specific operation details for each profile and mode are available in the detailed Feasycom documentation and AT Command Set.

7. Pangropéa

The FSC-BT1036B module is a robust electronic component designed for long-term operation. Minimal maintenance is required, but adherence to the following guidelines will ensure optimal performance and longevity:

• Kaayaan Lingkungan: Operate and store the module within the specified temperature ranges (-20°C to +85°C operating, -40°C to +85°C storage) and in a dry environment. Avoid exposure to extreme humidity, dust, or corrosive substances.
• Penanganan: Handle the module with care, especially during installation. Avoid static discharge by using appropriate ESD precautions.
• beberesih: If necessary, gently clean the module's surface with a soft, dry cloth. Do not use liquid cleaners or solvents.
• Pembaruan firmware: Periodically check the Feasycom website for any available firmware updates. Updating the firmware can improve performance, add new features, or resolve issues. Follow the provided instructions carefully during the update process.

8. Cara ngungkulan

If you encounter issues with your FSC-BT1036B module, consider the following troubleshooting steps:

• Henteu aya kakuatan: Verify that the power supply is within the specified range (3.1V~4.35V) and correctly connected. Check for any loose connections or short circuits.
• Henteu aya sambungan Bluetooth:
  • Ensure the module is powered on and initialized correctly.
  • Check that the host system is sending the correct AT commands for Bluetooth initialization and pairing.
  • Verify that the target Bluetooth device is in pairing mode and within range.
  • Confirm that the correct Bluetooth profile is selected for the intended application.
• Data/Audio Transmission Issues:
  • Check the UART connections and baud rate settings between the module and the host.
  • Ensure the module's firmware is configured for the correct data or audio format.
  • Reduce the distance between the module and the connected device to rule out range issues.
  • Pariksa poténsi gangguan ti alat 2.4 GHz séjén.
• Module Not Responding to AT Commands:
  • Verify UART connections (TX, RX, GND) and ensure the host's serial port settings (baud rate, data bits, parity, stop bits) match the module's configuration.
  • Ensure the module is in command mode (if applicable, refer to firmware documentation).

For persistent issues, refer to the comprehensive Feasycom documentation or contact technical support.

9. Tips pamaké

As a developer-focused module, optimal usage often depends on careful integration and configuration. Here are some general tips:

• Refer to Datasheet: Always consult the latest official datasheet and AT Command Set documentation from Feasycom for the most accurate and up-to-date information regarding pinouts, electrical characteristics, and command structures.
• Start with Development Board: If you are new to working with Bluetooth modules, begin your project using the DB008 Development Board to quickly understand the module's functionality and simplify initial testing.
• Stabilitas catu daya: Ensure a stable and clean power supply to the module. Fluctuations can lead to unstable operation or unexpected behavior.
• Penempatan anteneu: For optimal range and signal quality, pay attention to antenna placement in your final product design. Avoid placing the antenna near metal objects or other RF-emitting components.

10. Garansi jeung Rojongan

Feasycom provides technical support for its products. For assistance with the FSC-BT1036B module, please refer to the official Feasycom websitus atanapi ngahubungan tim rojongan maranéhanana langsung.

• Bantosan Téknis: support@feasycom.com
• Purchase Support: sales@feasycom.com
• Resmi Websitus: www.feasycom.com

Please retain your proof of purchase for warranty claims. Specific warranty terms and conditions are available on the Feasycom official websitus.