JR1927M 12V 24V Multi-Functional Central Control Switch

1. Produk Langkungview

The JR1927M is a multi-functional central control switch designed for children's electric ride-on vehicles operating on 12V or 24V systems. It integrates power supply management with entertainment features, including Bluetooth music playback, storytelling, power display, and speed adjustment.

This unit serves as a replacement or upgrade for specific kids' ride-on cars. Ensure the appearance of the purchased part has the same appearance as the original one for compatibility.

2. Spésifikasi

3. Instalasi jeung Setup

3.1 Cék kasaluyuan

Before installation, verify that the JR1927M unit's appearance and connector types match the original central control switch in your child's electric vehicle. This unit is designed for specific 12V or 24V ride-on car models.

3.2 Pancegahan Kasalametan

WARNING: Always disconnect the vehicle's battery before beginning any installation or maintenance. Wear appropriate safety gear.

3.3 Léngkah-léngkah Instalasi

1. Locate the existing central control switch in your child's electric vehicle.
2. Carefully disconnect all wiring harnesses and connectors from the old unit. Note the position and orientation of each connector.
3. Remove the old central control switch from its mounting location.
4. Align the new JR1927M unit with the mounting points. Ensure it fits securely.
5. Connect all wiring harnesses and connectors to the corresponding ports on the JR1927M unit. Refer to the images below for connector identification. Pay close attention to the voltage (12V or 24V) and specific model (A or B style) of your unit, as connector configurations may vary slightly.
6. Once all connections are secure, reconnect the vehicle's battery.
7. Test all functions (power, lights, music, speed, forward/reverse) to ensure proper operation.

Gambar 1: Hareupeun view of the JR1927M control panel, showing buttons and display.

Gambar 2: Tukangeun view of the JR1927M control board, showing circuit layout and connectors.

Figure 3: Comparison image showing both Style A and Style B control panels and their respective rear boards, highlighting the additional socket on Style B.

Gambar 4: Hareup jeung pungkur view of the JR1927M-12V control unit, showing the green circuit board.

4. Operasi

Familiarize yourself with the control panel buttons and their functions:

• Mimitian / STOP: Press this central button to power the unit on or off.
• LAMP: Controls the vehicle's lights.
• MODÉ: Cycles through different functions, such as Bluetooth, USB playback, or storytelling.
• Gancang/Laun: Adjusts the vehicle's speed settings.
• D Forward: Engages forward movement for the vehicle.
• R Back: Engages reverse movement for the vehicle.
• Sateuacanna: Skips to the previous audio track.
• TERAS: Skips to the next audio track.
• VOL- / VOL+: Decreases or increases the audio volume.
• PLAY/PAUSE MUSIC: Muterkeun atanapi ngareureuhkeun playback audio.
• B))): Activates Bluetooth pairing or a specific audio function.
• Port USB: Connect a USB device for music playback (if available on your model).
• Digital tampilan: Shows information such as power status (voltage 'V'), time ('T'), or current mode ('U').

Gambar 5: Hareupeun view of an alternative JR1927M control panel (Style B), showing buttons and display, including an SD card slot.

5. Pangropéa

• Keep the control panel clean and dry. Use a soft, dry cloth to wipe away dust and dirt.
• Ulah ngantepkeun unit ka kalembaban anu kaleuleuwihi atanapi suhu anu ekstrim.
• Regularly check all wiring connections for looseness or corrosion.
• Do not attempt to open the unit or perform repairs yourself, as this may void any potential warranty and could cause damage.

6. Cara ngungkulan

• Unit teu hurung:
  • Check the vehicle's battery connection and ensure it is fully charged.
  • Verify that the 'START/STOP' button is pressed firmly.
  • Inspect all wiring connections to the control unit for proper seating.
• Music/Audio not working:
  • Ensure the USB device is properly inserted and contains compatible audio files.
  • Check Bluetooth pairing if using that mode.
  • Verify volume settings.
• Vehicle not moving:
  • Confirm the unit is powered on.
  • Check the 'D Forward' or 'R Back' buttons are pressed correctly.
  • Ensure the vehicle's motor and drive system are functioning correctly (this unit controls the signal, not the motor directly).

7. Tips pamaké

• For optimal performance, ensure the vehicle's battery is always adequately charged.
• Familiarize children with the controls in a safe environment before allowing unsupervised play.
• If your unit has an SD card slot (Style B), ensure the SD card is formatted correctly and contains supported audio files pikeun playback.

8. Garansi jeung Rojongan

Kanggo inpormasi garansi atanapi dukungan téknis, mangga ngahubungi penjual atanapi produsén sacara langsung. Simpen resi pameseran anjeun salaku bukti pameseran.

Refer to the product packaging or seller's websitus pikeun istilah jeung kaayaan jaminan husus.