1. Bubuka
The FIBARO Double Smart Module (FGS-224) is a Z-Wave compatible device designed to enhance your smart home system by providing control over two independent electrical circuits or devices. This module replaces previous generation Relay Switch devices, offering improved security and expanded application possibilities. It is part of the new family of FIBARO SMART MODULES, built on a newer Z-Wave generation for improved range and security.
The FGS-224 offers dry contact (potential-free contacts) for universal application and supports various modes of operation including ON/OFF, timed switching, and cyclic switching. It is ideal for controlling lighting, heating systems, safety devices, entrance gates, and more.
2. Setup jeung Instalasi
The FIBARO Double Smart Module is designed for installation in electrical boxes with a minimum diameter of 50mm and depth of 60mm. Installation should be performed by a qualified electrician to ensure safety and proper functionality.
2.1 Pedoman Instalasi Umum
- Pastikeun catu daya utama dipegatkeun sateuacan ngamimitian padamelan pamasangan.
- Turutan kode sareng peraturan listrik lokal.
- The module operates on 100-240V~ 50/60Hz or 24-30VDC power supply.
- The connection diagram remains unchanged from previous versions, utilizing proven terminal strips for ease of installation.
2.2 Diagram Kabel (Contonaample)
Due to the complexity and variety of potential wiring configurations, it is crucial to consult the specific wiring diagram provided with your product packaging or available from FIBARO's official support resources for your exact application. Always ensure correct polarity and load capacity.
2.3 Kalebetna Jaringan Z-Wave
Once wired, the module needs to be included in your Z-Wave network. Refer to your Z-Wave gateway's manual for specific inclusion steps. The FGS-224 supports Z-Wave 5 series chip with S2 and Smart Start features for enhanced security and easier setup.
3. Parentah Operasi
The FIBARO Double Smart Module allows for versatile control of connected devices. It can be operated via your Z-Wave gateway, associated Z-Wave devices, or directly through connected wall switches.
3.1 Operasi Dasar
- Kontrol ON/OFF: The primary function is to switch connected devices ON or OFF. This can be done remotely via your Z-Wave controller or locally using physical switches wired to the module.
- Scene Activation: The module supports launching up to 5 types of scenes based on input actions (e.g., single click, double click, hold).
3.2 Fitur canggih
- Timed Switching: Configure the module to automatically switch devices ON or OFF after a specified time.
- Cyclic Switching: Set up repetitive ON/OFF cycles for specific applications.
- NO/NC Modes: The module supports both Normally Open (NO) and Normally Closed (NC) modes, offering flexibility for various applications.
- Ngawas énergi: The FGS-224 provides active power (W) and electrical energy (kWh) measurements, allowing you to monitor the power consumption of connected devices.
4. Pangropéa
The FIBARO Double Smart Module is designed for maintenance-free operation once properly installed. No user-serviceable parts are inside.
- beberesih: If necessary, gently wipe the exterior of the module (if accessible) with a dry, soft cloth. Do not use chemical cleaners or abrasive materials.
- Pembaruan firmware: Periodically check the FIBARO website or your Z-Wave gateway's interface for available firmware updates to ensure optimal performance and security.
5. Cara ngungkulan
5.1 Isu umum jeung Solusi
- Modul teu ngaréspon:
- Check power supply to the module.
- Verify Z-Wave network connectivity. Try re-including the module if necessary.
- Ensure the connected load is within the specified limits (6A per channel, 9.5A overall). - Difficulty with Z-Wave inclusion/exclusion:
- Ensure the module is within range of your Z-Wave gateway.
- Follow the inclusion/exclusion steps precisely as described in your gateway's manual.
- Try performing a factory reset on the module (consult FIBARO documentation for specific steps). - Incorrect device status:
- Check the wiring connections for any loose or incorrect terminals.
- Ensure the Z-Wave network is stable and not experiencing interference.
5.2 Reset pabrik
A factory reset will remove the module from the Z-Wave network and restore all parameters to their default settings. Consult the official FIBARO documentation for the precise procedure for the FGS-224 module, as this typically involves a specific sequence of button presses or power cycles.
6. Spésifikasi
| Parameter | Nilai |
|---|---|
| Sumber Daya | 100-240V~ 50/60Hz or 24-30VDC |
| Rated load current (resistive loads only) | 6A per channel, 9.5A overall |
| Suhu operasi | 0°C - 35°C |
| Pikeun instalasi dina kotak | Ø ≥ 50mm, jero ≥ 60mm |
| Protokol radio | Z-Wave (chip 500 séri) |
| Radio frequency (EU) | 868.4 atawa 869.8 MHz |
| Radio frequency (ANZ) | 921.4 atawa 919.8 MHz |
| Rentang | up to 40m (131 ft) (depending on building structure) |
| Outside dimensions (L x W x H) | 42.5mm x 38.25mm x 20.3mm |
| Patuh kana arahan EU | RoHS 2011/65/EU, RED 2014/53/EU, 2015/863 |
7. Tips pamaké
Based on common inquiries and user experiences, here are some tips for getting the most out of your FIBARO Double Smart Module:
- Vérsi Z-Wave: The FGS-224 is based on the Z-Wave 5 series chip, ensuring good compatibility and features.
- Optimasi Rentang: For optimal Z-Wave range, ensure the module is not installed in metal enclosures or too far from other Z-Wave devices that can act as repeaters.
- Kustomisasi Adegan: Explore the scene activation capabilities of your Z-Wave gateway to create custom automations using the module's input actions (e.g., turn on lights with a double-click of a connected switch).
8. Garansi jeung Rojongan
FIBARO products are designed for high reliability and safety. For warranty information, please refer to the documentation provided with your purchase or visit the official FIBARO website. Technical support can be accessed through FIBARO's customer service channels, which typically include online resources, FAQs, and direct contact options.
Always ensure you are using official FIBARO resources for support and product information.
