SINOTIMER SVP-912 Adjustable Automatic Reconnect Protection Device

1. Bubuka

The SINOTIMER SVP-912 is an advanced adjustable automatic reconnect protection device designed to safeguard your household appliances and electrical systems from over-voltage jeung sahandapeun-voltage conditions. This device features a dual LED display for real-time voltage and current monitoring, along with adjustable protection parameters to suit various electrical environments. Its automatic recovery function ensures continuous power supply after a fault is cleared, providing reliable and convenient protection.

2. Émbaran Kasalametan

• Pamasangan sareng pangropéa ngan ukur kedah dilakukeun ku tukang listrik anu mumpuni.
• Ensure the main power supply is disconnected before any installation or wiring.
• Do not operate the device if it appears damaged or faulty.
• This device is designed for indoor use only and should be protected from moisture and extreme temperatures.
• Verify all connections are secure and correctly wired to prevent electrical hazards.

3. Produk Langkungview

The SVP-912 is a compact, DIN rail-mountable device featuring a clear dual LED display. One display shows the current voltage, and the other shows the current. It includes three buttons (SET, Up, Down) for easy parameter adjustment. Indicator lights provide visual feedback on the device's status, including over-voltage jeung sahandapeun-voltage kaayaan.

4. Spésifikasi

5. Setup jeung Instalasi

5.1 Pamasangan

The SVP-912 is designed for 35mm DIN rail mounting. Simply clip the device onto the DIN rail in your electrical distribution box.

5.2 Diagram Wiring

Refer to the following diagram for correct wiring. Ensure all connections are tight and follow local electrical codes.

• IN (Input): Connect the incoming Line (L) and Neutral (N) wires from your main power source or upstream circuit breaker.
• OUT (Kaluaran): Connect the outgoing Line (L) and Neutral (N) wires to the load (e.g., household appliances, distribution circuit).
• Ensure proper grounding if required by your electrical system.

6. Parentah Operasi

6.1 Mimiti Power-On

Upon initial power-on, the device will undergo a self-check. The under-voltage indicator LED will not light during the power-on delay time (default 2s) until the protector is closed after the delay time. The LED display will show the current voltage.

6.2 Parameter adjustment

Pikeun nyaluyukeun parameter panyalindungan:

1. Pencét éta SET button once to enter the setting mode. The first adjustable parameter will flash.
2. Ngagunakeun éta ▲ (Luhur) jeung ▼ (Turun) tombol pikeun ngarobah nilai.
3. Pencét SET deui pikeun mastikeun nilai sareng ngalih ka parameter salajengna.
4. Repeat steps 2 and 3 for all desired parameters.
5. If no button is pressed for a few seconds, the device will automatically exit setting mode and save the changes.

Adjustable parameters and their default values:

• Leuwih-voltage nilai panyalindungan: 221V ~ 300V (OFF), default: 280V
• Leuwih-voltage recovery value: 220V ~ 299V, default: 250V
• Leuwih-voltage protection action time: 0.1s ~ 10s, default: 0.1s
• Dina-voltage nilai panyalindungan: 150V ~ 219V (OFF), default: 160V
• Dina-voltage recovery value: 151V ~ 220V, default: 180V
• Dina-voltage protection action time: 0.1s ~ 10s, default: 0.1s
• Recovery delay time: 2s ~ 512s, default: 60s (Time before device reconnects after a fault)
• Power-on delay time: 2s ~ 255s, default: 2s (Delay before device powers on after initial connection or power restoration)

6.3 Lampu Indikator

• Voltage indikator: Flashes quickly during over-voltage, slowly during under-voltage. Stays on constantly during normal operation (within warranty period).
• Leuwih-voltage indikator: Red LED, indicates over-voltage kaayaan.
• Dina-voltage indikator: Red LED, indicates under-voltage kaayaan.
• Indikator kakuatan: Green LED, indicates device is powered on.

6.4 Mulangkeun Setélan Pabrik

To restore the device to its default factory settings, press and hold the ▲ (Luhur) jeung ▼ (Turun) buttons simultaneously for 3 seconds. The under-voltage indicator LED will turn off for 1 second, confirming that the factory settings have been restored.

7. Cara ngungkulan

• Alat teu hurung: Check the input power supply and ensure connections are secure.
• Device not reconnecting after fault: Verify the "Recovery delay time" setting. If set to OFF, manual reset might be required (though this model is automatic reconnect). Ensure the fault condition (over/under voltage) has cleared.
• salah voltage/current display: Ensure proper wiring. If the issue persists, contact support.
• Frequent tripping: Review your set over-voltage jeung sahandapeun-voltage protection values. They might be too sensitive for your electrical environment. Adjust them within safe limits.

8. Tips pamaké

• Setélan tés: After adjusting any parameters, it is recommended to simulate a fault condition (if safely possible) or monitor the device closely to ensure it operates as expected.
• Penempatan optimal: Install the protector in a location that is easily accessible for monitoring and adjustments, but also protected from physical damage and environmental factors.
• Cék biasa: Periodically check the display for normal operation and ensure no error indicators are active.

9. Pangropéa

• Jaga alat tetep beresih sareng leupas tina lebu. Paké kaen garing, lemes keur beberesih.
• Ulah make cleaners abrasive atawa pangleyur.
• Périodik mariksa sambungan kabel pikeun tightness jeung tanda maké atawa korosi.
• Taya bagian-pamaké-serviceable jero. Ulah nyobian muka atawa ngalereskeun alat.

10. Garansi jeung Rojongan

This product typically comes with a manufacturer's warranty. For warranty claims, technical support, or further assistance, please refer to the contact information provided by your seller or the manufacturer, SINOTIMER. Keep your purchase receipt as proof of purchase.