Buku Panduan Motherboard Laptop HP 14-AN

1. Bubuka

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the HP 14-AN series laptop motherboard. This motherboard is designed for HP 14-AN laptops and comes with an integrated AMD E2-7110 CPU. Please read this manual thoroughly before proceeding with any installation or maintenance to ensure proper functionality and safety.

Gambar 1: Hareupeun view of the HP 14-AN laptop motherboard

Gambar 2: Balik view of the HP 14-AN laptop motherboard

2. Setup jeung Instalasi

Installation of a laptop motherboard requires technical expertise. It is highly recommended that installation be performed by a qualified technician. Improper installation can lead to damage to the motherboard or other components.

2.1 Cék Pra-Pamasangan

Before installing the new motherboard, ensure the following:

• Verify the motherboard model number matches your laptop's requirements (e.g., 858047-601, 858047-501, 858047-001 for HP 14-AN series).
• Ensure you have the necessary tools (e.g., screwdrivers, anti-static wrist strap).
• Gawé di lingkungan anu bersih, henteu statik.

2.2 Léngkah-léngkah Pamasangan (Pedoman Umum)

The following steps are general guidelines. Always refer to your specific laptop's service manual for detailed disassembly and reassembly instructions.

1. Pegatkeun Daya: Ensure the laptop is powered off and disconnected from the AC adapter. Remove the battery.
2. Bongkar Laptop: Carefully disassemble the laptop, removing the bottom cover, keyboard, display assembly, and any other components obstructing access to the old motherboard.
3. Hapus motherboard heubeul: Disconnect all cables (e.g., display, Wi-Fi, speakers, power, USB) and remove screws securing the old motherboard. Gently lift it out.
4. Pasang Motherboard Anyar: Place the new motherboard into the laptop chassis, ensuring it aligns correctly with screw posts and ports. Secure it with screws.
5. Sambungkeun komponén: Reconnect all cables and components to their respective ports on the new motherboard. Pay close attention to the display cable, Wi-Fi card, and power connections.
6. Install RAM and Storage: Insert RAM modules into the DDR3 slots and install any SSD/HDD.
7. Pasang deui laptop: Carefully reassemble the laptop, ensuring all components are properly seated and secured.

Figure 3: RAM slots and part number detail

Figure 4: Integrated AMD E2-7110 CPU

Figure 5: Motherboard model number detail

3. Parentah Operasi

Once the motherboard is correctly installed and the laptop reassembled, you can power on the device.

1. Daya Hurung: Connect the AC adapter and press the power button. The laptop should boot up.
2. Setup BIOS/UEFI: If necessary, enter the BIOS/UEFI settings (usually by pressing F2, F10, or Del during startup) to configure boot order, date/time, or other system settings.
3. Pamasangan Sistem Operasi: If you are installing a new operating system, follow the on-screen prompts. Ensure all necessary drivers are installed for full functionality.
4. Pariksa Fungsionalitas: Verify that all peripherals and integrated components (e.g., Wi-Fi, Bluetooth, USB ports, audio, touchpad, keyboard, display) are working correctly.

4. Pangropéa

Pangropéa anu leres tiasa manjangkeun umur motherboard sareng laptop anjeun.

• Tetep Bersih: Regularly clean the laptop's vents and fan to prevent dust buildup, which can cause overheating. Use compressed air for this purpose.
• Hindarkeun Cairan: Keep liquids away from the laptop to prevent spills that can damage the motherboard.
• Nanganan kalayan ati-ati: When performing internal maintenance, always handle the motherboard by its edges and use an anti-static wrist strap to prevent electrostatic discharge (ESD) damage.
• Apdet parangkat lunak: Keep your operating system and drivers updated to ensure optimal performance and compatibility.

5. Cara ngungkulan

This section addresses common issues you might encounter. The motherboard undergoes rigorous testing before shipment to ensure full functionality.

5.1 Isu umum jeung Solusi

• Teu aya Daya / Teu aya tampilan:
  • Ensure the AC adapter is working and properly connected.
  • Check if the display cable is securely connected to the motherboard and screen.
  • Coba pasang deui modul RAM.
• Laptop Not Booting:
  • Verify the hard drive/SSD is properly connected and detected in BIOS.
  • Check boot order in BIOS settings.
• Peripherals Not Working (e.g., USB, Audio, Wi-Fi):
  • Ensure all internal cables are correctly connected to the motherboard.
  • Install or update relevant drivers from the laptop manufacturer's websitus.
  • Check device manager for any unrecognized devices.
• Batré Teu Ngecas:
  • Verify the battery connector on the motherboard is secure.
  • Test with a known good battery or AC adapter.
• Instabilitas Sistem / Kacilakaan:
  • Check for overheating; ensure the fan is clean and functioning.
  • Run memory diagnostics to check RAM integrity.
  • Ensure the operating system is stable and free of malware.

5.2 Testing Procedures (as performed by manufacturer)

The following procedures are typically performed to ensure the motherboard is fully functional before dispatch:

1. Set up CPU & RAM. Power on to test if the screen works well.
2. Install with fan, Wi-Fi card, battery, keyboard, touchpad, DVD, turn on to check if BIOS number is correct.
3. Check WLAN, Wi-Fi signal, and Internet Surfing function.
4. Confirm DVD & SD card reader functions work well.
5. Music playing to check audio and earphone plug.
6. See if battery can normally charge and discharge.
7. Then touchpad, USB slots and all lights.
8. Switch Built-in screen to external screen testing.
9. Run 3D mark.
10. Restart the Windows.

Video 1: Demonstration of the motherboard testing process.

Gambar 6: Leuwihview of motherboard testing procedures

6. Spésifikasi

6.1 Ukuran Paket

• Panjangna: 36 cm
• lebar: 26 cm
• Jangkungna: 6 cm
• beurat: 1.0 kg

7. Tips pamaké

• Verifikasi Fungsionalitas: Upon receiving and installing the motherboard, perform a thorough test of all components (screen, keyboard, touchpad, Wi-Fi, USB ports, audio, battery charging) to ensure everything is working as expected. This aligns with common user inquiries about proof of functionality.
• Pamasangan profésional: Due to the complexity of laptop disassembly and reassembly, professional installation is strongly recommended to avoid damage.
• Pencegahan Statis: Always use an anti-static wrist strap when handling the motherboard to protect sensitive electronic components from electrostatic discharge.

8. Garansi jeung Rojongan

The manufacturer ensures that all motherboards are 100% fully tested before shipping to guarantee quality and functionality. If you encounter any issues or have questions, please contact the seller directly. They are committed to providing support and resolving any problems you may experience.

The seller offers a service commitment including fast delivery and refunds for issues such as delayed delivery (coupon code if delayed), lost packages, or damaged items. Additionally, free returns are available within 90 days of receipt.