Robotime ROKR LK503 3D Wooden Puzzle Owl Clock Model

Bubuka

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Robotime ROKR LK503 3D Wooden Puzzle Owl Clock Model. This intricate model kit offers an engaging building experience, culminating in a functional clock with a mechanical timer. Designed for enthusiasts aged 14 and above, it serves as both a decorative piece and an interactive educational tool.

The fully assembled Owl Clock Model.

Eusi pakét

Upon opening your kit, please verify that all components are present and undamaged. The package typically includes:

• Pre-cut wooden sheets containing all puzzle pieces.
• Quartz clock movement mechanism.
• Clock hands (hour, minute, second).
• Small metal components (e.g., springs for timer, screws).
• Assembly Instruction Manual (English brochure).
• Other accessories required for assembly (e.g., sandpaper, wax).

Typical contents of the ROKR LK503 Owl Clock kit.

spésifikasi

Product dimensions for the Owl Clock Model.

Parentah Majelis

The ROKR LK503 Owl Clock is designed for easy assembly without the need for glue. All wooden pieces are pre-cut and can be gently pushed out from their sheets. Follow the detailed, step-by-step instructions provided in the included English brochure.

Léngkah Majelis Umum:

1. Carefully push out all pre-cut wooden pieces from their sheets. Use sandpaper if necessary to smooth any rough edges.
2. Identify each piece according to the numbering in the instruction manual.
3. Assemble the components by interlocking them as shown in the diagrams. Pay close attention to the orientation of each piece.
4. Integrate the quartz clock movement and the mechanical timer components as instructed.
5. Ensure all gears and moving parts are correctly aligned and can move freely.

Assembling the pre-cut wooden pieces using the instruction manual.

Parentah Operasi

Fungsi Jam:

The main clock function is powered by a quartz movement. To activate the clock:

1. Locate the battery compartment for the clock movement.
2. Insert one (1) 1.5V AA/LR6 battery (not included), ensuring correct polarity.
3. Set the time by rotating the adjustment knob on the back of the clock movement.

The quartz movement requires a 1.5V AA battery (not included).

Fungsi Timer:

The Owl Clock features a mechanical timer with a bell. Follow these steps to operate the timer:

1. Lengkah 1: Rotate the timer pointer counter-clockwise. The timer can be set for a maximum of 30 minutes (one full circle).
2. Lengkah 2: Rotate the timer key clockwise to wind the timer mechanism. A slight resistance indicates it is fully wound.
3. Lengkah 3: Rotate the bell key clockwise to wind the bell mechanism. A slight resistance indicates it is fully wound.
4. Lengkah 4: Gently pull the timer pendulum slightly to activate the countdown.
5. Lengkah 5: The bell will ring when the set time has elapsed.

Steps 1-3: Winding the timer and bell.

Step 4: Activating the timer pendulum.

Step 5: The bell rings when the timer finishes.

Video Demonstrasi:

For a visual guide on assembly and operation, please refer to the official product video:

Pangropéa

• beberesih: Use a soft, dry cloth to gently wipe the wooden surfaces. Avoid using abrasive cleaners or excessive moisture.
• Ngagantian batré: Replace the AA battery for the clock movement annually, or when the clock starts losing time.
• Lubrication: For optimal performance of the mechanical timer gears, a small amount of wax (often included in the kit) can be applied to the gear teeth as instructed in the assembly manual.
• Panyimpenan: Store the assembled clock in a dry environment away from direct sunlight and extreme temperature changes to prevent wood warping or damage.

Pamérésan masalah

• Clock not keeping accurate time: Ensure the AA battery is fresh and correctly inserted. Check that the clock hands are not obstructed or touching each other.
• Timer not ringing or not counting down: Verify that both the timer key and bell key have been fully wound clockwise. Ensure the timer pendulum has been pulled to initiate the countdown. Check for any obstructions in the mechanical gears.
• Wooden pieces not fitting: Refer back to the assembly manual to confirm the correct piece and orientation. Do not force pieces together; gently sand edges if necessary.
• Gears are stiff: Apply a small amount of wax to the gear teeth as per the assembly instructions to reduce friction.

Tip pamaké

• Sabar mangrupikeun konci: Take your time during assembly. Rushing can lead to breakage or incorrect placement of pieces.
• Penanganan Lembut: The wooden pieces are delicate. Handle them with care, especially when pushing them out from the sheets.
• Battery for Clock, Winding for Timer: Remember that the main clock function is battery-powered (quartz movement), while the timer function is mechanical and requires manual winding.
• Check Gear Movement: After assembling sections with gears, test their movement to ensure they turn smoothly before proceeding to the next steps.

Garansi sareng Rojongan

For any issues not covered in this manual, or for further assistance, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase. Specific warranty details may vary by region and seller.