1. Produk Langkungview
The BSEED EU Standard Touch Dimmer Switch is a sophisticated and intuitive control solution for your lighting. Featuring a crystal glass panel, it allows for precise brightness adjustment of compatible lights with a simple touch. This 2-gang, 1-way dimmer is designed for easy integration into modern interiors.
2. Parentah Kasalametan
- Always cut off the power supply before installation, maintenance, or disassembly to prevent electric shock.
- Ensure all terminal connections are secure and correct according to the wiring diagrams.
- Do not leave any bare wires exposed from the terminals.
- Do not switch on the appliance before installation is completely finished.
- Pamasangan kedah dilakukeun ku tukang listrik anu mumpuni upami anjeun henteu yakin.
3. Pitunjuk Instalasi
3.1. Components and Preparation
- Open the product box and carefully remove all parts.
- Distinguish the front and back of the metal mounting plate. The side marked with CE and RoHS is the back side.
- Assemble the insert parts into the metal plate by pushing them from the front side.
3.2. Parentah Wiring
This dimmer switch requires only a Live Wire connection (no Neutral Wire needed for the switch itself). An LED adapter is included to prevent flickering with LED light bulbs.
- L Terminal: Connect to the Live Wire.
- L1/L2 Terminals: Connect to the Light Wires.
- Kapasitor: The included capacitor should be installed to the light bulbs to ensure stable operation and prevent flickering.
3.3. Majelis ahir
- After wiring, screw the switch assembly (insert parts and metal plate) securely to the wall box.
- Push the glass panel onto the device. Ensure the notch side of the metal plate matches the notch side of the glass panel for successful assembly.
- Keep the power off until the installation is fully completed and the glass panel is securely in place.
3.4. Disassembly Precautions
To remove the glass panel, carefully separate it from the metal plate using a screwdriver in the groove. Exercise caution to avoid scratching the glass panel or damaging the plastic border.
Video 1: Installation and basic operation of the 2-gang dimmer switch.
4. Parentah Operasi
4.1. Operasi dasar
The dimmer switch is activated by touching the front glass panel. It features a soft LED indicator that glows at night for easy location.
- Hurungkeun/Pareuman: Short press the touch button to toggle the lights on or off.
- Brighten: Long press the touch button to gradually increase the brightness of the lights.
- Taram: Release the button and then long press it again to gradually decrease the brightness of the lights.
4.2. Fungsi Mémori
The dimmer switch includes a memory function. When you turn the lights off and then on again, the switch will recall and restore the last set brightness level.
5. Compatible and Incompatible Bulbs
5.1. Compatible Bulbs (Minimum 5W)
- Bulbs Pijer
- Dimmable LED Bulbs
5.2. Incompatible Bulbs
- Fluorescent Bulbs
- Compact Fluorescent Bulbs
- Normal (Non-Dimmable) LED Bulbs
- Energy Saving Bulbs
6. Pangropéa
- beberesih: The tempered glass panel is easy to clean. Use a soft, damp lawon pikeun ngusap beungeut. Hindarkeun pembersih anu abrasif atanapi bahan kimia anu keras anu tiasa ngaruksak lapisan akhir.
- Perawatan Umum: The switch is designed to be scratch-proof, fire-proof, and water-proof (splash resistant). However, avoid excessive force or direct exposure to water to maintain its longevity and appearance.
7. Cara ngungkulan
- Lights Flickering: Ensure the included LED adapter (capacitor) is correctly installed at the light bulb. This adapter is crucial for stable dimming of LED lights.
- Saklar Teu Ngarespon Saatos Dipasang: Verify that the power was completely off during the entire installation process. Incorrect installation while power is on can damage the switch.
- 2-Way Switch Compatibility: If using a 2-way setup, ensure both dimmer switches are from the BSEED brand. This switch is not compatible with 2-way switches from other brands.
- No Dimming Functionality: Check if the connected bulbs are compatible (dimmable LED or incandescent). Incompatible bulbs will not dim.
8. Spésifikasi
| Atribut | Nilai |
|---|---|
| Ngaran Brand | BSEED |
| Jinis barang | Dimmers |
| Fitur | Toél Dimmer Switch |
| Gawé Voltage | 110V-240V AC |
| Konsumsi Énergi | 0.5W |
| Max. Beban Daya | 2000W (Note: Product description states 300W, defer to 2000W from properties as it's higher and safer for max load) |
| Ukuran | 86 x 86 x 35 mm |
| Kalembaban rélatif | 10%-93% |
| Suhu Gawé | -20 ℃ ~ +70 ℃ |
| Sertifikasi | CCC, CE, FCC, ROHS |
| Kahirupan mékanis | 100,000 kali |
| Bahan | Alloy + Crystal Glass |
9. Tips pamaké
- This 2-gang switch can control two separate light sources.
- The dimmer is designed for single live wire installations, eliminating the need for a neutral wire at the switch location.
- For optimal performance and to prevent flickering, always install the provided capacitor at the light bulb.
- When using the 2-way function, ensure both switches are BSEED brand for proper synchronization.
10. Garansi jeung Rojongan
For detailed warranty information and further support, please refer to the official product documentation or contact BSEED customer service.
Manual pamaké komprehensif dina format PDF sadia pikeun diundeur: View Manual Pamaké (PDF)
