styletech STY-BS250 LED Portable Bluetooth Speaker
What In The Box
- 1x LED Portable Bluetooth Speaker
- 1x USB A-C Charging/Power Cable
Product Specification
- Bluetooth: 5.3
- Wireless working distance: 10m
- SNR: (Signal to Noise Ration) ≥ 90db
- Speaker Drivers:
45mm x2 - Frequency Response: 120Hz – 20KHz
- Power: 4
/ 5w x2 - Battery: 3.7v / 2500mAh
- Charging: 5v / 500mA
- Unit Size: 76mm x 76mm x 221mm
- Unit Weight: 520g
CONTROLS
USB C Connection: Use provided cable to charge the battery or power the speaker
USB Pen Drive: Play MP3/WAV format- TF Memory Card: Play MP3/WAV format
AUX Connection: Play audio using a 3.5mm – 3.5m jack cable, connected to a compatible device. Cabe not included
Minus Symbol: Single press for the previous track.
- Press and hold to decrease volume
Power: Press and hold to power on/off
- Play/Pause: Single press to play or pause a track
Mode: Switch between AUX and Bluetooth
LED Lights: Single press for up to 8 lighting effects. To turn off the led lighting press and hold the button, to turn back press once.
Plus Symbol: Single press for next track. Press and hold to increase volume
SETUP
INSTALLATION
Bluetooth
- Press and hold the power button. The speaker will confirm you are in Bluetooth mode.
- Go to Bluetooth settings on your chosen device and select – STY-BS250
- The speaker will confirm that your device is connected
If you receive a call whilst music is playing you can answer by pressing the Power button on your speaker, to end the call simply press the same button.
AUX Connection
- To connect the speaker to a chosen device using a 3.5mm – 3.5mm cable (sold separately) insert one end into a compatible device and the other end into the AUX port (#4) on the speaker. This should connect instantly and ready for use.
- To switch between AUX and Bluetooth, just press the Mode (#7) button once.
Charging
- Using the provided cable, insert the smaller end into the USB C port on the speaker and the larger end into a free USB A port.
- The speaker will signal its charging with a circular LED glowing red next to the USB C COnnection (#1). When fully charged the light will turn off.
- To power off – press and hold the power button
- To adjust the LED lights, press the light button in single increments
Please Note: The battery lasts much longer with the LED lights turned off.
Legal information
- Please keep this instruction manual for future reference. If you require any help or assistance please contact help@abptech.co.uk
Warranty
This product is guaranteed for a period of one year from the date of purchase. During this period if there is a defect due to faulty materials, or workmanship the retailer from whom you purchased it will replace it with the same or a similar model on production of your purchase receipt or proof of purchase. This guarantee does not cover defects arising from accidental damage, misuse or wear and tear, and is available only to the original purchaser of the product. This does not affect your statutory rights.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Precautions
- Ensure that the volume control is set to the minimum level before connecting the speaker to
- Set the volume control to its minimum level then slowly increase it until you reach your desired volume level
- Listening to your speaker at its maximum level may cause damage to both the speaker and your ears
- Long-term exposure to loud music or other sounds may cause hearing damage. It is best to avoid very high volume levels, especially for extended periods
Important Safeguards & Precautions
- Never exposed to direct sunlight or wet weather conditions
- Do not expose the unit to splashing, dripping, rain or moisture. Do not immerse in liquid
- Do not expose to dust, high humidity, high temperatures or mechanical shock
- Avoid any unnecessary strain of the cable
- Do not carry the headset by its cable
- Do not use if the equipment is damaged
- Do not disassemble; there are no serviceable parts inside cabinet finish and ling, side soft, clean, damp cloth only. Use of detergents may damage the cabinet finish and leak inside
Battery Care
- The speaker is only to be charged under adult supervision
- Once the speaker is fully charged disconnect the USB charging cable
- Do not attempt to charge any other battery pack or device using the USB charging cable
- Do not leave the speaker on charge for longer than 6 hours
- Never dispose of batteries in fire as this co in cause them to explode while unattended
- Do not attempt to remove the speaker’s built-in battery pack, it is not replaceable
Recycling
Where you see this symbol on any of our electrical products, batteries or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in the EU or Turkey. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance with any applicable local laws or requirements for disposal of electrical equipment/batteries.
In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste.
The recycling and processing of Waste Electrical and Electronic Equipment will make a significant contribution towards helping protect the environment by reducing landfill waste.
Not recommended for children under 6 years of age.
MADE IN CHINA
Marking symbols
Marking of this symbol indicates this product has been tested and is compliant with the EMC Directive of the European Union 2014/30/EU.
Marking of this symbol indicates this product conforms to Electromagnetic Compatibility Regulations 2016 issued by the UK.
FCC STATEMENT
Federal Communication Commission
Class B Interference Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. determined by nuing these time if are en, no user or elisign reception corich can be interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
- The device has been evaluated to meet general RF exposure requirements.
- The device can be used in portable exposure conditions without restriction.
Canadian ICES Statements
Canadian Department of Communications Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio-noise emissions from a digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Not recommended for children under 6 vears of age. Please retain this packaging for future Reference. Due to de company policy of constant improvement and technical refinement, the company reserves the right to alter the specification. Actual product may differ from packaging imagery.
More Information
- Manufactured By: ABP Technology Ltd. Bolton, UK, BL2 1BX.
- EU AR: ABP Technology Europe Ltd. Dublin, ROI, K78 X5W6.
- All Rights Reserved. MADE IN CHINA.
HAVING TROUBLE SETTING UP? WE CAN HELP!
- EMAIL: help@abptech.co.uk
- How can we help? Our support team will answer your questions
Documents / Resources
 |
styletech STY-BS250 LED Portable Bluetooth Speaker [pdf] User Guide STY-BS250, STY-BS250 LED Portable Bluetooth Speaker, LED Portable Bluetooth Speaker, Portable Bluetooth Speaker, Bluetooth Speaker, Speaker |