Mesebetsi e mengata ea LCD
Lebokose la Lenaneo G2
Bukana ea Mosebelisi

Kea leboha kapa u reka lebokose la lenaneo la LCD G2, ka kopo bala bukana ena ka hloko pele u e sebelisa.
Lebokose la lenaneo la ZTW Multifunction LCD G2 G2 ke thepa e kopanyang mesebetsi e mengata, e nyenyane ho jara le e loketseng ho beha litekanyetso tsa ESC{Electronic Speed ​​​​ Controler.

TŠEBELETSO

1. E sebetsa sesebelisoa sa motho ka mong ho beha liparamente tsa ESC.
2. Ho sebetsa joalo ka voltmeter ea betri ea Lipo ho lekanya matla a matlatage ea pakete eohle ea betri le sele ka 'ngoe
3. Bakeng sa ZTW ESC e nang le ts'ebetso ea ho khutlisa data, e ka bonts'a data ea nako ea nnete ho kenyelletsa: voltage, hona joale, ho kenya letsoho, ho lla ha motlakase, RPM, matla a betri, mocheso oa MOS le mocheso oa motlakase.
4. Bakeng sa ZTW ESC e nang le ts'ebetso ea ho rengoa ha data, e ka bala data ho kenyelletsa: boholo ba RPM, bonyane ba voltage, boholo ba hona joale, mocheso oa ka ntle, le mocheso o phahameng ka ho fetisisa,
5. Ho lemoha lets'oao la PWH throttle: Khetholla le ho bonts'a bophara ba throttle pulse le maqhubu.
6. ESC/Servo Tester: E sebetsa ke remote control ho lokisa lebelo la ESC/servo ka ho tobetsa konopo ea bod's program.
7. Lebokose la lenaneo la LCD le ka ntlafatsoa ke mobile App ka mojule oa ZTW bluetooth,

TS'ELISO

• Boima: 84 * 49 * 115mm
• Boima: 40g
• Phepelo ea matla: DC5 ~ 12.6V

LOKELANG BAKENG SA ESC

1. Beatles G2, Mantis G2. Skyhawk
2. Shark G2. Tiisa G2. Dolphin

TLHALOSO EA KONONANE E NNGWE LE E MNGWE LE BOBONG

1. NTHO: Fetola lintho tse lokiselitsoeng ho potoloha.
2. : Fetola lintho tse lokiselitsoeng ho potoloha ka tsela e nepahetseng.
3. : Fetola lintho tse lokiselitsoeng ho potoloha ka tsela e mpe.
4. 0K: Boloka le ho romela liparamente tsa hajoale ho ESC.
5. ESC: Sebelisa mohala oa lenaneo ho hokahanya boema-kepe bona le boema-kepe ba mananeo ba ESC.
6. Batt: Boema-kepe ba ho kenya motlakase ka lebokoseng la mananeo.
7. Tlhahlobo ea Betri: Hokela boema-kepe bona le likhokahanyo tsa ho tjhaja tekanyo ea betri.

LITS'ELISO

A. Ho sebetsa e le sesebelisoa sa motho ka mong ho beha litekanyetso tsa ESC

1. Hokela betri ho ESC.
2. Khetha mokhoa o lumellanang oa ho hokahanya, 'me u kopanye ESC le lebokose la lenaneo la LCD.
   1. Haeba mohala oa ESC o arolelana mohala o le mong le mohala oa throttle, ebe o ntša mohala oa mohala ho tsoa ho moamoheli ebe o hokela boema-kepeng ba "ESC" lebokoseng la LCD la lenaneo. (Sheba setšoantšo sa 1)
   2. Haeba ESC e na le boema-kepe bo ikemetseng ba mananeo, ebe e sebelisa mohala oa mananeo ho hokahanya boema-kepe ba ESC le "ESC" lebokose la LCD la lenaneo. (Sheba setšoantšo sa 2)
3. Hokela ESC ho betri.
4. Haeba khokahano e nepahetse, lebokose la lenaneo la LCD le bonts'a skrine ea pele, tobetsa "ITEM" kapa" OK "konopo lebokoseng la lenaneo la LCD, skrine e bontša , joale e bonts'a ntho e ka khonehang ea Ist ka mor'a metsotsoana e seng mekae, e bolelang hore lebokose la lenaneo la LCD le hokahanya le ESC ka katleho. Tobetsa "iteEM" "” le “” ho khetha likhetho, tobetsa konopo ea "OK" ho boloka data.

Hlokomela:

1. Seta bocha ESC ka lebokose la lenaneo la LCD
   Ha khokahano lipakeng tsa ESC le LCD lebokose la lenaneo ke thehile ka katleho, tobetsa konopo ea "ITEM" makhetlo a 'maloa ho fihlela "Restore Default" e hlaha, tobetsa konopo ea "OK", ebe lintho tsohle tse ka lokisoang ho pro ea hajoale.file li setiloe bocha ho likhetho tsa kamehla tsa feme.
2. Bala tlaleho ea data ea ESC ka lebokose la lenaneo la LCD
   Bakeng sa li-ESC tse nang le ts'ebetso ea ho rema lifate, lintlha tse latelang li ka hlahisoa ka mor'a menu ea "Khutlisa.
   RPW e sa fetoheng, bonyane ba matlatage, boholo ba hona joale, mocheso oa ka ntle, le mocheso o phahameng ka ho fetisisa. Li-ESC tse se nang ts'ebetso ea ho boloka data li tla hlahisa lintlha tsena)
3. Lekola ESC e tsamaisang data ka nako ea nnete ka lebokose la lenaneo la LCD
   Bakeng sa li-ESC tse nang le ts'ebetso ea ho khutlisa data, ha khokahano lipakeng tsa ESC le LCD lebokose la lenaneo le thehiloe ka katleho:
   1. Lebokose la lenaneo la LCD le ka bontša lintlha tse latelang ka nako ea sebele: voltage, hona joale, ho kenya letsoho, ho lla ha motlakase, RPM, matla a betri, mocheso oa MOS le mocheso oa motlakase.
   2. Haeba ESC e na le liphoso, lebokose la lenaneo la LCD le tla bontša phoso ea hona joale ka selikalikoe. Liphoso li tjena ka tlase:

   Tšireletso ea SC	Tšireletso ea Shortcircuit
   Senya Tshireletso	Tšireletso ea terata ea motlakase
   Tšireletso ea Tahlehelo	Tšireletso ea tahlehelo ea throttle
   Tšireletso ea Zero	“Throttle inten zero position ha e felisitsoe.
   Tšireletso ea LYC	Vol e tlasetage tshireletso
   Tšireletso ea Nako	Tšireletso ea mocheso
   Qala Tšireletso	Qala ts'ireletso ea rotor e notletsoeng
   Tšireletso ea 0C	Ho feta ts'ireletso e nepahetseng
   PPH_THR ERROR	The PPM throttle s ha e na moeli
   UART_THR PHOSO	UART throttle e hlokomela mefuta e mengata:
   UART_THRLOSS	UART throttle tahlehelo:
   KHOTHATSO	E ka fokotsa tahlehelo
   BAT_VOT PHOSO	Matla a betri voltage ha e maemong

B. PWM throttle signal lemoha
Ha sesebelisoa sa lets'oao sa PWM joalo ka moamoheli se le maemong a tloaelehileng a ho sebetsa, hokela seamoheli le lebokose la lenaneo la LCD, Tobetsa 'me u tšoare likonopo. bakeng sa metsotsoana ea 3 ka nako e le 'ngoe, Ebe u khetha "Input Signal", e ka khetholla le ho bonts'a bophara ba pulse throttle pulse le maqhubu.

C.ESC/Servo Tester

E sebetsa joalo ka taolo e hole ho lokisa lebelo la ESC/servo ka ho tobetsa konopo ea lebokose la lenaneo.

1. Tobetsa le ho tšoara likonopo bakeng sa metsotsoana e 3 ka nako e le 'ngoe, ebe u khetha "Output Signal
2. Tobetsa konopo ka ho latellana throttle e tla eketseha kapa e fokotsehe ka "1us", tobetsa nako e telele or konopo bakeng sa metsotsoana e ka bang 3 ho eketsa kapa ho fokotsa thottle ka potlako.
3. Tobetsa konopo ea "ITEM, throttle e tla fokotseha ka likarolo tsa "100us" tobetsa konopo ea OK-, the throttle will lncrease n units of "100us".

D. Ho sebetsa e le voltmeter ea betri ea Lipo ho metha voltage ea pakete eohle ea betri le sele ka 'ngoe

1. Betri: 2-85Li-Polymer/Li-Lon/LIHVILi-Fe
2. ho nepahala: £0.1v
3. Ts'ebeliso e kenyetsa sehokelo sa tjhaja ea betri boema-kepe ba "BATTERY CHECK' ea lebokose la lenaneo la LCD ka thoko, (Ka kopo etsa bonnete ba hore palo e nyarosang e supa ™" lebokoseng la lenaneo).

E. Ntlafatsa firmware ea lebokose la lenaneo la LCD
Lebokose la lenaneo la LCD le lokela ho nchafatsoa hobane mesebetsi ea ESC e ntse e ntlafatsoa khafetsa, mokhoa o tjena:

1. Fana ka matla bakeng sa lebokose la lenaneo la LCD ka ESC, betri kapa sesebelisoa sa motlakase se ka ntle, sebaka sa phepelo ea matla ke 5-12.6V.
2. Hokela mojule oa ZTW Bluetooth koung ea "ESC" ea lebokose la lenaneo la LCD.
3. Khoasolla ZTW APP 'me u e kenye fonong ea hau, ka mor'a ho e kenya ka katleho, bula bluetooth ea fono ea hau, fumana "ZTW-BLE-XXXxX", ebe o tobetsa "Connect" .
4. Kamora hore khokahano e atlehe, khetha "Firmware", ebe u khetha "Firmware Update".
5. Khetha firmware ea morao-rao ebe o tobetsa "OK" ho ntlafatsa.
6. Ema metsotsoana e seng mekae ho fihlela sebopeho se bonts'a "Upgrade Atleha"

Shenzhen ZTW Model Science & Technology Co.,Ltd
KENYA: 2/F, Block 1, Guan Feng Industrial Park, Jiuwei, Xixiang, Baoan, Shenzhen, China, 518126
TEL: +86 755 29120026, 29120036, 29120056
FAX: +86 755 29120016
WEBSETSE: www.ztwoem.com
EMAIL: support@ztwoem.com

Litokomane / Lisebelisoa

ZTW Multi Functional LCD Program Card Card G2 [pdf] Bukana ea Mosebelisi Multi Functional LCD Program Card G2, Functional LCD Program Card G2, LCD Program Card G2, Program Card G2, Card G2, G2

Litšupiso

• Bukana ea Mosebelisi