WyreStorm EX-100-KVM-IP IP Thehiloe KVM Extender
Litlhaloso tsa Sehlahisoa
- Mohlala: EX-100-KVM-IP
- Likaroloana: Zero Latency, USB2.0, 1G Network Plug & Play Extender
- Phepelo ea motlakase: DC 12V
Litaelo tsa Tšebeliso ea Sehlahisoa
Litlhoko tsa ho Kena:
Netefatsa hore o na le lintho tse latelang pele o qala ts'ebetso ea ho instola:
- 1x Sete ea Extender
- Phepelo ea Matla a 2x DC 12V (US/EU/UK/AU Pins bakeng sa E 'ngoe le e 'ngoe)
- Li-brackets tse 4x tse Behang (Ka Li-Screw)
- 1x USB Type B Cable
- 1x Quickstart Guide
Litšoantšo tsa motheo tsa Wiring:
Latela litšoantšo tsa lithapo tse fanoeng bukeng ea litaelo ho hokela li-encoder le li-decoder unit ka nepo ho latela setaele sa hau.
Tlhophiso ea Encoder:
- Hokela sesebelisoa sa mohloli oa HDMI ho HDMI In port.
- Hokela thapo ea mofuta oa A ho thaepa thapo ea B pakeng tsa boema-kepe ba USB Host le komporo ea khomphutha kapa laptop.
- Hokela lisebelisoa tsa USB (mohlala, keyboard, mouse) boema-kepeng ba Sehokelo sa Sesebelisoa sa USB.
- Hokela ho adaptara ea motlakase ea DC 12V.
Tlhophiso ea Decoder:
- Hokela pontsho ya HDMI ho koung ya HDMI Out.
- Hokela ho encoder kapa switjha bakeng sa ho kenya media inthaneteng ka port ea LAN.
- Hokela lisebelisoa tsa USB (mohlala, keyboard, mouse) boema-kepeng ba Sehokelo sa Sesebelisoa sa USB.
- Hokela ho adaptara ea motlakase ea DC 12V.
DIP Switch Setting:
Ho tsamaisa lets'oao ho tloha ho sekhoudara ho ea ho sekhoudara, fetola switch e 'ngoe le e 'ngoe ea switch ea DIP ho sekoudara hore e tsamaellane le litlhophiso tsa sekhoudara. Qala bocha likarolo ka bobeli hore liphetoho li tle li sebetse.
LBH
- Ke litlhophiso tse kae tse teng bakeng sa litlhophiso tsa switjha tsa DIP?
Ho na le litlhophiso tse fihlang ho tse 16 tse fumanehang bakeng sa li-encoder tse 16 ho amahanngoa le motho a le mong le li-decoder tse 16 marang-rang a tšoanang. - Ke etsa'ng haeba ke batla ho hokahanya sekhoudara ho sekhoudara se fapaneng?
Fetola litlhophiso tsa switch ea decoder hore li tsamaellane le litlhophiso tse ncha tsa khouto, ebe u qala likarolo ka bobeli hore liphetoho li sebetse.
BOHLOKOA! Litlhoko tsa ho Hloma
- Bala karolong ea Wiring le Connections bakeng sa litataiso tsa bohlokoa tsa likhoele pele u theha kapa u khetha lithapo tse entsoeng esale pele.
- Etela leqephe la sehlahisoa ho khoasolla firmware ea morao-rao, mofuta oa tokomane, litokomane tse ling, le lisebelisoa tsa tlhophiso.
Ka Lebokoseng
- 1x Sete ea Extender
- Phepelo ea Matla a 2x DC 12V (US/EU/UK/AU Pins bakeng sa E 'ngoe le e 'ngoe)
- Li-brackets tse 4x tse Behang (Ka Li-Screw)
- 1x USB Type B Cable
- 1x Quickstart Guide
Lisebelisoa tsa motheo tsa Wiring
Direct Connection Extender
Extender ka Network Switch
FEELAVIEW
EX-100-KVM-IP Sekhouto (Ka Pele/Ka morao)
- A LAN Hokela ho dekhoudara kapa switjha bakeng sa phallo ea media e pharalletseng.
- B Link LED Mabone a LED ha encoder e atlehile ho tsamaisana le dekhoutara ka katleho.
- C Matla a LED Lebone la LED ha sesebelisoa se buletsoe.
- D DC 12V Hokela ho adaptara ea matla ea 12V e fanoeng.
- E HDMI In Hokela ho sesebelisoa sa mohloli oa HDMI.
- F USB Host Hokela mofuta oa USB oa mofuta oa A ho thaepa thapo ea B lipakeng tsa kou le kou ea USB ea komporo kapa laptop.
Boema-kepe bo lumellana le USB 2.0. - G Channel ID Phetoho ena ea DIP e na le li-switches tse 'ne tse sebelisoang ka letsoho, tse sebelisoang ho tsamaisa encoder ho ea ho dekhodara ho ipapisitsoe le maemo a tsona. Ho fumana lintlha tse ling, sheba karolo ea "Using DIP Switch to Perform Routing".
Hlokomela:- Ka ho sa feleng, switjha e 'ngoe le e 'ngoe e maemong a holimo.
- Bakeng sa ho fapoha ha DIP ho encoder le decoder, o tlameha ho bulela encoder bocha le decoder hore litlhophiso tsa switjha li sebetse.
EX-100-KVM-IP Dekhoutara (Ka Pele/Ka morao)
- Sesebelisoa sa USB Hokela ho lisebelisoa tsa USB (mohlala, keyboard, mouse, Udisk, joalo-joalo)
- B Link LED Mabone a LED ha encoder e atlehile ho tsamaisana le dekhoutara ka katleho.
- C Matla Lebone la LED le khantša ha sesebelisoa se buletsoe.
- D DC 12V Hokela ho adaptara ea matla ea 12V e fanoeng.
- E LAN Hokela ho encoder kapa switch bakeng sa ho kenya media media.
- F HDMI E tsoa Hokela pontshong ya HDMI.
- G Channel ID Phetoho ena ea DIP e na le li-switches tse 'ne tse sebelisoang ka letsoho, tse sebelisoang ho tsamaisa encoder ho ea ho dekhodara ho ipapisitsoe le maemo a tsona. Ho fumana lintlha tse ling, sheba karolo ea "DIP Switch Setting".
Hlokomela:- Ka ho sa feleng, switjha e 'ngoe le e 'ngoe e maemong a holimo.
- Bakeng sa ho fapoha ha DIP ho encoder le decoder, o tlameha ho bulela encoder bocha le decoder hore litlhophiso tsa switjha li sebetse.
DIP Switch Setting
Ho tsamaisa lets'oao ho tloha ho sekhoudara ho ea ho sekhoudara, fetola switjha e 'ngoe le e 'ngoe ea sesebelisoa sa DIP ho sekoudara ho ea sebakeng se ts'oanang le sa sekhouto. Haeba u batla ho hokahanya sekoudara ho sekhoudara se fapaneng, fetola litlhophiso tsa switjha tsa sekhouda ka tsela e ts'oanang le ha sesebelisoa sa encoder se etsoa.
Hlokomela:
- Dipeakanyo tsa switjha tsa DIP di sebetsa tseleng ya motho a le mong ho ya ho a le mong pakeng tsa encoder le decoder feela, ke hore, ho fihla ho 16 ditlhophiso tsa di-switches tsa DIP di a fumaneha bakeng sa dikhouto tse 16 ho amahanngwa motho a le mong ho ya ho a le mong le dikhouto tse 16 marangrang a tshwanang. .
- U tlameha ho qala sekhouda le sekoudara hore liphetoho tsa tlhophiso ea switjha li sebetse.
Ho kenya & Wiring
Hlokomela: Pele o kenya le ho kenya lithapo, etsa bonnete ba hore sesebelisoa se khaotsoe mohloling oa matla.
Ho kenya Bracket
Ho kenya li-brackets tse ntseng li phahama holim'a metsi:
- Hokela bracket e ntseng e hola sebakeng se kampetsoeng u sebelisa likurufu tse fanoeng ka har'a sephutheloana ka thoko. Bracket e khomaretsoe sebakeng se kampetsoeng joalo ka ha ho bonts'itsoe.
- Pheta mohato oa 1 bakeng sa lehlakore le leng la sesebelisoa.
- Hokela li-brackets holimo tseo u batlang ho li tšoara khahlanong le ho sebelisa li-screw (tse sa kenyelletsoeng sephutheloana).
BOHLOKOA! Litaelo tsa Wiring
- Tšebeliso ea li-patch panels, lipoleiti tsa lebota, li-cable extenders, kink in cables, le tšitiso ea motlakase kapa ea tikoloho e tla ba le phello e mpe ho phetiso ea matšoao e ka fokotsang ts'ebetso. Mehato e lokela ho nkoa ho fokotsa kapa ho tlosa lintlha tsena ka ho feletseng nakong ea ho kenya liphetho tse ntle ka ho fetisisa.
- WyreStorm e khothaletsa tšebeliso ea mohala oa sehlopha se sirelelitsoeng ho fokotsa lerata le tšitiso.
- WyreStorm e khothaletsa ho sebelisa likhoele tsa HDMI tse felisitsoeng esale pele ka lebaka la ho rarahana ha mefuta ena ea likhokahanyo. Ho sebelisa likhoele tse felisitsoeng ho tla etsa bonnete ba hore likhokahano tsena li nepahetse 'me li ke ke tsa kena-kenana le ts'ebetso ea sehlahisoa.
Ho batle phoso
Setšoantšo sa Che kapa sa Boleng bo Fosahetseng (lehloa kapa setšoantšo se lerata)
- Netefatsa hore motlakase o fepeloa ho transmitter le sesebelisoa se amohelang.
- Netefatsa hore likhokahano tsohle tsa HDMI le UTP ha li lokolohe 'me li sebetsa hantle.
- Netefatsa hore thapo ea UTP e felisitsoe ka nepo ho latela maemo a EIA568B.
- Netefatsa hore qeto ea sephetho sa mohloli le ponts'o e tšehetsoa ke sehole sena.
Malebela a ho rarolla mathata
WyreStorm e khothalletsa ho sebelisa mochine o hlahlobang thapo kapa ho hokela thapo ho lisebelisoa tse ling ho netefatsa ts'ebetso.
Boitsebiso ba Warranty
WyreStorm Technologies ProAV Corporation e fana ka tiisetso ea hore lihlahisoa tsa eona li se ke tsa e-ba le sekoli linthong tse bonahalang le tšebetsong tlas'a tšebeliso e tloaelehileng nako ea lilemo tse hlano (5) ho tloha ka letsatsi la theko. Sheba leqephe la Tiisetso ea Sehlahisoa ho wyrestorm.com bakeng sa lintlha tse ling mabapi le waranti ea rona e lekantsoeng ea sehlahisoa.
Litlhaloso
MABAPI KAMPANI
- INT: +44 (0) 1793 676 683
- US: 844.280.WYRE (9973)
- support@wyrestorm.com
Litokomane / Lisebelisoa
 |
WyreStorm EX-100-KVM-IP IP Thehiloe KVM Extender [pdf] Bukana ea Mosebelisi EX-100-KVM-IP IP Thehiloe KVM Extender, EX-100-KVM-IP, IP Thehiloe KVM Extender, Thehiloe KVM Extender, KVM Extender, Extender |
