wiiyii P6 Multi-Function Trip Computer

Kea leboha ha u rekileasing our product，this product reads the driving data of the car through the OBD2 interface of the car ECU line computer, such as vehicle speed,RPM, fuel consumption, water temperature and voltage, joalo-joalo Ho boloka mahlo a mokhanni a lula a le tseleng ho qoba kotsi ea ho theola hlooho ho bala dashboard. Sehlahisoa sena ha se ngole hape data efe kapa efe ho ECU.

Ka Mosa Hloko

Mokhoa oa ho sebetsa oa OBD2 voltage: 11V ~ 18VDC (12vdc / 200mA), ha voltage phahameng ho feta 24V, ka kopo sebelisa thapo ea USB bakeng sa mokhoa oa GPS. Model P6 ke OBD + GPS dual system. Kamora ho bulela, khetha puo le sistimi ka bolokolohi, tobetsa konopo ea ''>' ho khetha OBD kapa sistimi ea GPS, ebe o kenya sistimi ea ho qetela e khethiloeng kamora metsotsoana e 5 ea ho se sebetse.

Mesebetsi ea konopo

1. "<" senotlolo
2. Senotlolo sa "OK".
3. ">" senotlolo
4. Pontšo ea Nako
5. Leseli la Sepakapaka
6. Brakete

• tobetsa e khuts'oane (1 motsotsoana oa khatiso)
• tobetsa nako e telele (2 metsotsoana e tobetsa), lokolla ka mor'a hore skrine ea pontšo e fetohe

Tobetsa nakoana '<'

1. Fetolela puo le sistimi ts'ebelisong ea pele
2. Fetolela pontsho ya tshebetso ka mora pontsho e tlwaelehileng
3. Fokotsa lenane kapa boleng ba paramethara ka mor'a ho kenya litlhophiso

Tobetsa nakoana 'OK'

1. Khetha tshebetso
2. Fetola skrini ka mor'a pontšo e tloaelehileng

Tobetsa nako e telele 'OK'

1. Kenya li-setting
2. Kamora ho lokisa, tobetsa hape bakeng sa metsotsoana e 2 ho boloka le ho tsoa

Tobetsa nakoana'>'

1. Fetolela puo le sistimi ts'ebelisong ea pele
2. Fetolela pontsho ya tshebetso ka mora pontsho e tlwaelehileng
3. Eketsa lenane kapa boleng ba paramethara ka mor'a ho kenya litlhophiso

Hlahisa likhutsufatso tsa tšebetso

ECT= mocheso oa metsi a enjene	VLT= voltage	FUE= tshebediso ya mafura
RPM= lebelo la enjine	TIM= nako ea tsamaiso	MIN= nako ea maeto
DIS= sebaka sa maeto	'MAPA= khatello ea ho noa	OIT= mocheso oa oli
A/F= karo-karolelano ea mafura a moea	TCP= khatello ea turbo	PSI= khatello ea turbo
RTC= nako ea sathelaete	ASL= bophahamo	GPS= nomoro ea sathelaete
DIR= tsela ya ho kganna	KM/L= lik'hilomithara ka litara	CVT=mocheso oa phetiso
LETSATSI= mojaro oa enjene	IAT= mocheso oa moea o kenang	TPS= Throttle

Ho ipehela Mokhoa

Tobetsa nako e telele konopo ea'OK' bakeng sa metsotsoana ea 2 ho kenya ntho ea ho seta, tobetsa konopo ea'>'ho eketsa khetho ea menu, tobetsa konopo ea ok hape ho kenya boleng ba parameter, tobetsa konopo ea'>' kapa '< 'konopo ho fetola boleng ba paramethara, tobetsa konopo ea'OK'ho netefatsa le ho khutlisa Menu, tobetsa konopo ea'OK' bakeng sa metsotsoana e 2 ho boloka le ho tsoa.

• Sete ea puo: CN-Simplified Chinese/ TW-traditional Chinese/ EN-English
• Switjha ea molumo: ON-turn on the alarm/ HO TIMA- tima alamo
• Alamo ea Lebelo: Alamo ha lebelo la koloi> 150km/h, sebaka sa ho seta ke 50-200
• Alamo e phodileng: Alamo ha mocheso oa metsi o feta 120 ° C, sebaka sa ho seta ke 50-200
• Alamo ea RPM: alamo ha lebelo la enjene> 6000r/min, sebaka sa ho seta ke 1000-8000
• Alamo ea BAT: alamo ha voltage <10.5v, sebaka sa ho seta ke 10.0-15.0v
• Ho Fetola Lebelo: fetola boleng ba paramente ha ho na le phoso lipakeng tsa lebelo le phanele ea lisebelisoa (bakeng sa mohlalaample, sesebelisoa se bonts'a 100 Km / h mme sesebelisoa se bonts'a 105Km / h, 'me boleng ba paramethara bo fetotsoe ho 102 ho daela)
• Speed ​​​​Offset: ha lebelo la koloi le sa khutlele ho 0 ka mor'a hore koloi e tingoe (Haeba lebelo la koloi le bontša 5Km / h, thepa e fetoloa ho 6Km / h)
• Fetola BAT: ha ho na le phoso pakeng tsa voltage le phanele ea lisebelisoa voltage, phetoho e ntle e ka etsoa (Haeba sesebelisoa se bonts'a 0.2V holimo ho feta sesebelisoa sa voltage, sesebelisoa se fetotsoe ho 98%)
• Boima ba Enjene: ha phoso ea tšebeliso ea mafura e le kholo, fetola ho latela phallo (Haeba phallo ea koloi e le 3.6L, fetola boleng ba paramente ho 3.6L)
• Mafura: tokiso e ntle ha ho na le phoso tšebelisong ea mafura (Haeba sesebelisoa se hlahisa 0.2L ho feta matla a sesebelisoatage, sesebelisoa se fetotsoe ho 98%)
• Khanya: Auto= kutloisiso ea khanya e iketsang, 1= e lefifi ka ho fetesisa, 8 =e khanyang ka ho fetesisa
• Atmosphere: ON= tima = tima
• Setsi sa CWT: °C =Celsius, °F = Fahrenheit
• Setsi sa Lebelo: Km/h= dikhilomithara MPH= dimaele
• Kakaretso ea Bohole: Kamahanyo ya maele kaofela
  • (Ka mohlalaample, kakaretso ea odometer ho dashboard e bonts'a hore u tsamaile 30010km, fetola boleng ba parametha ho 30010km)
• Nako ea ho tima: default ke 10s ho koala, ha e tingoa ha u ntse u khanna, e ka fetoloa ho feta 180s
• Boroko Voltage: fetola 13.2V kapa 13.6 voltagMokhoa oa ho koala ha o sa khone ho koala RPM ke lebelo la kamehla la ho koala, COM ke mokhoa oa ho qala oa othomathike le mokhoa o khethehileng oa likoloi tsa motlakase tse nyalisitsoeng.
• Nako Fetola: e ka fetoloa ho latela nako ea lehae, nako ea kamehla ke nako ea China (GMT+8)
• Factory Set: sisteme e khutlisetsa boleng ba fektheri esale pele. Kamora ho khetha ts'ebetso ena, tobetsa konopo e khuts'oane ho netefatsa

Litlhophiso tsa ho rarolla mathata

• Skena khoutu ea phoso: hlahloba hore na koloi e na le phoso 'me u bontše lintlha tse fosahetseng
• Hlakola khoutu ea phoso: ha koloi e na le khoutu ea phoso, tobetsa hakhutšoanyane 'OK'ho hlakola khoutu ea phoso

Auto Hloekisa

Lemoha ka kopo: Ho kgothaletswa ho hula sesebelisoa haeba koloi ea hau e sa sebelisoe nako e fetang beke.

OBD FAQ

Ha ho ts'ebetso e hlahang, ha ho matla

Lekola hore na mohala oa OBD o hokahane ka thata, hula fatše khafetsa ho netefatsa, ka kopo e leke koloing e 'ngoe haeba e ntse e sa sebetse, tlhahlobo haeba e le sesosa se tsoang ho OBD diagnostic interface, haeba ho joalo, ka kopo e lokise ebe o hokela sesebelisoa hape.

Ke koloi feela voltage bonts'a 'me e tingoe motlakase ka mor'a metsotsoana e 30

1. Sehlahisoa sena se fumaneha feela bakeng sa likoloi tsa OBDII le EOBD ha se le ka mokhoa oa OBD2
2. OBD2 ke protocol ea koloi (E loketse likoloi tse hlahisoang kamora 2008)
3. Sehlahisoa sena sa OBD2 mode ha se tšehetse OBD I le JOBD
4. Fetohela ho sistimi ea GPS u sebelisa thapo ea USB ho bonts'a, nakong ea metsotsoana e 5 ea matla a khuts'oane tobetsa konopo ea '>' ho khetha sistimi ea GPS.

Lebelo le sa nepahalang

1. Ka kopo netefatsa hore yuniti e nepahetse KM/mile MPH, (speed unit switch ka kopo sheba mokhoa oa li-setting)
2. Kamora ho bulela le ho bonts'a ka mokhoa o tloaelehileng, koloi e tobetse nako e telele konopo ea'OK' bakeng sa metsotsoana ea 2 ho kenya litlhophiso tsa sistimi, tobetsa'>'konopo ho fetohela ho tlhophiso ea sistimi, khetha "Speed ​​​​Adjust" bakeng sa phetoho e ntle (bakeng sa ex.ample, mitha e bonts'a 100 Km / h, sesebelisoa se bonts'a 105Km / h, letsetsa boleng ba parameter ho 102).

Tšebeliso e sa nepahalang ea mafura

Sheba ho falla ha koloi ea hau. Beha phallo ea enjene sebakeng se tšoanang ho li-setting tsa sistimi (mohlalaample, haeba koloi e le 2.0L, boleng ba parameter bo fetotsoe ho 2.0L). Haeba phallo e ntse e tšoana, o ka boela oa lokisa lintlha tsa tšebeliso ea mafura litlhophisong tsa "Fuel Adjust" (joalo ka sesebelisoa ha pontšo e phahama.tage e phahame hofeta seletsa voltage ke 0.2L, sesebelisoa se fetotsoe ho 98%)

Tlhahiso: Hobane data ena ke data ea komporo ea maeto, ha ho hlokahale hore ho lokisoe hantle

HUD ha e khone ho koala ka bo eona

Kamora hore enjene ea koloi e eme, RPM le lebelo mochining li ke ke tsa tima, ka kopo kenya li-menu tsa "Sleep Vol.tage”, beha voltage ho 13.2V kapa 13.6V, e le hore koloi e ka tima ka boeona ka mor'a metsotso e 3.

Ho qala ka othomathiki ho tla tima ha ho hata mariki kapa ho emetse lebone la sephethe-phethe

Fetola "Sleep Voltage" ho li-setting tsa sistimi ho ea ho COM mode - - ho emisa ka boits'oaro le koloi e nyalisitsoeng ea motlakase ea khase ka mokhoa o khethehileng

Likoloi tsa Hybrid li tla tima nakong ea ho khanna

1. Fetola "Sleep Voltage" litlhophisong tsa sistimi ho ea ho COM mode
2. Ho beha "Power-off Time" ho metsotsoana e 300 ka mokhoa oa ho beha, e le hore e ka tima ka mor'a metsotso e 5.
3. Haeba e sa rarolloe, ka kopo fetohela ho sistimi ea GPS ho bonts'a, tobetsa konopo ea '>' ho khetha sistimi nakong ea metsotsoana e 5 ea matla a ho sebetsa.

Ts'ebetso e fosahetseng e baka likotsi

1. Na ho na le lisebelisoa tse ling tsa OBD koloing ea hau (sensor ea ho paka, TPMS, fensetere ea senotlolo sa senotlolo, ELM27)
2. Haeba koloi ea hau e ne e fetotsoe 'me e kentsoe (ho tsamaea ka har'a taolo e bohareng, accelerator ea elektroniki, taolo ea maeto, sistimi ea khomphutha, ho qala senotlolo se le seng, ho kena ho se nang senotlolo, ho qala hole) ho tla baka likotsi, ho notlolla lisebelisoa tse ling tsa OBD ebe u sebelisa sehlahisoa sena. ka kotloloho ho khutlisetsa li-setting tsa feme (bona mokhoa oa ho seta)
3. Tobetsa nako e telele konopo ea'OK'key ho kenya li-menu tsa li-setting, tobetsa hakhutšoanyane'>' konopo ea ho fetohela ho li-setting tsa sistimi, tobetsa hakhutšoanyane'OK'ho kenya li-setting tsa sistimi, tobetsa hakhutšoanyane'>' senotlolo sa ho fetohela ho li-setting tsa feme, le tse khutšoane. tobetsa'OK'ho netefatsa. Haeba e sa rarolloa, ka kopo fetohela ho sistimi ea GPS 'me u sebelise thapo ea USB ho e hlahisa. Tobetsa'>'konopo ho khetha sistimi ea GPS nakong ea metsotsoana e 5 ha motlakase o buletsoe.

GPS FAQ

Ha ho letho skrineng, ha ho matla

Sheba hore na sehokelo sa USB se na le matla kapa khokahanyo e hlephile, e hule ebe u e hokela hape ka makhetlo a 'maloa, kapa u nke sebaka sa thapo ea USB.

Ha ho lebelo

GPS e ea phatsima ho batla linaleli. Ka kopo suthisa koloi tseleng e bulehileng. Pontšo ea GPS e kaholimo ho 5 e bolela hore e ka sebelisoa ka tloaelo feela kamora ho batla li-satellite tse 5

Ha e khone ho bulela kapa ho tima khafetsa nakong ea ho khanna

Ka kopo sebelisa thapo ea USB ho hokela lebone la sakerete Haeba u sebelisa thapo ea OBD, kenya li-setting tsa menu ho khetha"Sleep Vol.tage"'me u fetole boleng ba parametharatage ho 13.0V kapa 12.8V Haeba u sebelisa thapo ea USB, kenya li-setting menu ho khetha "Sleep Vol.tage"'me u sete boleng ba paramethara voltage ho OFF

Nako ea satellite e sa nepahalang

Kenya ntho ea ho seta: Tokiso ea Nako, tobetsa'>'konopo ho fetola nako ea sebaka sa nako, ka mor'a phetoho, tobetsa konopo e telele ho boloka le ho tsoa.

Lebelo le sa nepahaleng la koloi

1. Sheba hore na yuniti e nepahetse, lik'hilomithara KM/mile MPH (speed unit switch ka kopo sheba mokhoa oa li-setting "speed unit")
2. Ha koloi e tloha fekthering, moetsi o eketsa lebelo le bontšitsoeng ho dashboard ka 5-7%. Litekanyetso tsa machaba li ipapisitse le data ea sathelaete.
3. Beakanya lebelo la koloi, joalo ka sesebelisoa se bonts'ang 100 Km/h HUD ponts'o ea 105Km/h ho daela ho daela ho fetola boleng ba parametha ho 102.

Tsela e fosahetseng ea ho khanna

Lisathelaete ha li khone ho bala moo u khannang teng ha ho se lebelo. E tla tloaeleha ho fihlela >5KM/H

Lebelo le ntse le tsoela pele ka mor'a hore koloi e eme

Libaka tsa ho paka makoloi ka tlas'a lefatše, lithanele le litselana tse fetang ka holimo, ha ho e-na le litšitiso, pontšo e tla be e sa tsitsa. Lisathelaete li tla hoholeha. Ka kopo, khanna ho ea tseleng e bulehileng. Haeba palo ea li-satellite tse fumanoang li feta 5, e tla ba ntho e tloaelehileng.

Ha e khone ho tima ka bo eona ka mor'a hore koloi e koalehe

Ha thapo ea OBD e hokahantsoe, HUD e tla koala ka bo eona kamora metsotso ea 3 Haeba mochini o sa koaloe kamora metsotso e 5 kamora ho emisa lelakabe, fetola molumo.tage beha boleng ba paramente ho 13.5V (Sheba litlhophiso tsa menyu"Sleep Voltage ”) Kapa ntša thapo ea OBD ebe u sebelisa polaka ea thapo ea USB leboneng la sakerete

Litokomane / Lisebelisoa

wiiyii P6 Multi-Function Trip Computer [pdf] Bukana ea Mosebelisi P6 Multi-Function Trip Computer, P6, Multi-Function Trip Computer, Trip Computer, Computer

Litšupiso

• Bukana ea Mosebelisi