VERKADA AX11 IO Molaoli
Selelekela
Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa A, ho latela
ho karolo ea 15 ea melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi ha thepa e sebelisoa sebakeng sa khoebo.
Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Ho sebetsa ha thepa ena sebakeng sa bolulo ho ka 'na ha baka tšitiso e kotsi moo mosebedisi a tla hlokoa ho lokisa tšitiso eo ka litšenyehelo tsa hae.
Thepa ena ke ea ho sebelisoa sebakeng se thibetsoeng ho kena.
Tlhokomeliso: Netefatsa hore motlakase o khaotsoe ho AX11 pele o sebeletsa sehlahisoa kapa o hokela / o hakolla lisebelisoa.
Maemo a Taolo ea phihlello
- Boemo ba Tlhaselo/Kereiti: Mohato I
- Boemo ba Mamello/Kereiti: Mohato I
- Maemo/Kereiti ya Tshireletso ya Mola: Mohato I
- Boemo ba Matla a Standby/Kereiti: Boemo I
Firmware
Mofuta oa Firmware o ka netefatsoa le ho ntlafatsoa ho dashboard ea Taelo ho command.verkada.com.
AX11 Ho fetaview
Teko e khothalelitsoeng ea AX11
Ho netefatsa ts'ebetso e tsoelang pele ea AX11, ho khothaletsoa ho sheba likhokahano tse latelang likhoeling tse ling le tse ling tse 6:
- Khutšoanyane ho kenyelletsoa ka 'ngoe ho boema-kepe ba eona bo haufi ba COM 'me u netefatse hore mabone a LED
- Sebelisa multimeter ho netefatsa impedance e lebelletsoeng ho tsoa ho li-relay
- Nako e khutšoanyane ho pholletsa le NC le COM
- Bula ka mose ho NO le COM
- Sebelisa multimeter ho netefatsa aux voltage e fanoa ka liphetho tsa 12V
AX11 Boemo ba LED boits'oaro
Orange e tiileng
Controller e butsoitse 'me e qala
Orange e benyang
Molaoli o ntse a ntlafatsa firmware
Botala bo Benyang
Controller o laola lintho tse kenang le tse hlahisoang empa ha a khone ho fihla ho seva
Putsoa e tiileng
Controller o laola lintho tse kenang le tse hlahisoang 'me o hoketsoe ho seva
AX11 AC Power LED Boitšoaro
Botala bo tiileng
Matla a AC a fanoa ho molaoli
AX11 Litlhaloso tsa Tekheniki
|
Tšebeliso ea Matla |
60W Boholo |
|
|
Keletso ea AC Power |
110-240VAC
50-60Hz |
|
|
Lintho tse kenang |
16 Litlhahiso Tse Omileng Nominal 5VDC |
|
|
Pheta Outputs |
16 Dry Relays 1A/24VDC Contacts |
|
|
Matla a AUX |
Liphetho tse 2 tsa Kantle 1A/12V Matla a E 'ngoe le e 'ngoe ea 2A e Kopantsoeng Max | |
|
Litekanyo |
Le Mount
415.6mm (L) x 319.6mm (W) x 111.74 (H) |
Kantle ho Mount
415.6mm (L) x 319.6mm (W) x 105.74 (H) |
|
Boima ba 'mele |
8.3kg |
|
|
Mocheso oa ho sebetsa |
00C - 500C |
5-90% Mongobo |
|
Ho latela melao |
FCC, CE |
|
|
Khokahano |
Ethernet: 100/1000Mbps RJ-45 sehokelo sa thapo bakeng sa khokahano ea marang-rang USB 2.0 | |
|
Kenyellelitsoe Lisebelisoa |
Tataiso ea ho qala ka potlako, Kenya kit |
|
|
Mounting Options |
Li-drywall ankora (M8) le li-screw (M5) |
Ho phahamisa
Ho tlosa mounting plate, lokolla likurufu tse peli tsa tšireletso ea torx ka hare.
Hang ha li-screw tsa tšireletso li se li tlositsoe ka botlalo, thellela poleiti ea ho roala fatše 'me u e hole le sebaka se ka sehloohong.
Eketsa masoba a mane a 5/16” Ø leboteng. Kenya li-ankora tsa drywall ka har'a likoti. Kenya mounting plate leboteng ka ho kenya li-screws ka har'a liankora tsa leboteng.
Eketsa masoba a mane a 5/32” Ø leboteng. Kenya mounting plate leboteng ka ho kenya likurufu ka har'a masoba a tekolo.
Beha lesela la tšepe ka holim'a li-tab tsa mounting plate.
Tlama li-screws tse peli tsa tshireletso ho tiisa sekoahelo ho mounting plate.
Khothalletsa Wiring
Khokahano ea sebali sa likarete tsa AX11 e khona ho tšehetsa Babali ba Verkada ho feta RS-485 le babali ba tloaelehileng ba Wiegand. Tafole e latelang e bonts'a mefuta ea terata e khothaletsoang ho sebelisoa le AX11.
| Letshwao | AWG | Pair e sothehileng | Mokhanni | Sireletsa | Max Length |
| Reader Option 1 (Wiegand kapa AD31) |
22 |
Ee |
Ee |
250ft |
|
| Reader Option 2 (Wiegand kapa AD31) |
20 |
Ee |
Ee |
300ft |
|
| Reader Option 3 (Wiegand kapa AD31) |
18 |
Ee |
Ee |
500ft |
|
| Matla a 12V (22 Gauge) | 22 | Ee | Ee | 600ft | |
| Matla a 12V (18 Gauge) | 18 | Ee | Ee | 1500ft | |
| Lintho tse kenang | 22 | Ee | Ee | 1000ft | |
| Sehlahisoa se ommeng sa Relay | 18 | Ee | Ee | 1500ft |
Re khothaletsa ho sebelisa para e le 'ngoe e sothehileng bakeng sa GND le Vin (matla) le para e le 'ngoe e sothehileng bakeng sa data (D0/D1 kapa A/B).
Mekhoa ea likhoele e tla tsamaellana le Khoutu ea Naha ea Motlakase, ANSI/NFPA 70.
Shield Wiring le Grounding
Khokahano ea Ethernet le DHCP e tlameha ho sebelisoa ho hokahanya AX11 le Local Area Network (LAN). U boetse u hloka ho lokisa li-setting tsa firewall ho buisana le AX11.
- TCP boema-kepe 443
- UDP port 123 (kamahanyo ea nako ea NTP)
Ho kopanya li-peripherals
Mohanyetsi oa Moeli oa Hona Joale
Haeba peripheral e nang le motlakase e feta 10A, mochini o thibelang matla oa 10Ω o lokela ho sebelisoa ho netefatsa hore peripheral ha e fete boholo ba motlakase, e leng se ka sitisang ts'ebetso e tloaelehileng.
Max Line Resistance
Boemo bo phahameng ba ho hanyetsa mohala oa terata ea ho kenya e lokela ho ba ka tlase ho 100Ω, ntle le lihanyetsi tsa taolo ea ho qetela.
Matla a 12V
12V Output terminals e ts'ehetsa ho fihla ho 2A e kopaneng ea max.
Backup ea Battery
Betri e lokela ho lekana ho fana ka bonyane lihora tse 4 tsa ts'ebetso. AX11 e sebelisa 8.6W ha e na moroalo (ke hore, ha ho lintho tse kenang, tse hlahisoang, kapa libali tse hokahaneng).
Wiring ea Tšimo ea AC
Haeba matla a AC a tlisoa ka conduit, sehiloeng le terata ea splice e tlohang ho AC ho ea ho PSU.
Lintho tse kenang
AX11 e na le 16 Dry Contact Inputs. Lebitso la 5VDC. Khanyetso ea mela e lokela ho ba ka tlase ho 100Ω ho sa kenyelletsoa sehanyetsi sa EOL.
Pheta Outputs
AX11 e tla e na le li-relay tse 16 tsa Foromo ea C tse ka tsamaisoang li omme. Mojaro o moholo oa DC: 24V @ 1A, Max DC hajoale = 1A, Max DC voltage = 60VDC.
Ho hokela Sephetho
Tlhokomediso
Ho khothaletsoa ho hokahanya le Access Power Controller (APC) ho fana ka matla ho sesebelisoa. Haeba APC e lemoha hore AX11 relay e qalile, e tla qala ho fetisetsoa ha eona.
Ho ipapisitsoe le APC ea hau le senotlolo, sebopeho sa hau se ka fapana ho tloha ka holimo.
Ho hokahanya 'mali
Ho kenya Verkada kapa Wiegand Reader
AX11 e lekantsoe ho babali ba matla ho 12V ho fihla ho 250mA ka + Vin le - GND khokahano. Mohala o sirelelitsoeng oa thapo e sirelelitsoeng o lokela ho bolokoa sebakeng se haufi sa chassis sa AX11.
Sebali sa Verkada
Sebali sa Verkada
| Mobala oa Mohala | Letshwao |
| Khubedu | 12V Matla + |
| Ntsho | Matla a 12V - |
| Bopherese | A |
| Boputsoa | B |
Sebali sa Wiegand
| Mobala oa Mohala | Letshwao |
| Khubedu | 12V Matla + |
| Ntsho | Matla a 12V - |
| Botala | Boitsebiso 0 |
| Bosoeu/ Bohlooho | Boitsebiso 1 |
| Brown | LED e khubelu |
| namunu | LED e tala |
Backup ea Battery
Backup ea Battery
Betri ea 12V e ka hokeloa ho likhokahanyo tsa F2 tse tlase ho AX11. U ka kenya betri e le 'ngoe kapa tse peli ka tlase ho AX11.
Re khothaletsa le ho rekisa 12 Volt 4.5 Ah Sealed Lead Acid Rechargeable battery.
Haeba u sebelisa libeteri tse peli, etsa bonnete ba hore li hokahantsoe ka tsela e tšoanang.
Hokela
Hokela AX11 ho netweke ea hau u sebelisa e 'ngoe ea likou tsa Ethernet tse tlase ho molaoli. Haeba u kenya li-controller tse ngata, u ka hokela li-controller tse ling tse 4 ka "spare Ethernet port" ho molaoli ka mong.
Hokela phepelo ea motlakase ea AX11 sebakeng sa hau sa motlakase se tloaelehileng (120 VAC)
Litokomane / Lisebelisoa
 |
VERKADA AX11 IO Molaoli [pdf] Tlhophiso Tataiso AX11 IO, Controller, AX11 IO Controller |
 |
VERKADA AX11 IO Molaoli [pdf] Tlhophiso Tataiso AX11 IO, Controller, AX11 IO Controller |
