Sensor ea UNI-T UT387A Stud

Tlhokomeliso:
Ka kopo bala bukana ka hloko pele u e sebelisa. Ela hloko melao ea polokeho le litemoso tse bukeng ea ho sebelisa Sensor ea Stud hamolemo. Khampani e na le tokelo ea ho fetola bukana.

Sensor ea UNI-T Stud UT387A

1. Stud Edge V Groove
2. Letšoao la LED
3. Sesupo sa ho Fumana AC Live
4. Target Pontšo Bars
5. Mokhoa oa StudScan
6. Letšoao la "CAL OK".
7. Mokhoa oa ThickScan
8. Mokhoa oa ho Fetoha
9. Konopo ea Matla

Kopo

Stud Sensor UT387 A Application (Indoor drywall):

UT387 A e sebelisoa haholo ho bona lepolanka, tšepe ea tšepe, le lithapo tsa AC tse ka morao ho drywall.

Hlokomela:
Botebo ba ho lemoha le ho nepahala ha UT387 A li angoa ke lintlha tse kang mocheso le mongobo o teng, sebopeho, ho teteana le mongobo oa lebota, mongobo le bophara ba stud, ho kobeha ha stud edge, joalo-joalo. UT387 A ka khona ho hlahloba ka katleho lisebelisoa tse latelang tsa lebota:

• Drywall, plywood, fatše lehong le thata, lerako la lepolanka le koahetsoeng, wallpaper.
• UT387A ha e etselitsoe ho skena lisebelisoa tse latelang tsa lebota: Likhapete, lithaele kapa mabota a tšepe.
• Lintlha tsa Tekheniki (Boemo ba teko: 2o·c – 2s·c , 35-55%RH):
• Betri: 9V Alkaline betri
• Mokhoa oa StudScan: 19mm (botebo bo boholo)
• Mokhoa oa ThickScan: 28.5mm (botebo bo tsitsitseng ba ho lemoha)
• Live AC Wire (120V 60Hz/220V 50Hz): 50mm (max)
• Ho fumana betri e tlase: Haeba betri e le matlatage tlase haholo ha motlakase o buletsoe, sesebelisoa se tla romela alamo ea phoso, 'me li-LED tse khubelu le tse tala li tla benya ka tsela e fapaneng le buzzer.
• beeping, betri e hloka ho nkeloa sebaka.
• Phoso ea ho hlahloba kapele (feela ka mokhoa oa StudScan): Ha ho e-na le lehong kapa ntho e nang le boima bo phahameng ka tlas'a sebaka sa ho hlahloba, sesebelisoa se tla romela alamo ea phoso, 'me li-LED tse khubelu le tse tala li tla benya ka tsela e fapaneng ka molumo oa molumo.
• Thempereichara ea ho sebetsa: -19°F~120″F (-TC~49″C)
• Mocheso oa polokelo: -4 'F~150″F (-20″C~66°C)

Mehato ea Ts'ebetso

Ho kenya Battery:
Joalokaha ho bontšitsoe setšoantšong, sutumelletsa tabong ea lemati la betri ea sesebelisoa ebe u bula lemati. Kenya betri e ncha ea 9-volt, e tsamaellanang le matšoao a matle le a fosahetseng ka morao. Kenya betri sebakeng ebe u koala lemati. O SE KE oa hatella betri ka matla haeba betri e le sieo.

Ho lemoha Wood Stud

1. Tšoara UT387 A 'me u e behe e otlolohile 'me e bataletse leboteng.
   Tlhokomeliso: Qoba ho ts'oara holim'a setopo sa menoana, 'me u tšoare sesebelisoa se bapa le li-studs. Boloka sesebelisoa se bataletse ka holim'a metsi, u se ke ua se hatella ka matla, 'me u se ke ua sisinya kapa ua sekamisa sesebelisoa.
2. Khetha mokhoa oa ho utloa, 'me u tsamaise sekhetho ho ea ka ho le letšehali bakeng sa StudScan le ho le letona bakeng sa ThickScan.
   Hlokomela: Khetha mokhoa oa ho utloa ho latela botenya bo fapaneng ba lebota. Bakeng sa mohlalaample, khetha mokhoa oa StudScan ha botenya ba drywall bo le ka tlase ho 20mm, ebe u khetha mokhoa oa ThickScan ha o feta 20mm.
3. Calibration: Tobetsa 'me u tšoare konopo ea matla, sesebelisoa se tla iteka ka bohona. (Haeba buzzer e lla ka tatellano, e bonts'a matla a tlase a betri, khutlisetsa betri 'me u bulele matla a ho lekanya bocha). Nakong ea ts'ebetso ea auto-calibration, LED e tala e benya ho fihlela calibration e phethoa. Haeba ho lekanya ho atlehile, LCD e tla bontša letšoao la "StudScan" / "ThickScan" + "CAL OK" 'me u ka qala ho sebelisa sesebelisoa ho hlahloba lehong.
   Hlokomela:
   Nakong ea calibration, boloka sesebelisoa se bataletse leboteng, u se ke ua reketla kapa ua sekama. Qoba ho beha letsoho la hao le leng, kapa karolo efe kapa efe ea 'mele oa hau e ntse e hlahlojoa. Metsotsoana e seng mekae ka mor'a ho lekanya, haeba li-LED tse khubelu le tse tala li lula li benya ka tsela e fapaneng 'me buzzer e ntse e lla ka ho sa khaotseng, lokolla konopo ea matla 'me u fetohele sebakeng se seng (5-10cm ho tloha sebakeng se fetileng) ho fetola mokhoa oa ho lokisa. Ha u hlahloba patsi ka mokhoa oa StudScan 'me sesebelisoa se romela alamo ea phoso e nang le li-LED tse khubelu le tse tala tse khanyang ka ho feletseng le molumo oa molumo, ho bontša hore ho na le patsi kapa ntho e nang le boima bo phahameng ka tlas'a sebaka sa ho hlahloba, mosebedisi o tlameha ho lokolla konopo ea matla le ho fetola. ho ea sebakeng se seng (5-10cm hole le boemo bo fetileng) ho khutlisetsa tekano.
4. Tsoela pele ho tšoara konopo ea matla, ebe u thellisa sesebediswa butle
   ho sekena leboteng. Ha e ntse e atamela stud, sesupo sa sepheo
   mekoallo e tla hlaha ho LCD.
5. Ha lits'oants'o tse bonts'itsoeng li tletse, LED e tala e butsoitse 'me molumo oa buzzer, tlase ea V groove e lumellana le moeli o le mong oa stud, o ka e tšoaea ka lets'oao.
6. Se ke oa lokolla konopo ea matla 'me u tsoele pele ho skena ka tsela ea mantlha. Ha lits'oants'o tse bonts'itsoeng li theoha 'me li khutlela holimo hore li tlale hape, LED e tala le buzzer li tla be li le teng ka bobeli, tlase ea V groove e lumellana le moeli o mong oa stud, e tšoaee fatše le bohareng ba matšoao ana a mabeli. ke bohareng ba stud.

Ho fumana Lithapo tsa AC tsa Live

Ka bobeli mekhoa ea StudScan le ThickScan e khona ho bona lithapo tsa AC tse phelang, sebaka se phahameng sa ho lemoha ke 50mm. Ha sesebelisoa se lemoha terata e phelang, letšoao la kotsi e phelang le hlaha ho LCD 'me lebone le lefubelu la LED le khantšitsoe.

Hlokomela:

• Hlokomela: Lithapo tse sirelelitsoeng, lithapo ka har'a lipeipi tsa polasetiki, kapa lithapo tse kahare
  marako a tšepe a ke ke a bonoa.
• Hlokomela: Ha sesebelisoa se lemoha mefuta e 'meli ea lehong le lithapo tsa AC tse phelang ka nako e le' ngoe, se tla khantša LED e khubelu pele.

Tlhokomeliso:
Se ke oa nahana hore ha ho na lithapo tsa AC tse phelang leboteng. Se ke oa etsa lipekere tsa kaho kapa tsa hamore pele o tima motlakase.

Tlhokomelo le Hloekileng

Hloekisa sensor ea stud ka lesela le omileng le le bonolo. U se ke ua e hloekisa ka li-detergents kapa lik'hemik'hale tse ling. Sesebelisoa se fetile litekong tse matla tsa boleng pele se tlisoa. Haeba ho na le bothata bo itseng ba ho etsa thepa, ka kopo ikopanye le moemeli oa hau oa thekiso ea lehae. U se ke ua qhaqha le ho lokisa sehlahisoa ka bouena.

Ho Lahla Litšila
Sesebelisoa se senyehileng le sephutheloana sa sona se tla sebelisoa hape ho latela litlhoko tsa lehae tsa ts'ireletso ea tikoloho.

UNI-TREND TECHNDLDGIV (CHINA) CD., LTD.

No6, Gong Ye Bei 1st Road, Songshan Lake National High-Tech Industrial Development Zone, Motse oa Dongguan, Profinseng ea Guangdong, China Mohala: (86-769) 8572 3888 http://www.uni-trend.com.

Litokomane / Lisebelisoa

Sensor ea UNI-T UT387A Stud [pdf] Bukana ea Mosebelisi UT387A, Sensor ea Stud, Sensor ea UT387A Stud, Sensor

Litšupiso

• Bukana ea Mosebelisi