P/N110401707524X LETSATSI:2018.06.26 REV.1
UT387A Stud Sensor UT387A Bukana ea Mosebelisi
Tlhokomeliso: Ka kopo bala bukana ka hloko pele u e sebelisa. Ela hloko melao ea polokeho le litemoso tse bukeng ea ho sebelisa Sensor ea Stud hamolemo. Khampani e na le tokelo ea ho fetola bukana.

Sensor ea UNI-T Stud UT387A

1. Stud Edge V Groove
2. Letšoao la LED
3. Sesupo sa ho Fumana AC Live
4. Target Pontšo Bars
5. Mokhoa oa StudScan
6. Letšoao la “CAL OK'
7. Mokhoa oa ThickScan
8. Mokhoa oa ho Fetoha
9. Konopo ea Matla

Sensor ea Stud UT387A
Tšebeliso (ka hare ho drywall):
UT387A e sebelisoa haholo ho bona lepolanka, tšepe ea tšepe, le lithapo tsa AC tse ka morao ho drywall.
Hlokomela: Botebo ba ho lemoha le ho nepahala ha UT387A ho angoa ke lintlha tse kang mocheso le mongobo oa tikoloho, sebopeho, ho teteana le mongobo oa lebota. mongobo le bophara ba sekoti, ho kobeha ha motsu. joalo-joalo UT387A e ka hlahloba ka katleho lisebelisoa tse latelang tsa lebota: Drywall, plywood, fatše lehong le thata, lerako la lepolanka le koahetsoeng, wallpaper.
UT387A ha e etselitsoe ho skena lisebelisoa tse latelang tsa lebota: Likhapete, lithaele, mabota a tšepe. Lintlha tsa Tekheniki (Boemo ba Teko: 20″C – 25″C , 35-55%RH): Betri: 9V Alkaline battery StudScan Mode: 19mm (botebo bo boholo) ThickScan Mode: 28.5mm (botebo bo tsitsitseng ba ho lemoha) Live AC Wires (120V 60Hz) /220V 50Hz): 50mm (max) Ho fumana betri e tlase: Haeba betri e le matlatage tco e tlase ha motlakase o buletsoe, sesebelisoa se tla romela alamo ea phoso, 'me li-LED tse khubelu le tse tala li tla khanya ka tsela e fapaneng ka ho lla ha buzzer, betri e hloka ho nkeloa sebaka. Phoso ea ho hlahloba kapele (feela ka mokhoa oa StudScan): Ha ho e-na le lehong kapa ntho e nang le boima bo phahameng ka tlas'a sebaka sa ho hlahloba, sesebelisoa se tla romela alamo ea phoso, 'me li-LED tse khubelu le tse tala li tla khanya ka ho feletseng ka buzzer beeping. Mocheso oa ho sebetsa: -19-F-120IF (-7'C-49'C) Mocheso oa polokelo: -4″F-150'F (-20'C-66'C)

Mehato ea ts'ebetso:

A. Ho kenya Battery: Joalokaha ho bontšitsoe setšoantšong, sutumelletsa tabeng ea lemati la betri ea sesebelisoa ebe u bula lemati. Kenya betri e ncha ea 9-volt, e tsamaellanang le matšoao a matle le a fosahetseng ka morao. Kenya betri sebakeng ebe u koala lemati. O SE KE oa hatella betri ka matla haeba betri e se teng.
B. Ho Fumana Stud ea Lehong.

1. Tšoara UT387A 'me u e behe ka ho otloloha' me u fiat leboteng.
     Tlhokomeliso: Qoba ho itšoarella holim'a setopo sa menoana, tšoara sesebelisoa se bapa le lithupa. Boloka sesebelisoa se bataletse khahlano le bokaholimo. u se ke ua e hatella ka thata, 'me u se ke ua sisinya kapa ua sekamisa sesebelisoa.
2. Khetha mokhoa oa ho utloa, suthela sekhetho ho ea ka letsohong le letšehali bakeng sa StudScan le ho le letona bakeng sa ThickScan. S Hlokomela: Khetha mokhoa oa ho utloa ho latela botenya bo fapaneng ba ntoa. Bakeng sa mohlalaample, khetha mokhoa oa StudScan ha botenya ba drywall bo le ka tlase ho 20mm, khetha mokhoa oa ThickScan ha o feta 20mm.
3. Calibration: Tobetsa 'me u tšoare konopo ea matla, sesebelisoa se tla iteka ka bohona. (Haeba buzzer e lla ka tatellano, e bonts'a matla a tlase a betri, khutlisetsa betri 'me u bulele matla a ho lekanya bocha). Nakong ea ts'ebetso ea auto calibration. Lebone le letala la LED ho fihlela tlhahlobo e phethiloe. Haeba tlhahlobo e atlehile, LCD e tla hlahisa letšoao la "StudScan-/ ” ThickScan” + 'CAL OK' 'me u ka qala ho sebelisa sesebelisoa ho sekena patsi.
   Ela hloko: Nakong ea ho lekanya, boloka sesebelisoa se bataletse leboteng. o seke wa reketla kapa wa tshekeha. Qoba ho beha letsoho la hao le leng, kapa karolo efe kapa efe ea 'mele oa hau e ntse e hlahlojoa. Metsotsoana e seng mekae ka mor'a ho lekanya, haeba li-LED tse khubelu le tse tala li lula li benya ka tsela e fapaneng 'me buzzer e ntse e lla ka ho sa khaotseng, lokolla konopo ea matla 'me u fetohele sebakeng se seng (5-10cm ho tloha sebakeng se fetileng) ho khutlisetsa tekanyo.
   Ha u hlahloba patsi ka mokhoa oa StudScan le alamo ea phoso ea sesebelisoa sa titan e nang le li-LED tse khubelu le tse tala tse khanyang ka tsela e fapaneng le molumo oa molumo oa lentsoe, ho bontša hore ho na le lehong kapa ntho e nang le boima bo phahameng ka tlas'a sebaka sa ho hlahloba, mosebedisi o tlameha ho lokolla konopo ea matla le ho fetohela ho e 'ngoe. boemo (bohole ba 5-10ao ho tloha boemong bo fetileng) ho etsa tekanyo hape.
4. Tsoela pele ho bolella konopo ea matla, ebe butle thellela sesebelisoa ho sekena leboteng. Ha e ntse e atamela stud, libaka tse bontšang sepheo li tla hlaha ho LCD.
5. Ha lits'oants'o tse bonts'itsoeng li tletse, LED e tala e butsoitse 'me molumo oa buzzer, tlase ea V groove e lumellana le moeli o le mong oa stud, o ka e tšoaea ka lets'oao.
6. Se ke oa lokolla konopo ea matla 'me u tsoele pele ho skena ho Erection ea mantlha. Ha lits'oants'o tsa sepheo li theoha 'me li khutlela holimo hore li tlale hape, LED e tala le buzzer WI ka bobeli li ntse li le teng, tlase ea V groove e lumellana le pheletsong e' ngoe ea stud, e tšoaee fatše 'me bohareng ba matšoao ana a mabeli ke. sebaka se bohareng ba motsu.

C. Ho Fumana Lithapo tsa AC tse Phelang

Ka bobeli mekhoa ea StudScan le ThickScan e khona ho bona lithapo tsa Ike AC. sebaka se phahameng sa ho lemoha ke 50mm. Ha sesebelisoa se lemoha terata e phelang. letshwao la kotsi e phelang le hlaha ho LCD mme lebone le lefubedu la LED le butswe.
Hlokomela: Lithapo tse sirelelitsoeng. lithapo tse ka har'a liphaephe tsa polasetiki, kapa lithapo tse maboteng a tšepe li ke ke tsa bonoa.
Hlokomela: Ha sesebelisoa se lemoha lithapo tse peli tsa lehong le tsa AC ka nako e le 'ngoe, se tla khantša LED e khubelu pele.
Tlhokomeliso: Se ke oa nahana hore ha ho na lithapo tsa AC tse phelang leboteng. Se ke oa kena ka har'a li-naits tsa kaho kapa tsa hamore pele o tima motlakase.

Tlhokomelo le Hloekileng

Hloekisa sensor ea stud ka lesela le omileng le le bonolo. U se ke ua e hloekisa ka li-detergents kapa lik'hemik'hale tse ling. Sesebelisoa se fetile litekong tse matla tsa boleng pele se tlisoa. Haeba ho na le bothata bo itseng ba ho etsa thepa, ka kopo ikopanye le moemeli oa hau oa thekiso ea lehae. U se ke ua qhaqha le ho lokisa sehlahisoa ka bouena.

Ho Lahla Litšila

Sesebelisoa se senyehileng le sephutheloana sa sona se tla sebelisoa hape ho latela litlhoko tsa lehae tsa ts'ireletso ea tikoloho.

UNI-T
UNI-TRENO TECHNOLOGY , CHINA CO., LTD. Nob. Gong Ye &slat Road. songshan Lake National Hig
Tech Industrial Development Zone, Dongguan GIs Profinseng ea Guangdong.
China

Mohala: (86-769)85723888
http://www.unit-trend.com

Litokomane / Lisebelisoa

Sensor ea UNI-T UT-387A Stud [pdf] Bukana ea Mosebelisi UT-387A, UT-387A Stud Sensor, Stud Sensor, Sensor

Litšupiso

• Bukana ea Mosebelisi