LM32DA Digital Angle Meter
Bukana ea Mosebelisi
LM32DA/LM32DB
Digital Angle Me七er Bukana ea Mosebelisi
Tlhaloso ea Sehlahisoa
| 1 | Boemo ba betri |
| 2 | REF e amanang le zero |
| 3 | Sehlahisoa se sekametseng tataiso |
| 4 | Laser |
| 5 | Phetoho ea yuniti (ho/ft; mm/m) |
| 6 | ABS tshekaletseng zero |
| 7 | Yuniti ya gradient (%!°) |
| 8 | Data hold |
| 9 | Sephetho sa tekanyo |
| 10 | Konopo ea matla / laser |
| 11 | Konopo ea REF/ABS/calibration |
| 12 | Konopo ea ho ts'oara / ho fetola likarolo |
| 13 | Mofuta oa C oa ho tjhaja |
| 14 | Laser emission aperture (LM320B) |
Tshebetso
Matlafatsa:
Ha mitha e sa buloa, tobetsa hakhutšoanyane 
ho matlafatsa.
Ho tima:
Ha mitha e buletsoe, tobetsa nako e telele ho tima.
Laser (LM320B feela)
Kamora ho bulela mithara, tobetsa hakgutshwane ho hata ka har'a: bulela laser-lehlakoreng le letšehali> bulela laser e lehlakoreng le letona> tum holim'a li-lasers ka mahlakoreng ka bobeli> tima li-lasers ka mahlakoreng ka bobeli.
Tekanyo ea angle:
Ha mitha e buletsoe, e behe sebakeng se sekametseng. Boleng bo bontšitsoeng skrineng ke sekhutlo pakeng tsa sebaka se sekametseng le sefofane se rapameng. 
REF (mokhoa oa boleng bo amanang):
Tobetsa nakoana ho kenya mokhoa oa boleng bo lekanyelitsoeng (seta boleng ba tekanyo ea hajoale ho 0). Tobetsa nakoana hape ho tsoa ho mokhoa ona.
Calibration:
Beha sehlahisoa se otlolohile sebakeng se bataletseng, se boreleli joalokaha ho bontšitsoe setšoantšong sa 1. Tobetsa nako e telele, "1" e tla hlaha skrineng (Setšoantšo sa 2). Tobetsa e khutšoanyane
ho tsoela pele mohatong o latelang (setšoantšo sa 3). Fetola sehlahisoa 180 ° sebakeng se le seng (Setšoantšo sa 4). Tobetsa e khutšoanyane ho phethela sekala. 
Ho boloka lintlha:
Tobetsa e khutšoanyane
ho emisa data ea hajoale ea tekanyo.
Tobetsa e khutšoanyane hape ho tsoa ts'ebetsong ena. 
Phetoho ea yuniti:
Tobetsa nako e telele ho fetolela yuniti (yuniti ea kamehla: 0). Litsela tse ling tse ka khethoang: mm/m, %, in/ft. 
Ho tjhaja:
Ha pontshi ea betri e tlase 
e bonts'a hukung e kaholimo ho le letona la skrini, ka kopo sebelisa thapo ea ho tjhaja e khomaretsoeng ho tjhaja sehlahisoa. 
Litlhaloso
| Mohlala | LM320A | {LM320B |
| Lekhalo la litekanyo | 4 * 90 ° | |
| Ho nepahala | ± (0.2°) | |
| Qeto | 0.01° | |
| Laser | / | Li-laser tse mahlakoreng a mabeli |
| Mocheso oa ho sebetsa | 0-50°C | |
| Pontšo | EBTN, e nang le khanya e ka morao | |
| Betri | 3.7V 300mAh lithium betri | |
| Sehokelo sa ho tjhaja | Mofuta oa USB oa C | |
| Bophelo ba betri | 2h | |
| Motheo oa makenete | Limanete tse mahlakoreng a mabeli | Limanete tse mahlakore a mane |
| Lisebelisoa tsa foreimi | Motsoako oa aluminium | |
| Tekanyo e lekanyelitsoeng/e felletseng | -,./ | |
| Senotlolo | -,./ | |
| Pontšo ea betri e tlase | -,./ | |
| Motlakase o tima | metsotso e 5 | |
| Boholo ba sehlahisoa | 61*61*31 limilimithara | |
| Lisebelisoa tse tloaelehileng | Angle meter: 1pc, thapo ea USB: 1pc, buka ea mosebelisi: 1pc, poleiti ea motheo: 1pc | |
Litemoso
- Ka kopo u se ke ua sebelisa lihlapolli tsa tlhaho ho hloekisa sehlahisoa sena.
- Ka kopo sebelisa lesela le bonolo ho hloekisa litšila ho qoba ho senya bokaholimo ba sehlahisoa.
- Metara e tla tima ka bo eona haeba ho se na konopo ea konopo bakeng sa metsotso e 5
UNI-TREND TECHNOLOGY (CHINA) CO., LTD.
Che. 6, Gong Ye Bei 1st Road,
Liindasteri tsa theknoloji e phahameng ea Songshan Lake
Nts'etsopele, Motse oa Dongguan,
Profinseng ea Guangdong, Chaena 
Litokomane / Lisebelisoa
 |
UNI-T LM32DA Digital Angle Meter [pdf] Bukana ea Mosebelisi LM32DA, LM32DB, LM32DA Digital Angle Meter, Digital Angle Meter, Angle Meter, Meter |