User Manual for UNI-T models including: LM32DA, LM32DB, LM32DA Digital Angle Meter, Digital Angle Meter, Angle Meter, Meter
Unit conversion: Long press画toconvert the unit (default unit: 0).Other selectable urnts: mm/m, %, in/ft. Specifications Model LM320A Measurement range Accuracy Resolution Laser ／ Operating temperature
eManual download – UnitsDirect
UNI-,: LM32DA/LM32DB Digital Angle Meer User Manual Product Description Angle measurement: When the meter is turned on, place it on an inclined surface. The value displayed on the screen is the angle between the inclined surface and the horizontal plane. :W) 1 Battery status 2 REF relative zero 3 Product tilt direction 4 Laser 5 Unit conversion (in/ft; mm/m) 6 ABS horizontal zero 7 Gradient unit (%!°) 8 Data hold 9 Measurement result 10 Power/laser button 11 REF/ABS/calibration button 12 Data hold/unit conversion button 13 Type-C charging interface 14 Laser emission aperture (LM320B) REF (relative value mode): Short press to enter the relative value mode (set the current measurement value to 0). Short press§again to exit this mode. Enter the relative Relative value Absolute value value mode mode icon mode icon Calibration: Place the product upright on a flat, smooth surface as shown in Figure 1. Long press, "1"will show on the screen (Figure 2). Short pressto proceed to the next step (Figure 3). Rotate the product 180° in the same position (Figure 4). Short pressto complete the calibration. Operation Power on: When the meter is not turned on, short press [il to power on. Power off: When the meter is turned on, long press [il to power off. Laser (LM320B only) After turning on the meter, short press[i)to step through: turn on the left-side laser> turn on the right-side laser >tum on the lasers on both sides> turn off the lasers on both sides. Figure 1 Figure 2 Figure 3 Figure 4 Data hold: Short press§to freeze the current measurement data. Short press§again to exit this function. Data hold icon Left-side laser (LM320B) Right -side laser (LM320B) Unit conversion: Long press to convert the unit (default unit: 0). Other selectable urnts: mm/m, %, in/ft. Charging: When the low battery indicator :::::::J shows on the upper right corner of the screen, please use the attached charging cable to charge the product. Specifications Model Measurement range Accuracy LM320A Type-C charging interface I 4*90 ° (0.2°) LM320B Resolution Laser Operating temperature 0.01° I Two-side lasers 0-50 ° C Display EBTN, with backlight Battery 3.7V 300mAh lithium battery Charging interface USB Type C Battery life Magnet base Frame material Two-side magnets 2h I Aluminum alloy Four-side magnets Relative/absolute measurement Angle lock Low battery indication Auto power off 5 minutes Product size 61*61*31mm Standard accessories Angle meter: 1pc, USB cable: 1pc, user manual: 1pc, base plate: 1pc Cautions 1. Please do not use organic solvents to clean this product. 2. Please use a soft cloth to clean the dirt to avoid damaging the surface of the product. 3. The meter will power off automatically if no button press occurs for 5 minutes UNIT UNI-TREND TECHNOLOGY (CHINA) CO., LTD. No. 6, Gong Ye Bei 1st Road, Songshan Lake National High-Tech Industrial Development Zone, Dongguan City, Guangdong Province, ChinaCorel PDF Engine Version 14.0.0.701