TSI SureFlow 8681 Adaptive Offset Controller

Litlhaloso

• Lebitso la Sehlahiswa: SureFlow TM Adaptive Offset Controller
• Mohlala: 8681
• Tlhokahalo ea MatlaTlhaloso: 24 VAC

Litaelo tsa Tšebeliso ea Sehlahisoa

Kemiso ea Karolo:
Sheba litšoantšo tsa moaho tse fanoeng bakeng sa sebaka sa dampers, liteishene tsa phallo, le sensor ea khatello. Haeba ho se sebaka se hlalosoang, latela libaka tse tloaelehileng tsa ho kenya joalo ka ha ho bontšitsoe litaelong.

Lethathamo la Likarolo:
Netefatsa hore o na le likarolo tsohle tse hlokahalang tse thathamisitsoeng bukeng ea ho instola.

Kemiso ea Digital Interface Module:

1. Khetha sebaka sa ho kenya DIM.
2. Kenya lebokose la motlakase la lihlopha tse peli tse tloaelehileng.
3. Tlosa li-screws tse tšoereng lisebelisoa tsa elektronike setsing ebe u beha motheo lebokoseng la motlakase.
4. Sheba litšoantšo tsa lithapo bakeng sa likhokahano tse nepahetseng tsa lithapo ho DIM le lisebelisoa tse ling.
5. Beha DIM ka mokhoa o sireletsehileng botlaaseng 'me u e koahele.

Litaelo tsa Wiring:
Netefatsa hore ke VAC e 24 feela e hokeletsoeng ho terminal efe kapa efe. U se ke ua sebelisa voltage ho liphetho tse itseng ho thibela tšenyo ea yuniti.

LBH

• Ke lokela ho etsa eng haeba ka phoso ke hokela yuniti ho 110 VAC?
  Ho kenya terata ho 110 VAC ho tla baka tšenyo e kholo le ho hlakola waranti. Ka kopo, etsa bonnete ba hore o e hokahanya ka terata ho 24 VAC feela joalokaha ho boletsoe bukeng ea tataiso.
• Ke fumana joang sebaka sa ho hlongoa bakeng sa likarolo?
  Sheba litšoantšo tsa mohaho tse fanoeng le sehlahisoa. Haeba ho sa hlalosoa sebaka se itseng, latela libaka tse tloaelehileng tsa ho instola tse bontšitsoeng bukeng ea tataiso.

TLHOKOMELO
Model 8681 Adaptive Offset Controller e tlameha ho hokelloa ka terata ho 24 VAC feela. Ho kenya terata ho 110 VAC ho tla baka tšenyo e kholo ea yuniti le ho hlakola waranti.
Litaelo tsena tsa ho kenya li tataisa motho ea kenyang hore a kenye TSI® Model 8681 SureFlow™ Adaptive Offset Controller le likhetho tsohle tsa TSI®. Likhetho tse ling e kanna eaba ha lia fanoa ke TSI®, ka hona, ka kopo hapeview litaelo tseo tsa ho kenya lihlahisoa. Ka kopo bala litaelo tsena ka botlalo pele u qala ho kenya.

Fetileview

Setšoantšo sa 1 se fana ka sephethoview ea likarolo tse fapaneng tse kentsoeng. Taelo ea likarolo tse kentsoeng ha e bohlokoa. Litšoantšo tsa moaho li tla hlalosa sebaka sa dampers, liteishene tsa phallo, le sensor ea khatello. Haeba ho se sebaka se hlalosoang, litaelo tsena li bonts'a libaka tse "tloaelehileng" tsa ho kenya.

Lethathamo la likarolo

HLOKOMELA 

• Ho na le mefuta e mengata ea likhetho tse ka kengoang le Adaptive Offset Controller. Sistimi eo u e kenyang e kanna ea ba kapa ha e na likarolo tsohle kapa bongata ba likarolo tse thathamisitsoeng ka tlase.
• Ke lisebelisoa tse fanoeng ke TSI feela, tse thathamisitsoeng ka tlase le leqepheng le latelang, tse kenyellelitsoeng litaelong tsena tsa ho kenya.
• Ka kopo, sheba litaelo tsa ho instola tsa moetsi bakeng sa ho kenya ka nepo lisebelisoa tseo e seng tsa TSI.

Adaptive Offset Controller

Liteishene tsa Phallo (Yuniti ka 'ngoe) 

Karolo Nomoro	Qty	Tlhaloso
HA HO MOTHO	1	Seteishene sa phallo - boholo ho isa ho duct (Letšoao la Air Monitor)
804139	1	Pressure Transducer (Letshwao la MAMAC)
800420	1	Transformer
800414	2	Transformer cable - mohala oa bobeli ke oa tlhahiso ea seteishene sa phallo

Dampers / Actuators (Yuniti ka 'ngoe)

Karolo Nomoro	Qty	Tlhaloso
Ha ho letho	1	Damper - boholo bakeng sa kotopo
800420	1	Transformer
800414	2	Transformer cable - cable ea bobeli ke ea pontšo ea taolo
800370	1	Sesebelisoa sa motlakase

Ho kengoa ha Mojule oa Digital Interface

1. Kgetha sebaka sa ho hlopha Digital Interface Module (DIM). Hangata lipolane tsa kaho li bontša sebaka sa ho hlongoa. Haeba ho se sebaka se boletsoeng, yuniti e tla kenngoa joalo ka ha ho bonts'itsoe setšoantšong sa 1, ebang ke laboratoring kapa phasejeng.
2. Kenya lebokose le tloaelehileng la motlakase oa lihlopha tse peli (4" x 4").
3. Thelelisa sekoaelo sa DIM ka ho le letona 'me u tlose li-screw tse tharo tse tšoereng lisebelisoa tsa elektroniki botlaaseng (setšoantšo sa 2). Tlosa setsi.
4. Seketsa setsi ho lebokose la motlakase la 4" x 4" (li-screw ha li kenyelelitsoe). Motsu oa motheo oa "LEHLAKO LA ENA" o tlameha ho supa nqa siling.
5. Sheba litšoantšo tsa lithapo bakeng sa lithapo tse nepahetseng (Setšoantšo sa 10 le Setšoantšo sa 11). Lithapo li felisitsoe ka bobeli ho DIM, le sesebelisoa se loketseng.
6. Ka hloko sutumelletsa lithapo ka har'a lebokose la motlakase 'me u kenye DIM. Kenya hape li-screw tse tharo ho ts'oara DIM ka tieo ho theosa. Kenya sekwahelo 'me u thellele ka ho le letšehali ho pata pontšo.
   HLOKOMELA
   Li-screw tse peli li patiloe ka mor'a sekoahelo ha li bulehile ka botlalo. Sekoahelo se tla thellela ka ho le letona hoo e ka bang 2 inches ho fihlela setopo se otloa. Hula sekoaelo ho tlosa ka botlalo ho lisebelisoa tsa elektroniki le ho pepesa li-screw.

Wiring

TLHOKOMELO

• U SE KE UA hokela ho feta 24 VAC ho terminal efe kapa efe.
• U SE KE UA sebetsa voltage ho tlhahiso ea RS-485, tlhahiso ea analog, kapa tlhahiso ea taolo. Tšenyo e kholo e ka hlaha yuniti haeba voltage sebelisoa.

TLHOKOMELO
E mong le e mong damper/actuator le flow station e na le transformer e arohaneng e lokelang ho kengoa. U SE KE UA terata lisebelisoa tse fetang bonngoe ka transformer.

1. Tlosa likhokahano ka morao ho DIM.
2. Sheba Setšoantšo sa 10 le setšoantšo sa 11 sa terata bakeng sa sensor ea khatello, DIM, TSI® D.amper/actuator, le mehala ea TSI® flow station. Sheba setšoantšo sa 12 sa terata bakeng sa likhoele tsa transfoma.
   HLOKOMELA
   Haeba likhetho tse ling li hloka ho kengoa mehala, kapa likarolo tse sa hlokeng TSI® li hloka mohala, bua ka mehaho e hatisitsoeng bakeng sa setšoantšo se nepahetseng sa wiring.
3. Hlakola 1/4 "ho isa ho 3/8" ho tloha lithapong. Sotha terata e kholehileng ho felisa likhoele tse hlephileng.
4. Kenya terata sehokelong ebe o tiisa.
5. Kenya sehokelo ka har'a sehokelo se nepahetseng.

Ho kenya Sensor ea Khatello

HLOKOMELA
Sheba litaelo tsa ho kenya mochine oa khatello ea 800326.

Kemiso ea Seteishene sa Phallo

1. Khetha sebaka se ntseng se hola sa seteishene sa phallo. Hangata lipolane tsa kaho li bontša sebaka sa ho hlongoa. Haeba ho se sebaka se boletsoeng, hangata seteishene sa phallo se kentsoe holimo ho dampmoetsi oa mesebetsi.
   TLHOKOMELO
   • Setšoantšo sa 5 se fana ka li-diameter tsa bolelele bo otlolohileng tse hlokahalang hore seteishene sa phallo se sebetse hantle.
   • TSI® e khothaletsa ho kenya seteishene sa phallo holimo ho damper (pele). TSI® ha e khothaletse ho kenya seteishene sa phallo tlase (kamora) damper. Haeba seteishene sa phallo se tlameha ho beoa tlase ho noka, bonyane bolelele ba likotopo tse 4 tse otlolohileng lipakeng tsa damper le seteishene sa phallo lia hlokahala. Ho phaella moo, seteishene sa phallo se tlameha ho potoloha 90o (perpendicular) ho tloha ho dampboemo ba shaft. Bonyane ba bolelele bo otlolohileng bo bonts'itsoeng ke bonyane bo felletseng.
2. Cheka lesoba la 1-1/4" lehlakoreng la mosebetsi oa kotopo. Haeba probe e le telele ho feta lisenthimithara tse 18, phunya lesoba la 5/16″ ka kotloloho ho tloha lesobeng la 1-1/4” (Setšoantšo sa 5).
3. Tsamaisa gasket ea foam seteisheneng sa phallo, 'me u kenye mosebetsing oa likotopo. Kenya seteishene sa phallo ka lesoba la 1-1/4 ″, le ka har'a lesoba la 5/16 ″ (haeba ho hlokahala). Ho probes 18 inches kapa ho feta hokela nate pheletsong e khoele ea seteishene sa phallo (5/16" hole end).
4. Fetola seteishene sa phallo ho fihlela motsu oa pontšo ea moea o lumellana le tsela e nepahetseng ea phallo ea moea.
5. Sekela seteishene sa phallo hore se be teng ka likurufu tsa tšepe tsa lakane (likurufu ha li fanoe ke TSI®). Ho li-inch tse 18 le liteishene tsa phallo tse telele li tiisa nate ea 5/16”. Sesebelisoa se felileng se lokela ho shebahala joalo ka Setšoantšo sa 6.
   
6. Netefatsa hore li-jumpers holim'a transducer ea khatello li kentsoe ka nepo, ho ea ka Setšoantšo sa 7. Lebelo la kamehla la khatello ea transducer ke 0 ho 0.5 in. H2O.
7. Kenya mochine oa khatello ka har'a maoto a 10 ho tloha seteisheneng sa phallo. Transducer e tlameha ho kenngoa leboteng sebakeng se nepahetseng ho ea ka Setšoantšo sa 8 (li-screws ha li fanoe).
   TLHOKOMELO
   O SE KE oa kenya transducer ea khatello siling, ductwork kapa libakeng tse thothomelang. Sebaka seo u se ratang se leboteng le haufi le seteishene sa phallo.
8. Matha mela e 'meli ea 1/4” ea moea (20' e kenyelelitsoe) lipakeng tsa seteishene sa phallo le transducer ea khatello ebe o hokela.
   

   Seteishene sa Phallo		Transducer ea Khatello
   Total Static	ho ho	Hi Lo

   Lekola habeli hore li-tubing tsa moea li entsoe ka nepo, li lutse hantle, 'me li lekana hantle.

9. Sheba litšoantšo tsa lithapo bakeng sa lithapo tse nepahetseng (Setšoantšo sa 10 le Setšoantšo sa 11). Mohala o felisitsoe ho transducer ea khatello le ho DIM.
   TLHOKOMELO
   O SE KE oa kenya transducer ea khatello siling, ductwork kapa libakeng tse thothomelang. Sebaka seo u se ratang se leboteng le haufi le seteishene sa phallo.
   

Damper/Actuator ho kenya

TLHOKOMELO
Hangata litšoantšo tsa moaho li khetholla damper sebaka le tlhophiso e ntseng e eketseha. Ba nka sebaka sa litataiso tse ka tlase.

1. Li-actuator li romelloa ka sekepe ho ea damper. Ha ho na liphetoho tse hlokahalang pele ho ho kenya kopano.
2. The dampe tlameha ho kenngoa le damper shaft e bapileng le fatše (Setšoantšo sa 9).
3. Slip-fit ​​dampers mount KA HAR'A mosebetsi oa likotopo. Flanged dampho ea mosebetsing oa duct. Ha ho ductwork e ka bang ka hare ho dampkapa ho kena-kenana le damper rotation.
4. Ho thella ho lekana dampho tsamaisa mosebetsi ho netefatsa dampe potoloha hantle. E 'ngoe: sebelisa li-screw tse 1-inch kapa tse khuts'oane. Etsa bonnete ba hore li-screw ha li kena-kenane le dampho potoloha ha lehare; damplehare le potoloha ka ntle ho dampsleeve ea. Bolt flanged dampka mokhoa o sireletsehileng ho li-ductwork, empa u se ke ua "qobella" dampho lekana (ho holofatsa damper).
5. Sheba litšoantšo tsa lithapo bakeng sa lithapo tse nepahetseng (Setšoantšo sa 10 le Setšoantšo sa 11). Mohala o felisitsoe ho damper/actuator le ho DIM.
   
   

Ho kenya Transformer

Li-transfoma li fanoe bakeng sa DIM/AOC, e 'ngoe le e 'ngoe damper/actuator, le seteishene se seng le se seng sa phallo (TSI®).
TLHOKOMELO
E mong le e mong damper/actuator le flow station e na le transformer e arohaneng e lokelang ho kengoa. U SE KE UA terata lisebelisoa tse fetang bonngoe ka transformer.

TLHOKOMELO
Etsa bonnete ba hore ha ho na motlakase o kentsoeng ho fihlela lithapo tsohle li felile.
Latela likhoutu tsohle tse sebetsang tsa motlakase, 'me u be le basebetsi ba tšoanelehang ba kentseng transformer.
HLOKOMELA
115 volt, mohato o le mong, mohloli oa matla oa 60 Hertz oa hlokahala ho matlafatsa 800420 transformer. Haeba TSI® Transformer e sa kenngoa, 24 volt e laoloang, karolo e le 'ngoe, mohloli oa matla oa 60 Hertz o hlokeha ho matlafatsa molaoli.

1. Kenya lebokose la motlakase la 4″ x 4″ x 1-1/2” sebakeng se loketseng ka har'a maoto a 20 (cable ea transfoma e bolelele ba 25') ho tloha sesebelisoa se kengoang: Adaptive Offset Controller, damper/actuator, kapa seteishene sa phallo. Sesebelisoa se seng le se seng se tlameha ho ba le transformer e arohaneng. U SE KE UA KENYA LISEBETSI TSE MANGATA HO TRANSFORER E LE 'NGOE.
2. Matha 115 volt, mohato o le mong, 60 hertz line voltage (115 VAC) ho lebokose la motlakase oa transformer. Latela likhoutu tsohle tse sebetsang tsa motlakase.
3. Connect 115 VAC line voltage HOT terata ho ea ho terata e TŠOHO holim'a transformer le terata e NEUTRAL ho ea ho terata e TŠEEU ho transformer (Setšoantšo sa 12).
4. Hokela terata e RED ho 800414 thapo ea transfoma ho e 'ngoe ea lithapo tse TŠEHLA ho terata le terata e TŠEFI ho terata e setseng e TŠEHLA.
5. Shebella transformer lebokoseng la motlakase.
6. Matha thapo ea transformer ho tloha lebokoseng la motlakase oa transformer ho ea sesebelisoa. Eba le bonyane li-inch tse 8 tsa thapo e eketsehileng sesebelisoa pele u fokotsa thapo hore e be bolelele. Lisebelisoa tsa terata ho ea ka setšoantšo sa 10 le sa 11.
   Haeba o hloka thuso ho kenya sistimi, letsetsa TSI® Customer Service ho 651-490-2860 kapa 1-800-680-1220.

MABAPI KAMPANI

• TSI Incorporated - Etela rona websebaka www.tsi.com bakeng sa lintlha tse ling.
• USA Mohala: +1 800 680 1220
• Mohala oa UK: +44 149 4 459200
• France Mohala: +33 1 41 19 21 99
• Jeremane Mohala: +49 241 523030
• Mohala oa India: +91 80 67877200
• China Mohala: +86 10 8219 7688
• Singapore Mohala: +65 6595 6388

Litokomane / Lisebelisoa

TSI SureFlow 8681 Adaptive Offset Controller [pdf] Buka ea Taelo 8681, SureFlow 8681 Adaptive Offset Controller, SureFlow 8681, SureFlow, 8681, SureFlow Adaptive Offset Controller, 8681 Adaptive Offset Controller, Adaptive Offset Controller, Adaptive Controller, Offset Controller, Controller

Litšupiso

• Bukana ea Mosebelisi