TRUclad logoTRUclad Composite Cladding KEKELO MOTELELI

Ho kenya Cladding Horizontally

  1. TRUclad Composite Cladding - figure 1 Install wooden / aluminium or composite battens to desired area at 400mm centres.TRUclad Composite Cladding - figure 2
  2. Please ensure where boards butt together additional battens are added as per photo.TRUclad Composite Cladding - figure 3
  3. Install starter bar, ensuring that it is at least 30mm from the ground.TRUclad Composite Cladding - figure 4
  4. Now install cladding board, ensuring the cladding board is resting into the starter trim.TRUclad Composite Cladding - figure 5
  5. Secure cladding board in place by screwing supplied screws in pre drilled holes. Please remember not to screw to tight, TRUclad needs to be able to expand and contract.TRUclad Composite Cladding - figure 6
  6. Repeat process to achieve desired height.TRUclad Composite Cladding - figure 7
  7. Finish cladding area by using angle trim, secure using coloured screws, please ensure  you use countersink drill bit supplied in order to pre drill holes.

TRUclad ke ea Falcon Timber, Setho sa Consolidated Timber Holdings Group. Falcon Timber Ltd e ke ke ea nka boikarabello bakeng sa mathata a ho instola a hlahang moo batho ba kenyang (li)sebetsi ba sa kang ba latela tataiso ea ho instola, ho fella ka hore tiisetso e hlakoloe.
Falcon Timber Ltd e ke ke ea jara boikarabello ba ho hopa le/kapa ho hlokomela bofokoli ba masela a kopantsoeng a TRUclad.
Ho fumana lintlha tse ling ka kopo etela www.falcon-timber.com kapa imeile truclad@falcon-timber.com

Ho kenya Cladding Vertically

  1. TRUclad Composite Cladding - figure 8Install wooden / aluminium or composite battens to desired area at 400mm centres.TRUclad Composite Cladding - figure 9
  2. Please ensure where boards butt together additional battens are added as per photo.TRUclad Composite Cladding - figure 10
  3. Install starter bar, ensuring that it is at least 30mm from the ground.TRUclad Composite Cladding - figure 11
  4. Now install cladding board, ensuring the cladding board is resting into the starter trim.TRUclad Composite Cladding - figure 13
  5. Secure cladding board in place by screwing supplied screws in pre drilled holes. Please remember not to screw to tight, TRUclad needs to be able to expand and contract.TRUclad Composite Cladding - figure 14
  6. Repeat process to achieve desired length.TRUclad Composite Cladding - figure 15
  7. Finish cladding area by using angle trim, secure using coloured screws, please ensure you use countersink drill bit supplied in order to pre drill holes.

TRUclad ke ea Falcon Timber, Setho sa Consolidated Timber Holdings Group. Falcon Timber Ltd e ke ke ea nka boikarabello bakeng sa mathata a ho instola a hlahang moo batho ba kenyang (li)sebetsi ba sa kang ba latela tataiso ea ho instola, ho fella ka hore tiisetso e hlakoloe.
Falcon Timber Ltd e ke ke ea jara boikarabello ba ho hopa le/kapa ho hlokomela bofokoli ba masela a kopantsoeng a TRUclad.
Ho fumana lintlha tse ling ka kopo etela www.falcon-timber.com kapa imeile truclad@falcon-timber.com
For more details and technical information about TRUclad – please get in touch with  your local distributor.

TRUclad Composite Cladding - logoTRUclad is owned by Falcon Timber, a Consolidated Timber Holdings Group Member
Ho fumana lintlha tse ling, ka kopo etela www.falcon-timber.com
Falcon Timber Ltd e na le tokelo ea ho fetola litlhaloso ntle le tsebiso.

Litokomane / Lisebelisoa

TRUclad Composite Cladding [pdf] Tlhophiso Tataiso
Ho koaheloa ka motsoako, ho roala

Litšupiso

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *